Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Thermodynamic and kinetic analysis of formation of compound layer during gas nitriding of AISI1018 carbon steel

Kinetics of Iron Nitride Layer Growth during the Nitriding of AISI 1085 Non-Alloy Steel and AISI 52100 Alloy Steel

Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel

Nitriding layer characteristics of modified AISI422 martensitic stainless steel in tempered state

Gaseous carbonitriding of high carbon chromium bearing steel: Correlation between composition, microstructure and stability

Numerical Prediction Of Compound Layer Growth Of Steel En40b During Plasma Nitriding

The Influence of Selected Process Parameters on the Efficiency of the Process of Gas Nitriding of AISI 1085 Steel

A Study on Formation and Growth Mechanism of Nitride Layers During Plasma Nitriding Process of Plastic Injection Mold Steel

Theoretical Calculations and Experimental Study of the Nitrided Layer of 1Cr17Ni2 Steel

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Increasing surface hardness of austenitic stainless steels by pack nitriding process

Effect of nitrided-layer microstructure control on wear property of 42CrMo steel

Study on Gas Nitriding Process of GH4169 Alloy

Characterization of Vein-Like Structures Formed in Nitrided Layers During Plasma Nitriding of 8cr4mo4v Steel

Improved Nitrogen Transport in Surface Nanocrystallized Low-Carbon Steels During Gaseous Nitridation

Insights into plasma nitriding behaviour of M50NiL steel with different initial microstructures

Effect of Pre-Existing VC Carbides on Nitriding and Wear Behavior of Hot-Work Die Steel

Preparation and characterization of ultra-refined expanded martensite α′N

Mechanical and Microstructural Characterization of AISI 316L Stainless Steel Superficially Modified by Solid Nitriding Technique

Characteristics of the Nitrided Layer Formed on AISI 304 Austenitic Stainless Steel by High Temperature Nitriding Assisted Hollow Cathode Discharge