Abstract:The efficiency of processes involving frictional contacts between surfaces is often characterized by wear rates or friction coefficients. However, the classification and forecasting of wear rates in friction related processes is a real industrial challenge that is unsolved today. Hence, an on-line monitoring system able to classify wear rate can be crucial for many industries as it could help in preventing catastrophic failures. Applications include lifetime assessment of various industrial components where a range of wear failures occur such as scuffing (a typical sudden failure mechanism). These tribological processes can now be sensorized, and the corresponding sensor signatures can be modelled and monitored using state-of-the-art Machine learning (ML) algorithms. In this study, we use an Acoustic Emission (AE) sensor and ML frameworks to classify different wear categories simulated with a customized pin-on-disc tribometer. A real-time investigation of the wear track is necessary to find out the origins of the wear scar visible at the surface. To achieve this objective, the experiments were conducted on a pin-on-disc tribometer equipped with a Digital Holographic Microscope (DHM). Experiments were carried out using alumina and steel balls against steel discs at room temperature. Real-time DHM images of the wear track surface were recorded for each lap at the same position. An acoustic emission sensor recorded the AE signals during the complete duration of experiments. The AE signatures, in combination with the real-time DHM images, were correlated as input and ground truth labels for the ML algorithm. Several ML frameworks were compared; they are support vector machine, logistic regression, XGBoost, random forest, neural networks, k-Nearest Neighbor, quadratic discriminant analysis and Naive Bayes. The classifier was trained to differentiate the acoustic emission features of the different wear rates. Most ML algorithms had an average classification accuracy above 80%, and the highest was obtained with support vector machine (84.7%). The classification accuracy can be improved by combining two neighboring categories with limited differences in terms of wear rate. Hence, the proposed method has a significant industrial potential for in-situ and real-time quality monitoring of wear processes since it requires minimum modifications of commercially available industrial machines.

Wear monitoring of bearing steel using electrostatic and acoustic emission techniques

Experimental Investigation of Correlation Between Attrition Wear and Features of Acoustic Emission Signals in Single-Grit Grinding

Feasibility Study of Real-Time Monitoring of Pin Connection Wear Using Acoustic Emission

A Time-Frequency Based Approach for Acoustic Emission Assessment of Sliding Wear

Research on Electrostatic Monitoring of Tribo-Contacts with Dynamic Adaptive Fusion Method

Monitoring Wear of a Deep Groove Ball Bearing Using Ultrasonic Reflection

Adhesive and abrasive wear studies using acoustic emission techniques

Sliding wear studies using acoustic emission

The relationship between acoustic emissions and wear particles for repeated dry rubbing

Real time measurement of wear and surface damage in the sliding wear of alumina

Early wear detection and its significance for condition monitoring

Wear Degree Quantification of Pin Connections Using Parameter-Based Analyses of Acoustic Emissions

A novel non-contact method for monitoring the Acoustic Emission from mixed EHL contacts

Wear monitoring method of water-lubricated polymer thrust bearing based on ultrasonic reflection coefficient amplitude spectrum

A correlation analysis method for analyzing tribological states using acoustic emission, frictional coefficient, and contact resistance signals

Lubrication Condition Monitoring and Evaluation of Rolling Bearing Based on Acoustic Emission.

Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope

Acoustic Emission and Its Relationship with Friction and Wear for Sliding Contact

On-line metallic wear diagnosis of unlubricated contacts by using self-generated voltage

Monitoring Lubrication and Wear in-situ by triboelectrification Under Vacuum Conditions

Defect Diagnosis for Rolling Element Bearings Using Acoustic Emission