Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Pre-oxidized Ultramicroporous Carbon Cloth with Ultrahigh Volumetric Capacity and Ultralong Lifespan for Capacitive Desalination

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Great truths are always simple: Preoxidation-tuned cellulose-derived carbon fibers achieving ultrahigh areal desalination capacity in flow-through capacitive deionization

Use of steam to prepare super active carbon with large pore volume for efficient capacitive deionization

Facial synthesis of FeOOH array-anchored carbon fiber as flow-through chloride-capturing electrode for ultrafast and super-stable capacitive deionization

Electrospun Ultrafine Carbon Fiber Webs for Electrochemical Capacitive Desalination

Amino acids functionalized vascular-like carbon fibers for efficient capacitive deionization

Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization

Boron and nitrogen co-doped porous carbon derived from sodium alginate enhanced capacitive deionization for water purification

Cross-stacked super-aligned carbon nanotube/activated carbon composite electrodes for efficient water purification via capacitive deionization enhanced ultrafiltration

Studies Of Activated Carbon Electrodes For Capacitive Seawater Desalination

A dynamic intercalation mechanism in pre-intercalation carbon nanosheets for capacitive deionization cells

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water

Electrochemical capacitive desalination behavior of activated carbon fibers

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

Developing efficient, binder-free 3D porous Ti3C2Tx-MXene electrodes for enhanced capacitive deionization towards desalination

Happy birthday neuroleptics! 50 years later: la folie du doute

Controlled synthesis of ZnO modified N-doped porous carbon nanofiber membrane for highly efficient removal of heavy metal ions by capacitive deionization

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Mesoporous dopamine-modified leaf-like zeolitic imidazolate frameworks derived carbon for efficient capacitive deionization