Abstract:Converting industrial sludge into catalytic materials for water purification is a promising approach to simultaneously realize effective disposal of sludge and resource of water. However, manipulating the high efficiency remains a huge challenge due to the difficulty in the active sites control of the sludge. Herein, we proposed a constitutive modulation strategy by the combination of hydrothermal and pyrolysis (HTP) for the fabrication of defects-assistant Fe containing sludge-derived carbon catalysts on upgrading performance in peroxymonosulfate (PMS) activation for pollutant degradation. Adjustable defects on dyeing sludge-derived carbon catalysts (DSCC) were achieved by introducing oxygen or nitrogen functional precursors (hydroquinone or p -phenylenediamine) during hydrothermal processes and by further pyrolysis, where O was detrimental while N was beneficial to defect generation. Compared to the DSCC with less defects (DHSC-O), the defect-rich sample (DHSC-2N) exhibited superior catalytic performance of PMS activation for bisphenol A (BPA) elimination ( k = 0.45 min −1 , 2.52 times of DHSC-O), as well as 81.4% total organic carbon (TOC) removal. Meanwhile, the degradation capacity was verified in wide pH range (2.1–8.1) and various aqueous matrices, reflecting the excellent adaptability and anti-interference performance. Furthermore, the continuous-flow experiments on industrial wastewater showed synchronous BPA and chemical oxygen demand (COD) removal, implying great potential for practical application. Solid electron paramagnetic resonance (EPR) and 57 Fe Mösssbauer spectra analysis indicated that the defects acted as secondary active sites for Fe sites, which were beneficial to accelerating the electron transfer process. The only Fe active sites preferred the radical pathway. The controllable reaction tendency provides possibilities for the on-demand design of sludge-based catalysts to meet the requirements of practical wastewater treatment under Fenton-like reaction.

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Designing 3d‐mos2sponge As Excellent Cocatalysts in Advanced Oxidation Processes for Pollutant Control

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

CoFe2O4 with MoS2-xOy Nanosheets As a Co-catalyst for Enhanced Activation of Peroxydisulfate in Advanced Oxidation Processes

Facile Preparation of Iron Oxide Doped Fe-MOFs-MW As Robust Peroxydisulfate Catalyst for Emerging Pollutants Degradation.

N-doped carbon intercalated Fe-doped MoS2 nanosheets with widened interlayer spacing: An efficient peroxymonosulfate activator for high-salinity organic wastewater treatment

N-doped carbon intercalated Fe-doped MoS<sub>2</sub> nanosheets with widened interlayer spacing: An efficient peroxymonosulfate activator for high-salinity organic wastewater treatment

Sulfur doped Porous Carbon Sheets Embedded with Rich Iron Sites for the 1O2 Dominated Peroxymonosulfate Activation

Pivotal Roles of MoS2 in Boosting Catalytic Degradation of Aqueous Organic Pollutants by Fe(II)/PMS

Ternary FeS/-Fe<sub>2</sub>O<sub>3</sub>@N/S-doped carbon nanohybrids dispersed in an ordered mesoporous silica for efficient peroxymonosulfate activation

An Effective Heterogeneous Iron-Based Catalyst to Activate Peroxymonosulfate for Organic Contaminants Removal

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Highly Dispersed Fe7S8 Anchored on Sp2/sp3 Hybridized Carbon Boosting Peroxymonosulfate Activation for Enhanced EOCs Elimination Though Singlet Oxygen-Dominated Nonradical Pathway

Ultrafast degradation of organic pollutants in an Fe3O4-CoS2-x activated persulfate catalytic system with an Fe-Co catalytic cycle involving oxygen and sulfur vacancies

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

Boosting Efficient Removal of Organic Pollutants by Sulfur Modified Hollow MnFe2O4 Nanocage: Synergist of Three-Dimensional Structure and Reactive Species

FeOOH@MoS2 As a Highly Effective and Stable Activator of Peroxymonosulfate-Based Advanced Oxidation Processes for Pollutant Degradation

Toward Practical Water Decontaminations Via Peroxymonosulfate Nonradical Oxidation: the Role of Cocatalyst MoS2 with Sulfur Vacancies

N, S Co-Doped Porous Carbon to Accelerate Fe3+/Fe2+ Redox Cycle for Peroxymonosulfate Activation

Peroxymonosulfate activation by graphene oxide-supported 3D-MoS2/FeCo2O4 sponge for highly efficient organic pollutants degradation

Efficient activation of peroxymonosulfate by iron-containing mesoporous silica catalysts derived from iron tailings for degradation of organic pollutants