Abstract:Alkyl-substituted dibenzothiophenes such as 4,6-dimethyldibenzothiophene are a kind of typical refractory sulfur compound in fuel oil. Herein, three-dimensional ordered macro–mesoporous (3DOM) tungsten oxide catalysts were successfully prepared for aerobic oxidative desulfurization of 4,6-dimethyldibenzothiophene. The experimental results indicated that the as-prepared material 3DOM WOx-400 not only contained a hexagonal packed nanoporous structure but also abundant oxygen defects on its skeleton, exhibiting aerobic oxidative desulfurization of over 99% in 4 h. Moreover, sulfur removal could still reach 99% after recycling five times. Through free radical capture experiments, the superoxide radical is reasonably proposed in the mechanism. This work would provide a feasible route to develop highly efficient nanoporous materials for desulfurization of fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02639?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02639</a>.TGA profiles of the precursor with PMMA (A) and without PMMA (B) (Figure S1); FT-IR spectra of the precursor mixture at different calcination stages (Figure S2); SEM image of the PMMA sphere alloy as the template (Figure S3); macropore diameter distribution of 3DOM WOx-400 (Figure S4); Raman spectrum of commercial WO3 (Figure S5); XPS full-scan spectra of various samples (Figure S6); comparison on W 4f peaks of 3DOM WOx-400 and WOx-400 (Figure S7); W 4f core-level of 3DOM WOx-300 and 3DOM WOx-500 (Figure S8); EPR spectra of various samples (Figure S9); effect of the reaction temperature on sulfur removal in the desulfurization system (Figure S10); GC–MS analysis for the extractant of the catalyst phase after the reaction (Figure S11); SEM images of recycled 3DOM WOx-400 (Figure S12); FT-IR spectra of fresh and recycled 3DOM WOx-400 (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02639/suppl_file/an0c02639_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication of Tungstate Metal Foams As Efficient Catalysts for Dimethyl Sulfoxide Oxidation in a Microreactor

Preparation of CuWO4 Foam and Its Use As a Heterogeneous Catalyst for Dimethyl Sulfoxide Oxidation in a Scale-Up Microreactor

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Selective Oxidation of Methanol to Dimethoxymethane over Iron and Vanadate Modified Phosphotungstate

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Tungsten-containing MCF Silica As Active and Recyclable Catalysts for Liquid-Phase Oxidation of 1,3-Butanediol to 4-Hydroxy-2-butanone

Enhancing Oxygen Activation Ability by Composite Interface Construction over a 2D Co3O4-Based Monolithic Catalyst for Toluene Oxidation

FABRICATION OF NICKEL FOAM BASED MnO2 MONOLITHIC CATALYSTS AND ITS APPLICATION IN CATALYTIC ELIMINATION OF TOLUENE

Fabrication of bimetallic MOF with 2D nanosheets structure and rich active sites for enhanced removal of organic pollutants by activation of peroxymonosulfate

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Aerobic Oxidative Desulfurization by Nanoporous Tungsten Oxide with Oxygen Defects

Sintering- and oxidation-resistant ultrasmall Cu(I)/(II) oxides supported on defect-rich mesoporous alumina microspheres boosting catalytic ozonation

Building the Confined CoS2/MoS2 Nanoreactor Via Interface Electronic Reconfiguration to Synchronously Enhance Activity and Stability of Heterogeneous Fenton-like Reactions

Microfluidic Synthesis of ZnWO4 Nanoparticles and Its Performance in DMSO-containing Wastewater Treatment

Highly Efficient Tungsten Trioxide Containing Mesocellular Silica Foam Catalyst in the O-heterocyclization of Cycloocta-1,5-diene with Aqueous H2O2

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Effective controlling of Ni3S2/MoS2 porous hollow spheres on Ni foam by non‐ionic surfactant micelles for oxygen evolution reaction

A novel UiO-66 encapsulated 12-silicotungstic acid catalyst for dimethyl ether synthesis from syngas

Fabrication of γ-Al2O3 Nanoarrays on Aluminum Foam Assisted by Hydroxide for Monolith Catalysts

Nickel foam based monolithic catalyst supporting transition metal oxides for toluene combustion: Experimental and theoretical study of interfacial synergistic oxidation and water resistance