Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Electrospun Ultrafine Carbon Fiber Webs for Electrochemical Capacitive Desalination

Li-Ion Doped Graphene/Carbon Nanofiber Porous Architectures for Electrochemical Capacitive Desalination

Designed Fabrication of Hierarchical Porous Carbon Nanotubes/graphene/carbon Nanofibers Composites with Enhanced Capacitive Desalination Properties

Graphene Oxide-Embedded Porous Carbon Nanofiber Webs by Electrospinning for Capacitive Deionization

Electrochemical capacitive desalination behavior of activated carbon fibers

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Electrospun Carbon Nanofiber Networks from Phenolic Resin for Capacitive Deionization

Amino acids functionalized vascular-like carbon fibers for efficient capacitive deionization

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Enhanced desalination of electrospun activated carbon fibers with controlled pore structures in the electrosorption process

Studies Of Activated Carbon Electrodes For Capacitive Seawater Desalination

Synthesis and Characterization of Activated Carbon Co-Mixed Electrospun Titanium Oxide Nanofibers as Flow Electrode in Capacitive Deionization

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization

Great truths are always simple: Preoxidation-tuned cellulose-derived carbon fibers achieving ultrahigh areal desalination capacity in flow-through capacitive deionization

Mesoporous Carbon Nanofibers for Supercapacitor Application

Facial synthesis of FeOOH array-anchored carbon fiber as flow-through chloride-capturing electrode for ultrafast and super-stable capacitive deionization

Highly porous activated carbon with multi-channeled structure derived from loofa sponge as a capacitive electrode material for the deionization of brackish water

Electrospun Composites Made of Reduced Graphene Oxide and Activated Carbon Nanofibers for Capacitive Deionization

Tailoring B, N-Enriched Carbon Nanosheets via a Gelation-Assisted Strategy for High-Capacity and Fast-Response Capacitive Desalination

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization