Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Modeling the Carbonitriding of Steels

Mathematical Modelling and Computer Simulation of Nitriding

Modelling of Blast Furnace Ironmaking Process Based on Digital Twin

Transient Analysis of Thermal Treatment Processes Carburizing and Nitriding of Steel Components by Numerical Modeling and Simulation

Experimental Study and Computer Simulation on Multicomponent Diffusion in Multiphase Dispersions During Solid Carburizing of HP40Nb and KHR45A Alloys

Gaseous carbonitriding of high carbon chromium bearing steel: Correlation between composition, microstructure and stability

Carbonitriding: kinetic modeling of ammonia and acetylene decomposition at high temperature and low pressure

Modeling of the HiPco process for carbon nanotube production. I. Chemical kinetics

Evolution of residual stress in the diffusion zone of a model Fe-Cr-C alloy during nitriding*

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO2-induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Microstructure–Wear Resistance Relationship of Nitrogen-Containing High-Speed Tool Steel, AISIM41: Non-equilibrium Solidification

In-situ Measurement and Numerical Simulation of Nitriding Kinetics of Grain-Oriented Silicon Steel

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO 2 -induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

3D Model of Carbon Diffusion during Diffusional Phase Transformations

Formation of Chromium Nitride Coatings on Carbon Steels by Pack Cementation Process

A Novel Single-Step Surface-Treatment Process for Forming Cr-Nitride Coatings on Steels

Modeling of the continuous casting of steel—past, present, and future

Modeling of the case depth and surface hardness of steel during ion nitriding

Thermodynamic and kinetic analysis of formation of compound layer during gas nitriding of AISI1018 carbon steel

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

An Approach for Modelling Carbon Homogenization Processes of Steel in Micro-Scale