Abstract:In this paper, the Ti-6Al-4V(TC4) alloy specimens pre-coated with Ti-Cu-Al multilayer films were plasma nitrided at different temperatures (673K-823K), and their microstructure and mechanical properties were studied. Surface hardness changes induced by pre-coating combined with plasma nitriding were also analyzed and correlated with microstructural features and elemental distribution. Ti-Cu-Al multilayer films with clear interfaces on deformed TC4 alloy were fabricated. The multilayer structure survived after nitriding, and a thick gradient nitrided layer with a gradient distribution of N elements was formed. The bonded nitride on the surface provides high hardness, reaching 948HV at 723K. In addition, the nitride TC4 alloy's wear resistance exhibits a significant improvement compared with the untreated specimen, especially at 823K, the mass wear rate decreased by more than 80%. It is mainly attributed to the N/metal element gradient distribution of the thick nitride layer. The nitriding behavior of α-Ti/Cu/Al was investigated by first-principles calculations. According to the thermodynamic calculation results, N atoms preferentially occupy the octahedral interstitial sites of α-Ti and the tetrahedral interstitial sites of Al. It is worth noting that N atoms have poor thermodynamic stability in Cu, which is consistent with the experimental results. The calculated elastic properties agree with the experimental cross-sectional hardness results, showing a smooth decreasing trend of the complex modulus and hardness on the micrometer length scale and explaining the improved structure performance. These results may provide crucial inspirations for future experimental work preparing high-performance nitrided layers.

Investigation of nitrogen ionization state and its effect on the nitride layer during fiber laser gas nitriding of Ti-6Al-4V alloy

Laser Surface Nitriding of Ti–6Al–4V Alloy in Nitrogen–Argon Atmospheres

Use of Nitrogen Gas in High-Speed Milling of Ti-6Al-4V

Investigation on Surface Nitridation of Titanium by Pulsed Laser

Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: Experiments and first-principles calculations

Comparison of open-atmosphere nitriding on various metal surfaces triggered by a focused pulsed laser irradiation

Surface nitridation of titanium using pulse laser gas alloying method and its microstructure analysis with XRD and SEM

Investigation about the effect of trace oxygen on the plasma nitriding of titanium foil

Evolution of chemical, structural, and mechanical properties of titanium nitride thin films deposited under different nitrogen partial pressure

Laser nitriding of titanium surface and TOFMS (time of fight mass spectra) analysis

Microstructure evolution and vacuum tribological properties of surface nitriding layer on a TiZrAlV alloy fabricated by laser nitriding

Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding

Microstructure evolution and mass transfer behavior during multi-pass laser surface nitriding process on titanium alloy

In-situ synthesis of nitrides and oxides through controlling reactive gas atmosphere during laser-powder bed fusion of Fe-12Cr-6Al

Low-temperature plasma nitriding at 500°C on surface-nanocrystalline Ti–4Al–2V alloy

Microstructure and Hardness of the Laser Surface Treated Titanium

Investigation on Microstucutres and properties of ion nitriding layer of Al 0.5 CoCrFeNiTi 0.25 HEAs cladding coating

Characterization and electrochemical behavior of a multilayer-structured Ti–N layer produced by plasma nitriding of electron beam melting TC4 alloy in Hank's solution

Research on Technology of Laser Gas Nitriding on TA2 Pure Titanium Surface

Effect of Gas Nitriding on 316 L Stainless Steel Lattice Manufactured Via Selective Laser Melting

Effects of titanium nitride coatings on surface and corrosion characteristics of Ni-Ti alloy