Abstract:In this work, effective methods for monitoring friction and wear of journal bearings integrated in future UltraFan® jet engines containing a gearbox are presented. These methods are based on machine learning algorithms applied to Acoustic Emission (AE) signals. The three friction states: dry (boundary), mixed, and fluid friction of journal bearings are classified by pre-processing the AE signals with windowing and high-pass filtering, extracting separation effective features from time, frequency, and time-frequency domain using continuous wavelet transform (CWT) and a Support Vector Machine (SVM) as the classifier. Furthermore, it is shown that journal bearing friction classification is not only possible under variable rotational speed and load, but also under different oil viscosities generated by varying oil inlet temperatures. A method used to identify the location of occurring mixed friction events over the journal bearing circumference is shown in this paper. The time-based AE signal is fused with the phase shift information of an incremental encoder to achieve an AE signal based on the angle domain. The possibility of monitoring the run-in wear of journal bearings is investigated by using the extracted separation effective AE features. Validation was done by tactile roughness measurements of the surface. There is an obvious AE feature change visible with increasing run-in wear. Furthermore, these investigations show also the opportunity to determine the friction intensity. Long-term wear investigations were done by carrying out long-term wear tests under constant rotational speeds, loads, and oil inlet temperatures. Roughness and roundness measurements were done in order to calculate the wear volume for validation. The integrated AE Root Mean Square (RMS) shows a good correlation with the journal bearing wear volume.

The Wear Condition Monitoring of Main Journal Bearing for Diesel Engine by Analyzing Strain Signals

Online monitoring of oil film thickness of journal bearing in aviation fuel gear pump

An improved adaptive VMD method and its application in wear condition monitoring of main bearing

Journal Bearing Wear Monitoring via On-Line Visual Ferrography

Journal Bearing Performance Prediction Using Machine Learning and Octave-Band Signal Analysis of Sound and Vibration Measurements

Study on coupling transient mixed lubrication and time-varying wear of main bearing in actual operation of low-speed diesel engine

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Analysis of Factors Affecting Lubrication Performance of Main Bearings of Service Diesel Engine Based on Orthogonal Design Method1

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Friction and Wear Monitoring Methods for Journal Bearings of Geared Turbofans Based on Acoustic Emission Signals and Machine Learning

Research on an on-line wear condition monitoring system for marine diesel engine

New health indicators for the monitoring of bearing failures under variable loads

Wear Condition Monitoring and Working Pattern Recognition of Piston Rings and Cylinder Liners Using On-Line Visual Ferrograph

Numerical study on lubrication performance of engine main bearing with rough surface considering axial movement of crankshaft

Monitoring of the Wear Condition and Research on the Wear Process for Running Equipment

Numerical analysis on lubrication failure of main bearings with lemon-shaped bearing shells in high-power diesel engine

Research on the thermohydrodynamic lubrication performance of engine main bearing with rough surface considering the axial motion and deformation of crankshaft

Monitoring of Lubricant Film Failure in a Ball Bearing Using Ultrasound

The Condition Monitoring of Large Slewing Bearing Based on Oil Analysis Method

Approach to health monitoring and assessment of rolling bearing

Wear monitoring of bearing steel using electrostatic and acoustic emission techniques