Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Low-power and Wide-Band 1 × 8 Silica Waveguide Optical Switch

Compact Su8-Silica Hybrid Thermo-Optic Switch With Low Power Consumption

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

1 x N (N=2, 8) Silicon Selector Switch for Prospective Technologies at the 2 m Waveband

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Design and Performance Analysis of Silica-Based Thermo-Optical Switches Operating in O-Band and C-Band

Mach-Zehnder Based Optical Switches in Silicon-On-Insulator

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

A Compact Silicon Nano-Wire Waveguide Optic Switch

High-performance Silicon PIN Diode Switches in the 2-Μm Wave Band.

A 4×4 MMI-MZ optical switch matrix on SOI based on carrier injection

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Hitless Wavelength-Selective Switch Using a Single Microring Resonator Assisted With a Symmetric MZI

Fast and Low-Power Thermo-Optic Switch Based on Organic-Inorganic Hybrid Strip-Loaded Waveguides.

Hitless Wavelength-Selective Switch Based on Single Microring Resonator Embedded with an Equal Armed MZI

Highly integrated 3×3 silicon thermo-optical switch using a single combined phase shifter for optical interconnects.

Multiband Optical Switch Technology

A CMOS Compatible 1&#x00d7;3 Optical Switch Based on Silicon on Insulator