Abstract:In this paper, a temperature measurement system with NTC (Negative Temperature Coefficient) thermistors was designed. An MCU (Micro Control Unit) primarily operates by converting the voltage value collected by an ADC (Analog-to-Digital Converter) into the resistance value. The temperature value is then calculated, and a DAC (Digital-to-Analog Converter) outputs a current of 4 to 20 mA that is linearly related to the temperature value. The nonlinear characteristics of NTC thermistors pose a challenging problem. The nonlinear characteristics of NTC thermistors were to a great extent solved by using a resistance ratio model. The high precision of the NTC thermistor is obtained by fitting it with the Hoge equation. The results of actual measurements suggest that each module works properly, and the temperature measurement accuracy of 0.067 °C in the range from −40 °C to 120 °C has been achieved. The uncertainty of the output current is analyzed and calculated with the uncertainty of 0.0014 mA. This type of system has broad potential applications in industry fields such as the petrochemical industry.

What problem does this paper attempt to address?

The paper aims to design a temperature measurement system based on Negative Temperature Coefficient (NTC) thermistors and address the challenges posed by the non-linear characteristics of NTC thermistors by employing a resistance ratio model. Specifically, the objectives of this study include: 1. **Improving temperature measurement accuracy**: Utilize the high sensitivity of NTC thermistors, combined with the resistance ratio model and software algorithms, to enhance the overall accuracy of the temperature measurement system. 2. **Addressing non-linearity issues**: The resistance value of NTC thermistors has a non-linear relationship with temperature, which makes precise measurement difficult. By using the resistance ratio model and accurately fitting the resistance-temperature equation of the NTC thermistor, this non-linear effect is mitigated. 3. **Achieving wide-range temperature measurement**: The designed system can achieve high-precision temperature measurement in the range of -40°C to 120°C, suitable for various industrial application scenarios. 4. **Ensuring output stability**: The system's output current signal (4-20mA) is linearly related to the temperature value, and the output is stable with minimal error, meeting the needs of industrial applications. 5. **Optimizing circuit design**: By reasonably designing the hardware circuit and software algorithms, sources of error in the system are reduced, improving the reliability and accuracy of the entire system. 6. **Reducing costs**: Compared to other temperature sensors (such as platinum resistance), NTC thermistors are less expensive, thus the designed system has better economic benefits. In summary, the main purpose of this paper is to develop a high-precision, wide-temperature-range, low-cost NTC thermistor temperature measurement system to meet the high demands of temperature monitoring in industrial applications.

Design of a Negative Temperature Coefficient Temperature Measurement System Based on a Resistance Ratio Model

An Inaccuracy of +/- 0.5 degrees C Digital Temperature Sensor From-40 degrees C to 125 degrees C With Curvature Correction

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

Design of temperature measurement system guided by thermal dissipation coefficient of NTC thermistor

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

A BJT-Based CMOS Temperature Sensor with Duty-Cycle-Modulated Output and ±0.5°C (3σ) Inaccuracy from −40 °C to 125 °C

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

A Dynamic-Biased Resistor-Based CMOS Temperature Sensor with a Duty-Cycle-Modulated Output

A 0.8V Capacitively-Biased BJT-Based Temperature Sensor with an Inaccuracy of ±0.4°C ($\mathbf{3}\mathbf{\sigma}$) from −40°C to 125°C in 22nm CMOS

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

Capacitor-Reused Cmos Temperature Sensor With Duty-Cycle-Modulated Output And 0.38 Degrees C (3 Sigma) Inaccuracy

Modeling, Characterization and linearization of Negative Temperature Coefficient (NTC) Thermistor and Pressure Sensors

A 1-V Diode-Based Temperature Sensor with a Resolution FoM of 3.1pj•k2 in 55nm CMOS

A High Precision, Wireless Temperature Measurement System for Pervasive Computing Applications

Algorithm Execution Time and Accuracy of NTC Thermistor-Based Temperature Measurements in Time-Critical Applications

A 1770- $\mu$ M 2 Leakage-Based Digital Temperature Sensor with Supply Sensitivity Suppression in 55-Nm CMOS

A simple experiment to determine the characteristics of an NTC thermistor for low-temperature measurement applications

Evaluation of different calibration equations for NTC thermistor applied to high-precision temperature measurement

A 3216 μm2 MOS-Based Temperature Sensor with a Wide Temperature Measurement Range and Linear Readout

Improving the Environmental Temperature Adaptability of an Electric Temperature Measurement Subsystem by Matching Temperature Coefficients of Substitutable Resistors