Abstract:With the increasing demand for the resilient capacity of transformers in high-proportion renewable energy grids, the overload capacity of transformers and the thermal conductivity of winding insulation materials have been put forward as important requirements. In response to these requirements, a novel ceramic high temperature tolerance insulation winding is proposed in this paper and is applied in a ceramic insulated winding transformer. A combination of simulation and experimentation is used to analyze the thermal-flow characteristics of this transformer. The temperature and flow field distribution characteristics of transformers with both winding insulation methods (ceramic and Nomex paper) are compared. The internal mechanism of reflux near the iron core and high voltage winding under forced air cooling is clarified. A superior outside cooling condition is obtained. A prototype ceramic insulated winding transformer is developed and tested to verify the accuracy of the simulation model. The results show that the hotspot temperature of the ceramic insulated winding transformer under natural cooling is 10.7% lower than that of the Nomex paper insulated winding transformer. With forced air cooling of 2, 3, 4, 5, and 6 m/s applied at the bottom, the hotspot temperature of the ceramic insulated winding transformer is 11.4%, 10.5%, 9.7%, 14.0%, and 17.8% lower than that of the Nomex paper insulation winding transformer, respectively. Under forced air cooling, a reflux phenomenon is observed in both transformers in the vicinity of the iron core and high voltage winding due to the formation of adverse pressure gradient region and wall viscous force blocking. The strength of the reflux is affected by the magnitude of the forced air cooling flow velocity and the construction of the transformer. The optimal range of the external cooling flow velocity for the ceramic insulated winding transformer is 3–4 m/s. The errors between the simulated temperature and the measured temperature at the nine monitoring points of the prototype are all less than 5%, which verifies the effectiveness of the simulation model. The experimental and theoretical basis for the design and application of resilient capacity dry type transformers is provided by this research.

Device Design for the Study of Radial Short-Circuit Withstand Ability of Transformer Windings for Epoxy Bonded Continuously Transferred Conductors

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Research on Short-Circuit Vibration of Power Transformer

Simulation of Transformer Windings Mechanical Characteristics During the External Short-Circuit Fault

Mechanical Properties of Epoxy-Bonded Continuously Transposed Conductors(CTCs) at High Temperature and Its Influence on Mechanical Strength of Windings

Numerical and Experimental Investigations on Transformer Winding Damages under Multiple Short-Circuit Faults

Study on the Damage to Transformer Windings under Multiple Short-Circuit Faults

Numerical Investigations for Vibration and Deformation of Power Transformer Windings under Short-Circuit Condition

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

Analysis of Mechanical Characteristics of Transformer Windings under Short Circuit Fault

Stress Distribution Characteristics of Composite Wire-Paper Winding Structure under the Radial Electromagnetic Force

Deformation Simulation and Analysis of Power Transformer Windings

Simulation and Analysis of Dynamic Characteristics of Transformer Winding in Short-Circuit Fault by Finite Element Method

A FEM-based simulation of electromagnetic forces on transformer windings under short-circuit

Thermal-flow characteristics analysis of a novel resilient capacity ceramic insulated winding dry type transformer

Simulation and Analysis of Power Transformer Winding Vibration and Deformation under External Short-circuit Faults

Experimental Research On Cumulative Deformation Of Transformer Winding Induced By Short-Circuit Current Impacts

Computation and Analysis of Power Transformer Winding Damage Due to Short Circuit Fault Based on 3-D Finite Element Method

Research on Temperature Field Simulation of Resin Insulated Dry-Type Power Transformers

Mechanical Characteristics Analysis of Defective Transformer Windings under Short-Circuit Fault Using 3-D FEM

Study on Thermal Characteristics of Winding under Inter-Turn Fault of Oil-Immersed Transformer