Exceptional capacitive deionization rate and capacity by block copolymer–based porous carbon fibers

Tianyu Liu,Joel Serrano,John Elliott,Xiaozhou Yang,William Cathcart,Zixuan Wang,Zhen He,Guoliang Liu

DOI: https://doi.org/10.1126/sciadv.aaz0906

IF: 13.6

2020-04-17

Science Advances

Abstract:Block copolymer–based porous carbon fibers show ultrahigh capacity and rate for capacitive deionization.

multidisciplinary sciences

What problem does this paper attempt to address?

Capacitive Organic Dye Removal by Block Copolymer Based Porous Carbon Fibers

Joel Marcos Serrano,Assad U. Khan,Tianyu Liu,Zhen Xu,Alan R. Esker,Guoliang Liu

DOI: https://doi.org/10.1002/admi.202000507

IF: 5.4

2020-01-01

Advanced Materials Interfaces

Abstract:Block copolymer based porous carbon fibers (PCFs) have hierarchical pores, high surface areas, and excellent electrical/ion conductivities. Herein, PCF is synthesized from poly(methyl methacrylate)‐block‐poly(acrylonitrile) and utilized for organic dye removal. The PCF contains hierarchical macro‐, meso‐, and micropores with a surface area of 780 m2 g−1. The electrosorptive behavior of PCF is well described by the Langmuir isotherm and the Weber–Morris model. Based on the model, the interconnected hierarchical pores contribute to easy accessibility of dye ions to the inner surface sites within PCF, resulting in a high electrosorption capacity of 1360 mg g−1, reaching ≈87% of the theoretical maximum. The PCF shows a capacity loss of <0.5% over ten cycles during a 240 h operation period. Thanks to the hierarchical pores that allow for rapid ion desorption, the PCF can easily be regenerated. Lastly, depending on the electrode configuration, the PCF can selectively remove anionic dye, cationic dye, or both. The findings herein provide a fundamental understanding of electrosorptive behavior of block copolymer based porous carbon fibers, enabling future development in filtration applications.
Amino acids functionalized vascular-like carbon fibers for efficient capacitive deionization

Yanan Wang,Liuqian Yang,Dandan Ouyang,Dongxu Chen,Hui Zhu,Jiao Yin

DOI: https://doi.org/10.1016/j.jcis.2023.06.069

IF: 9.9

2023-06-19

Journal of Colloid and Interface Science

Abstract:Porous carbons have attracted great attention in capacitive deionization (CDI), benefiting from their high surface areas and abundant adsorption sites. However, the sluggish adsorption rate and poor cycling stability of carbons are still concerns, which are caused by the insufficient ion-accessible networks and the side reactions (the co-ion repulsion and oxidative corrosion). Herein, inspired by the blood vessels in organisms, mesoporous hollow carbon fibers (HCF) were successfully synthesized via a template assisted coaxial electrospinning strategy. Subsequently, the surface charge of HCF was modified by various amino acids (arginine (HCF-Arg) and aspartic acid (HCF-Asp)). Combining structure design and surface modulation, these freestanding HCFs present enhanced desalination rate and stability, in which the hierarchal vasculature facilitates electron/ion transport, and the functionalized surface suppresses the side reactions. Impressively, when HCF-Asp and HCF-Arg serve as cathode and anode respectively, the asymmetric CDI device provides an excellent salt adsorption capacity of 45.6 mg g −1 , a fast salt adsorption rate of 14.0 mg g −1 min −1 and a superior cycling stability up to 80 cycles. In short, this work evidenced an integrated strategy to exploiting carbon materials with outstanding capacity and stability for high-performance capacitive deionization.

chemistry, physical
Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Liyan Liu,Cong Zhao,Fenghua Zheng,Dingfei Deng,Marc A. Anderson,Yang Wang

DOI: https://doi.org/10.1016/j.desal.2020.114794

IF: 11.211

2021-01-01

Desalination

Abstract:Capacitive deionization (CDI) is a promising energy-efficient electrochemical water treatment technology and a scalable electrode having high mass loading is an essential imperative to the success of this technology. A thick CDI electrode was constructed by loading activated carbon particles as the electroactive material into a three-dimensional framework fabricated from a mixture felt of conductive carbon fiber serving as an electron transfer channel and removable yak hair functioning to provide an ion transport pathway. The carbon fiber reduces the electrode electrical resistance and the ultimately removed yak hair creates an ordered macropore array that provides an ion reservoir as well as a conduction channel for reducing ion transport distance inside the electrode. The resulting composite electrode with an optimal carbon fiber and yak hair content shows a specific capacitance of 219.27 F g−1 at 0.1 A g−1 and reaches salt adsorption capacity of 15.75 mg g−1 and average salt adsorption rate of 17.10 mg g−1 h−1 with more than 50% retention after 200 cycles. The designed three-dimensional composite exhibits enhanced deionization and long-term stability that is believed to be a low-cost and simple assembly solution for achieving a high mass loading and scalable electrode for the industrial CDI applications.

engineering, chemical,water resources
Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Chunjie Zhang,Dong Wang,Zhen Wang,Guangshuai Zhang,Zhichao Liu,Jie Wu,Jin Hu,Guangwu Wen

DOI: https://doi.org/10.1002/eem2.12276

2022-03-18

Abstract:Monolithic carbon electrodes with robust mechanical integrity and porous architecture are highly desired for capacitive deionization (CDI) but remains challenging. Owing to the excellent mechanical strength and electroconductivity, commercial carbon fibers cloth (CF) demonstrates great potential as high-performance electrodes for ions storage. Despite this, its direct application on CDI is rarely reported in terms of limited pore structure and natural hydrophobicity. Herein, a powerful metal-organic framework (MOF)-engaged structural regulation strategy is developed to boost the desalination properties of CF. The obtained porous CF (PCF) features hierarchical porous structure and hydrophilic surface providing abundant ions-accessible sites, and continuous graphitized carbon core ensuring rapid electrons transport. The catalytic-etching mechanism involving oxidation of Co and subsequent carbonthermal reduction is proposed and highly relies on annealing temperature and holding time. When directly evaluated as current collector-free CDI electrode, the PCF demonstrates much superior desalination capability than pristine CF, and remarkable cyclic stability up to 20 h with negligible degeneration. Particularly, the PCF-1000 showcases the highest areal salt adsorption capacity of 0.037 mg cm-2 among carbon microfibers. Moreover, monolithic PCF-CNTs with increased active sites and good structural integrity by in-situ growth of CNTs are further fabricated to enhance the desalination performance (0.051 mg cm-2). This work demonstrates the great potential of CF in constructing high-efficient and robust monolithic electrode for CDI.

materials science, multidisciplinary
Composition Design of Block Copolymers for Porous Carbon Fibers

Joel Marcos Serrano,Tianyu Liu,Assad U. Khan,Brandon Botset,Benjamin J. Stovall,Zhen Xu,Dong Guo,Ke Cao,Xi Hao,Shengfeng Cheng,Guoliang Liu

DOI: https://doi.org/10.1021/acs.chemmater.9b02918

IF: 10.508

2019-01-01

Chemistry of Materials

Abstract:Block copolymer-based porous carbon fibers (PCFs) exhibit hierarchical porous structures, high surface areas, and exceptional electrochemical properties. However, the design of block copolymers for PCFs remains a challenge in advancing this type of fibrous material for energy storage applications. Herein, we have systematically synthesized a series of poly(methyl methacrylate-block-acrylonitrile) (PMMA-b-PAN) with well-controlled molecular weights and compositions to study the physical and electrochemical properties of PCFs. PCFs are synthesized via electrospinning, self-assembly, oxidation, and pyrolysis with no additives or chemical activation. By adjusting the molecular weights of polyacrylonitrile (PAN) and poly(methyl methacrylate) blocks, we have achieved tunable mesopore sizes ranging from 10.9 to 18.6 nm and specific capacitances varied from 144 to 345 F g (-1) at 10 mV s(-1). Interestingly, regardless of the volume fraction of PAN, all the block copolymers produce hierarchical porous structures because of the self-assembly and cross-linking of PAN. Block copolymers with a PAN volume fraction of near 50% show the highest surface areas and gravimetric capacitances. The PCFs represent a new platform material with tunable specific surface areas, pore sizes, and electrochemical properties. This work has an immediate impact on designing block copolymers to create PCFs for applications in energy conversion and storage.
ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Xiangke Cui,Zhigao Zhu,Minjie Song,Min Li,Junwen Qi,Yujun Zhou,Yue Yang,Jiansheng Li

DOI: https://doi.org/10.1016/j.carbon.2023.118761

IF: 10.9

2023-12-23

Carbon

Abstract:Highly porous carbon materials with abundant active adsorption sites are desirable for capacitive deionization (CDI). However, their limited salt adsorption capacity, slow desalination rate, and sensitivity to salt concentrations hinder practical applications in low salinity water treatment. In this study, we successfully synthesized a hierarchically porous carbon nanofiber electrode infused with ZnFe 2 O 4 prepared by electrospinning the Fe III -MOF-5/benzoxazine/polyacrylonitrile (Fe III -MOF-5/BA-a/PAN) system, followed by high-temperature curing, KOH activation, and carbonization processes. The activated electrode material exhibited remarkable characteristics, including an exceptionally high specific surface area of 2506.73 m 2 g −1 and significantly enhanced mesoporosity. Results demonstrated pseudo-capacitive behavior with a specific capacitance of 149.3 F g −1 and excellent electrochemical cycling stability. Notably, the electrode showed significant adsorption capacities in a 1000 mg L −1 NaCl solution at applied potentials of 1.2 and 1.6 V, with values of 74.27 and 88.95 mg g −1 , respectively. The adsorption process followed both the Freundlich isotherm and the pseudo-second-order kinetic models. These findings highlight the promising potential of the ZnFe 2 O 4 -infused porous carbon nanofiber electrode for efficient desalination and ion removal applications.

materials science, multidisciplinary,chemistry, physical
Rational design and fabrication of graphene/carbon nanotubes hybrid sponge for high-performance capacitive deionization

Xingtao Xu,Yong Liu,Ting Lu,Zhuo Sun,Daniel H. C. Chua,Likun Pan

DOI: https://doi.org/10.1039/c5ta01889g

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A graphene/carbon nanotubes sponge was fabricated by a freeze-drying and annealing method for capacitive deionization with an ultrahigh electrosorption capacity.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Zhen Wang,Ming Gao,Jie Peng,Luwei Miao,Wenqing Chen,Tianqi Ao

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124596

IF: 8.2

2023-04-29

International Journal of Biological Macromolecules

Abstract:Capacitive deionization (CDI) using porous materials offers a sustainable solution for providing affordable freshwater, but the low salt adsorption rate of benchmark carbon materials significantly limit the practical implementation. Herein, we utilized carboxymethyl cellulose sodium (CMC) as the carbon skeleton to produce a composite carbon aerogel loaded with ZIF-8 (ZIF-8/CMC-CA). The presence of ZIF-8 nanoparticles improved the pore structure of the material and provides a certain pseudo capacitance by introducing N. Compared with ZIF-8 derived carbons (ZIF-8-C), the CMC provided a good three-dimensional structure for the dispersion of ZIF-8 nanoparticles, reduced the agglomeration of particles. Furthermore, numerous carboxyl and hydroxyl groups on CMC enhanced the hydrophilicity of materials. Due to the interconnected structure, ZIF-8/CMC-CA exhibited excellent conductivity, a high specific surface area, and offered suitable channels for the rapid entry and exit of ions. In a three-electrode system, the total specific capacitance of the ZIF-8/CMC-CA electrode was 357.14 F g −1 . The adsorption rate of ZIF-8/CMC-CA was 2.02 mg g −1 min −1 in a 500 mg L −1 NaCl solution. This study may provide new insight for modifying and fabricating electrode materials for practical CDI applications.

polymer science,biochemistry & molecular biology,chemistry, applied
Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Wei Zhang,Can Jin,Zhenyu Shi,Liang Zhu,Lin Chen,Yunlong Liu,Hao Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2021.133113

IF: 8.8

2022-03-01

Chemosphere

Abstract:Recently, capacitive deionization (CDI) has attracted considerable interest as a potential desalination technique for seawater. It is thus desirable to develop low-cost, sustainable, and efficient electrode materials for desalination. In this study, the polyporphyrin was prepared by a one-pot reaction from biobased furan derivative, followed by activation to manufacture nitrogen-doped polyporphyrin derived porous carbons (NPPCs) for efficient capacitive deionization. In the presence of KOH as a pore activator, NPPCs exhibited cross-linked interconnected nanosphere chain-like structures inherited from the polyporphyrin backbone with coexisting mesopores and micropores, leading to extremely high specific surface area (2979.3 m2 g-1) and large pore volume (2.22 cm3 g-1). The electrochemical measurements revealed good conductivity, outstanding stability, and extraordinary specific capacitance (328.7 F g-1) of NPPCs, which can be ascribed to rich nitrogen content (8.0 at%) and high Pyrrolic nitrogen ratio. Due to their superior hierarchical porous structure and excellent electrochemical performance, the NPPC-800 electrodes presented a high salt adsorption capacity (SAC) of 35.7 mg g-1 and outstanding cycling stability in 10 mM NaCl solution at 1.2 V during the desalination tests. This work demonstrates the utilization of biobased porous carbon material will pave a prospective way in sustainable and potential applications for CDI technique.

environmental sciences
Facial synthesis of FeOOH array-anchored carbon fiber as flow-through chloride-capturing electrode for ultrafast and super-stable capacitive deionization

Ziping Wang,Zizhen Liu,Lu Zhang,Zixin Guo,Genzhe Shen,Chenyi Xiao,Qiang Li,Ge Yang,Yong Liu,Xun Yuan

DOI: https://doi.org/10.1016/j.desal.2024.117302

IF: 11.211

2024-01-09

Desalination

Abstract:Faradic-based capacitive deionization (FDI) has been recognized as one of the most promising technologies to solve the freshwater crisis, yet was plagued by two most serious issues, i.e., slow desalination kinetics and poor cyclic stability. Herein, an ultrafast and super-stable FDI system is successfully developed based on the employment of a pseudocapacitive material as flow-through chloride-capturing electrode. While the pseudocapacitive material, anchoring FeOOH arrays on the surface of commercial carbon fiber cloth (CF@FeOOH) ensures high desalination durability by preventing possible FeOOH aggregation through the carbon fiber framework, the unique flow-through electrode enables fast mass transfer by channeling the feed stream inside its microchannels. Consequently, the FDI system equipped with flow-through CF@FeOOH electrodes displays an excellent desalination rate of 0.48 mg g −1 s −1 with ultra-robust cyclic stability (no reduction after 60 cycles and only 14.9 % capacity reduction after 150 cycles), while maintaining its high desalination capacity of 52.04 mg g −1 , exemplifying the critical importance of both delicate material design and rational cell architecture.

engineering, chemical,water resources
Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization

Ming Gao,Jiaxin Li,Yuan Wang,Wencui Liang,Zhiqian Yang,Yi Chen,Wenyang Deng,Zhen Wang,Tianqi Ao,Wenqing Chen

DOI: https://doi.org/10.1016/j.desal.2022.116360

IF: 11.211

2023-01-08

Desalination

Abstract:Abundant endeavors have been undertaken to explore high-quality and inexpensive materials for capacitive deionization desalination. However, one major problem is the sluggish adsorption rate and inferior adsorption performance of these materials in practical applications. Herein, nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods grown on electrospinning carbon nanofibers (denoted Fe 2 O 3 @CNFs) were rationally designed and synthesized for high-efficiency capacitive deionization. Such composition and distinctive hierarchical porous structure prevent agglomeration of Fe 2 O 3 nanorods, boosting the ionic/electronic transport through the synergistic effect between the Fe 2 O 3 nanorods and N-doped carbon nanofibers. When employed as a cathode for capacitive deionization without adding any polymeric binder or conductive additives, this material exhibits a high adsorption capacity of 114.97 mg/g and a rapid salt adsorption rate (7.79 mg/g min). Moreover, the sodium storage mechanism was revealed through ex situ XRD, EDX mapping and ex situ XPS. Density functional theory (DFT) calculations reveal that the electrons are redistributed at the heterojunction interface, refining the electrochemical activity. This work is anticipated to afford an innovative path for the development of porous transition metal oxide-based fibers with outstanding effectiveness and stability toward environmental research of high-performance capacitive deionization.

engineering, chemical,water resources
Electrospun Ultrafine Carbon Fiber Webs for Electrochemical Capacitive Desalination

Ming Wang,Zheng-Hong Huang,Lei Wang,Ming-Xi Wang,Feiyu Kang,Haoqing Hou

DOI: https://doi.org/10.1039/c0nj00407c

IF: 3.3

2010-01-01

New Journal of Chemistry

Abstract:Ultrafine carbon fiber webs were prepared from oxidatively stabilized electrospun poly(acrylonitrile) fibers, followed by carbonization or by further activation with steam. Capacitive de-ionization was evaluated in the batch mode. It was found that the webs exhibited considerable electrical adsorption, which was enhanced by activation with a faster electrosorption rate and a higher electrosorption capacity.
Great truths are always simple: Preoxidation-tuned cellulose-derived carbon fibers achieving ultrahigh areal desalination capacity in flow-through capacitive deionization

Chunjie Zhang,Dong Wang,Yao Qiu,Qiang Zhang,Zhiyuan Liu,Yanan Liu,Jin Hu,Guangwu Wen

DOI: https://doi.org/10.1016/j.cej.2023.144526

IF: 15.1

2023-07-21

Chemical Engineering Journal

Abstract:Constructing thick electrodes with both high strength and porous characteristics is challenging but critical to improve the desalination performance of flow-through capacitive deionization (FTCDI). Different from the most reported electrodes composed of carbon nanomaterials, micron-sized carbon fibers are more advantageous due to the innate excellent mechanical stability and macroscopic porous fibrous structure. Herein, we reported the preoxidation-tuned cellulose-derived carbon fibers (POCF) with improved specific surface area, pore volume, hydrophilicity, and carbon defect degree by precisely-controlled preoxidation process, resulting in enhanced electrochemical activity and sites. Further studies of the cellulose pyrolysis mechanism disclose that preoxidation temperature has a crucial influence on the carbon yield and electrical conductivity, which significantly affect the desalination capacity of the integrated (current collector-free and binder-free) POCF electrode. Compared with the conventional activated carbon-coated electrode and commercial activated carbon fibers cloth electrode, the POCF electrode exhibits outstanding desalination performance due to the synergistic effect of high active materials loading and good electrical conductivity. Most importantly, the desalination capacity of POCF electrode realizes the linear growth with 4-fold enhancement by increasing the thickness and remains almost unchanged even up to a large size of 120 cm 2 , indicating unlimited ion diffusion and excellent scalability. Impressively, an ultrahigh areal salt ion adsorption capacity of 0.76 mg cm −2 is achieved for the 2.4 mm thick POCF electrode. Our work successfully validates the feasibility and superiority of the POCF in constructing thick electrodes for achieving high areal desalination performance.

engineering, chemical, environmental
Electrospun Carbon Nanofiber Networks from Phenolic Resin for Capacitive Deionization

Yingzhi Chen,Mengbin Yue,Zheng-Hong Huang,Feiyu Kang

DOI: https://doi.org/10.1016/j.cej.2014.04.099

IF: 15.1

2014-01-01

Chemical Engineering Journal

Abstract:The performance of capacitive deionization (CDI) mainly relies on the ion electrosorption capability. Here, we introduce a kind of free-standing, highly porous carbon nanofiber (CNF) networks with enhanced desalination capacity. The CNF networks were easily prepared by electrospinning of phenolic resin (PhR) precursor followed by one-step carbonization step. The as-obtained PhR-based CNF networks exhibited characteristics of high flexibility, conductivity and specific surface area (SSA) along with favorable porosity, and hence demonstrated enhanced desalination capacity. When used as CDI electrodes, the PhR-based CNF networks have demonstrated a desalination capacity of 50.1mgg−1 toward 2000mgL−1 brackish water at 1.2V, much better than most reported data thus far. More importantly, easy recovery and good reproducibility could be obtained for such electrodes. Therefore, construction of PhR-based CNF network electrodes offers remarkable opportunities for improving CDI capabilities and reliability given its simplicity, easy operation, and high performance.
Laser-induced nitrogen and phosphorus-doped spongy carbon with graphene wings derived from lignin for significantly enhanced capacitance deionization performance

Xin Zhang,Haicun Yang,Shi Liu,Jinchun Li

DOI: https://doi.org/10.1016/j.seppur.2024.128072

IF: 8.6

2024-05-26

Separation and Purification Technology

Abstract:Efficient capacitive deionization (CDI) technology puts forward higher requirements for electrode materials. However, the traditional process of preparing porous carbon (PC) electrodes by alkaline chemical activation is polluting and energy-consuming. In this work, the N/P co-doped biocarbon material (H-AL/APP) was prepared by using alkali lignin (AL) and ammonium polyphosphate (APP) as carbon precursors based on laser-induced carbonization and hydrothermal activation technology. The as-prepared carbon material shows a three-dimensional (3D) structure with a hierarchical porous structure, large specific surface area of 405.98 m 2 /g (SSA), excellent pore volume, and outstanding mesoporosity. Compared with commercial YP80 activated carbon, The H-AL/APP electrode exhibits a higher specific capacitance of 210F/g with excellent rate performance and cycle stability. When assembled for desalination, H-AL/APP shows the highest removal rate of 23 mg/g/min with an outstanding desalination capacity of 34.6 mg/g than those of YP80 activated carbon. Furthermore, reasonable cycle stability and reproducibility highlight their promising application prospects. In summary, this work provides a green, efficient, and economical method for preparing high-performance heteroatom-doped PCs for efficient CDI desalination.

engineering, chemical
Superior capacitive storage behavior of porous carbon electrode with high mass loading

Guanzhong Wang,Debin Ji,Hongjun Wu,Xinlong Ma

DOI: https://doi.org/10.1016/j.apt.2021.10.013

IF: 4.969

2021-12-01

Advanced Powder Technology

Abstract:Porous carbon (PC) derived from the petroleum pitch via the template-guidance coupled with activation methodology, possesses hierarchical pore structure in view of micropore and mesopore. As the electrode material for electrochemical double-layer capacitor, PC electrode not only possesses the good adaptability to aqueous and organic electrolytes, but also delivers the superior capacitive behavior with respect to capacitance and rate capability over those of counterparts (activation-derived carbon and commercial activated carbon). Furthermore, relatively high values of gravimetric and areal capacitances (247F g−1 and 2470 mF cm−2) can be guaranteed simultaneously for PC electrode even at the commercial-level mass loading of 10 mg cm−2, demonstrating the good compatibility to gravimetric and areal capacitances. The satisfactory capacitive storage behavior of PC is ascribed to the synergistic effect of hierarchical pore structure and extraordinary structural integrity. Besides, this work also presents a high value-added utilization strategy to prepare the high-performance porous carbon-based electrode material for capacitive energy storage.

engineering, chemical
Boosting supercapacitor and capacitive deionization performance of hierarchically porous carbon by polar surface and structural engineering

Silu Huo,Yubo Zhao,Mingzhu Zong,Bolong Liang,Xueli Zhang,Izhar Ullah Khan,Xue Song,Kexun Li

DOI: https://doi.org/10.1039/c9ta12170f

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Heteroatom doped hierarchically porous carbon materials are considered as promising candidates for high performance capacitive deionization and supercapacitor applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Preparation of nitrogen-doped hierarchical porous carbon electrodes for high performance capacitive deionization

Shi Liu,Qiuze Wang,Bingjian Li,Yinjie Zhou,Tianyang Gong,Jinchun Li

DOI: https://doi.org/10.1007/s11581-023-05051-6

IF: 2.961

2023-06-01

Ionics

Abstract:In this work, metal–organic framework (MOF)/ reduced graphene oxide (RG)/ carbon nanotube (CNT) composite was synthesized by solvent method. Zeoliticimidazolate framework-8 (ZIF-8) nanoparticles were linked by CNT and attached to graphene lamelayer. After carbonization and acid etching, the obtained N-doped derived hierarchically porous carbon material (NPC/CNT-RG) possessed three-dimensional (3D) conductive network structure, which was not only conductive to promote ions rapidly diffusion, but also provide more active sites and shot the ions transport path. The NPC/CNT-RG electrode displayed a high specific capacitance of 412.5 F/g. Moreover, NPC/CNT-RG electrode exhibited an excellent desalination performance in NaCl, MgCl2 and CaCl2 (initial concentration of 500 mg/L and the voltage set at 1.2 V) solutions, the salt adsorption capacity (SAC) were 28.99 mg/g, 33.01 mg/g and 34.84 mg/g, respectively. This derived carbon composite material as electrode might be beneficial to improve the desalination performance in CDI.

chemistry, physical,physics, condensed matter,electrochemistry
Block copolymer derived uniform mesopores enable ultrafast electron and ion transport at high mass loadings

Tianyu Liu,Zhengping Zhou,Yichen Guo,Dong Guo,Guoliang Liu

DOI: https://doi.org/10.1038/s41467-019-08644-w

IF: 16.6

2019-02-08

Nature Communications

Abstract:High mass loading and fast charge transport are two crucial but often mutually exclusive characteristics of pseudocapacitors. On conventional carbon supports, high mass loadings inevitably lead to sluggish electron conduction and ion diffusion due to thick pseudocapacitive layers and clogged pores. Here we present a design principle of carbon supports, utilizing self-assembly and microphase-separation of block copolymers. We synthesize porous carbon fibers (PCFs) with uniform mesopores of 11.7 nm, which are partially filled with MnO2 of <2 nm in thickness. The uniform mesopores and ultrathin MnO2 enable fast electron/ion transport comparable to electrical-double-layer-capacitive carbons. At mass loadings approaching 7 mg cm−2, the gravimetric and areal capacitances of MnO2 (~50% of total mass) reach 1148 F g−1 and 3141 mF cm−2, respectively. Our MnO2-coated PCFs outperform other MnO2-based electrodes at similar loadings, highlighting the great promise of block copolymers for designing PCF supports for electrochemical applications.

multidisciplinary sciences
Synthesis and Characterization of Activated Carbon Co-Mixed Electrospun Titanium Oxide Nanofibers as Flow Electrode in Capacitive Deionization

Gbenro Folaranmi,Myriam Tauk,Mikhael Bechelany,Philippe Sistat,Marc Cretin,Francois Zaviska

DOI: https://doi.org/10.3390/ma14226891

IF: 3.4

2021-11-15

Materials

Abstract:Flow capacitive deionization is a water desalination technique that uses liquid carbon-based electrodes to recover fresh water from brackish or seawater. This is a potential second-generation water desalination process, however it is limited by parameters such as feed electrode conductivity, interfacial resistance, viscosity, and so on. In this study, titanium oxide nanofibers (TiO2NF) were manufactured using an electrospinning process and then blended with commercial activated carbon (AC) to create a well distributed flow electrode in this study. Field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray (EDX) were used to characterize the morphology, crystal structure, and chemical moieties of the as-synthesized composites. Notably, the flow electrode containing 1 wt.% TiO2NF (ACTiO2NF 1 wt.%) had the highest capacitance and the best salt removal rate (0.033 mg/min·cm2) of all the composites. The improvement in cell performance at this ratio indicates that the nanofibers are uniformly distributed over the electrode’s surface, preventing electrode passivation, and nanofiber agglomeration, which could impede ion flow to the electrode’s pores. This research suggests that the physical mixture could be used as a flow electrode in capacitive deionization.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

Exceptional capacitive deionization rate and capacity by block copolymer–based porous carbon fibers

Capacitive Organic Dye Removal by Block Copolymer Based Porous Carbon Fibers

Amino acids functionalized vascular-like carbon fibers for efficient capacitive deionization

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Composition Design of Block Copolymers for Porous Carbon Fibers

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Rational design and fabrication of graphene/carbon nanotubes hybrid sponge for high-performance capacitive deionization

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Facial synthesis of FeOOH array-anchored carbon fiber as flow-through chloride-capturing electrode for ultrafast and super-stable capacitive deionization

Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization

Electrospun Ultrafine Carbon Fiber Webs for Electrochemical Capacitive Desalination

Great truths are always simple: Preoxidation-tuned cellulose-derived carbon fibers achieving ultrahigh areal desalination capacity in flow-through capacitive deionization

Electrospun Carbon Nanofiber Networks from Phenolic Resin for Capacitive Deionization

Laser-induced nitrogen and phosphorus-doped spongy carbon with graphene wings derived from lignin for significantly enhanced capacitance deionization performance

Superior capacitive storage behavior of porous carbon electrode with high mass loading

Boosting supercapacitor and capacitive deionization performance of hierarchically porous carbon by polar surface and structural engineering

Preparation of nitrogen-doped hierarchical porous carbon electrodes for high performance capacitive deionization

Block copolymer derived uniform mesopores enable ultrafast electron and ion transport at high mass loadings

Synthesis and Characterization of Activated Carbon Co-Mixed Electrospun Titanium Oxide Nanofibers as Flow Electrode in Capacitive Deionization