Abstract:Two methods of acoustic emission and vibration in the application of rolling bearing fault diagnosis of crack are studied,and the superiority of these two methods in the early fault diagnosis are compared. The electric spark technology is adopted to make two kinds of cracks,0.5 mm and 0.8 mm,on the inner ring of roller bearing,to simulate the inner ring crack fault of rolling bearing under the actual condition. In both low speed(10 r/min) and high speed(1 000 r/min) cases,through testing,the acoustic emission and vibration signals are measured respectively for two kinds of crack faults of rolling bearing. The time-frequency characteristics of vibration and acoustic emission signals under different rotating speed and crack faults of the rolling bearing are analyzed and compared. Waveform analysis and envelope spectrum analysis of the signal data are conducted. The experimental results show that the acoustic emission signal has nothing to do with the modulation signal;therefore the acoustic emission signal envelope spectrum analysis can effectively analyze the fault characteristic frequency of the signal. Under the condition of weak fault,acoustic emission signal is more sensitive than vibration signals,while vibration signal is more accurate for diagnosing more serious fault,which means the acoustic emission technology is more conducive to early detection of fault,and acoustic emission technology can be used as the supplement of the vibration analysis technique for fault detection.

Defect Diagnosis for Rolling Element Bearings Using Acoustic Emission

REVIEW OF DIAGNOSIS OF ROLLING ELEMENT BEARINGS DEFAULTS BY MEANS OF ACOUSTIC EMISSION TECHNIQUE

Observation of Time-Frequency Characteristics of the Acoustic Emission from Defects in Rolling Element Bearings

Bearing Fault Detection Based on Acoustic Emission Technique

Application of Acoustic Emission Technique in Diagnosis of Early Rolling Bearing Faults

Rolling Bearing Failure Analysis Based on Vibration and Acoustic Emission Technology

Fault Diagnosis of Rolling Bearings Based on Cyclical Impact Count of Acoustic Emission

Lubrication Condition Monitoring and Evaluation of Rolling Bearing Based on Acoustic Emission.

Defects Diagnosis of Bearing by Means of Acoustic Emission and Continuous Wavelet Transform

An Optimized Kurtogram Method for Early Fault Detection of Rolling Element Bearings Using Acoustic Emission

Fusion Fault Diagnosis Approach to Rolling Bearing with Vibrational and Acoustic Emission Signals

Early Detection of Subsurface Fatigue Cracks in Rolling Element Bearings by the Knowledge-Based Analysis of Acoustic Emission

New evaluation method for defects propagation in toroidal roller bearings using dominant frequency of acoustic emission

The Ae Law Of Sliding Bearings In Rotating Machinery And Its Application In Fault Diagnosis

Bearing Fault Detection Based on Empirical Wavelet Transform and Correlated Kurtosis by Acoustic Emission.

Experimental Study on Condition Diagnosis of Sliding Bearings Based on Acoustic Emission Detection

Acoustic Emission Signal Feature Extraction for Bearing Faults Using ACF and GMOMEDA

TFC-TFECR feature extraction and state recognition of acoustic emission signal of cylindrical roller bearing

Diagnosis of rolling element bearing fault using acoustic signal

A Fault Diagnosis Scheme of Rolling Element Bearing Based on Near-Field Acoustic Holography and Gray Level Co-Occurrence Matrix

Approximate Entropy Analysis of the Acoustic Emission from Defects in Rolling Element Bearings