Abstract:A line contact tribo-pair is a key mechanism unit in rolling bearings, which is often characterized by ultra-high contact pressure and ultra-thin oil film. Elastohydrodynamic lubrication is often adopted to characterize the lubrication state of such a tribo-pair. As a primary parameter for elastohydrodynamic lubrication, the oil film thickness is often evaluated with simplified theoretical models or complicated measurements. So far, a comprehensive verification of the lubrication states in a real line-contact tribo-pair, however, is rarely reported. Focusing on the roller/ring tribo-pair of a wet-lubricated rolling bearing under pure rolling conditions, this study investigates the lubrication states by integrating multiple theories. Five regions including isoviscous hydrodynamic, piezoviscous hydrodynamic, elastohydrodynamic lubrication, mixture lubrication, and boundary lubrication regions can be identified using the framework. Then, validation experiments are carried out on a line contact tribo-pair test rig under the same operating conditions applied in the theoretical analysis. The oil film thickness is measured by the ultrasonic method. The analysis results demonstrate that only two regions, the elastohydrodynamic lubrication and mixture lubrication regions, can be identified using the experimental data. The identified elastohydrodynamic lubrication and mixture lubrication regions are consistent with theoretical analysis; and the Blok equation and elastohydrodynamic lubrication theory are suggested to calculate the oil film thickness in the elastohydrodynamic lubrication and mixture lubrication regions, respectively. Moreover, the oil film thickness calculated by the Dowson equation is larger than that based on the elastohydrodynamic lubrication theory due to a different viscous pressure equation.

Monitoring Lubrication and Wear in-situ by triboelectrification Under Vacuum Conditions

A Novel Self-Powered Triboelectric Sensor for Early Waring of Lubrication Failure

Characterizing Superlubricity by Tribovoltaic Effect

Research on Electrostatic Monitoring of Tribo-Contacts with Dynamic Adaptive Fusion Method

Triboelectric behaviors mechanism of continuous rotary friction pairs in liquid lubrication and its potential application

Toward Low Friction in High Vacuum by Designing Textured A-C/il Duplex Lubricating Film

Research on tribological condition on-line monitoring system

Wear monitoring of bearing steel using electrostatic and acoustic emission techniques

Real-Time and Online Lubricating Oil Condition Monitoring Enabled by Triboelectric Nanogenerator

Friction and wear performance of dual lubrication systems combining WS2–MoS2 composite film and low volatility oils under vacuum condition

Applications of Electrostatic Sensor for Wear Debris Detecting in the Lubricating Oil

On-line metallic wear diagnosis of unlubricated contacts by using self-generated voltage

Combined solid and liquid film lubrication for nanopositioning and nanomeasurement machines | Kombinierte fest- und flüssigschmierung für nanopositionier- und nanomessmaschinen

Electrostatic monitoring of wind turbine gearbox on oil-lubricated system

Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage

Influence of interface liquid lubrication on triboelectrification of point contact friction pair

Topography Characterization of Friction Pairs During the Real-Time Wear Process in Dry Condition

Exploring electrical metrics for tribology measures in oil films: System design, analysis principle and physical effects

Lubrication State Identification of the Line Contact Tribo-Pair under a Pure Rolling Condition with Ultrasonic Method

Development of High-pressure Micro-clearance Tribological Measuring Apparatus

Research on Wear Mechanism of Solid Lubrication Bearing in Vacuum Environment