Abstract:In this work, various calorimetric and analytical techniques were implemented to identify reaction pathways and safety issues associated with the 2-octanol to 2-octanone two liquid phase catalytic reaction oxidative using aqueous hydrogen peroxide as oxidant, sodium tungstate (Na2WO4) as catalyst and methyltri-n-octylammonium hydrogen sulfate [CH3(n-C8H17)(3)N+HSO4-] as phase transfer catalyst. Differential scanning calorimetry (DSC) was employed to measure the temperature and heat flux of the reactant mixtures under dynamic scanning. Phi-TEC II adiabatic calorimeter was used to track temperature and pressure under worst runaway scenario. Isothermal reaction calorimeter (RC1e) was used to assess conditions relevant to normal process operations. Gas chromatography-mass spectrometry (GC-MS) was utilized to analyze final products of all measurements qualitatively and quantitatively. Data from both DSC and Phi-TEC II show that two highly exothermic reactions were detected with "onset" temperature at similar to 50 and similar to 220 degrees C, respectively. In all cases, only 2-octanol and 2-octanone were the identifiable compounds via GC-MS. 2-Octanol conversion was in the range of 15-50% and it reveals a linear correlation with overall heat generation. Data obtained verify that both exothermic peaks result from alcohol oxidation, thus indicating that in the conditions of the reaction and with the employed catalysts, hydrogen peroxide did not fully decompose at lower temperatures. Non-condensable gas generation measurements validated this argument. Based on those results, possible macroscopic reaction pathway was proposed. Furthermore, pressure and temperature profiles by PHI-TEC II indicated a potential transition to a homogeneous liquid phase at higher temperatures. The RC1e results verified that 2-octanol conversion was higher at higher stirring rates, while evaporative cooling of solvents tempered the reaction by removing the heat generated, thus improving safety. These findings can be further used to propose safer operating measures for design and scale-up of this reaction process to avert a potential runaway and to probe in the reaction pathways so as to increase inherently safer conditions for its performance.

Investigating Semibatch Oxidation Reaction of Dimethyl Sulfoxide with Hydrogen Peroxide: Thermal Analysis and Process Optimization

Uncatalyzed Oxidation of Cyclohexane in the Microchannels

Process optimization and thermal hazard analysis of the preparation of diphenyl sulfoxide using hydrogen peroxide as oxidant

Process Hazard Evaluation for Catalytic Oxidation of 2-Octanol with Hydrogen Peroxide Using Calorimetry Techniques

Continuous-Flow Synthesis of Methyl Sulfone with Microchannel Reactors: A Safer and Efficient Production Strategy

Research on the crystallization clogging during reaction process in the microchannel continuous flow process

Potential Explosion Hazards Associated with the Autocatalytic Thermal Decomposition of Dimethyl Sulfoxide and Its Mixtures

Highly Selective Oxidation of Methanol to Dimethoxymethane over So42-/V2o5-Zro2

Efficient Continuous-Flow Synthesis of Diacyl Peroxide in a Microreactor and the Post-Processing of Its Effluent

Methyl Phenyl Sulfoxide (PMSO) As a Quenching Agent for High-Valent Metal-Oxo Species in Peroxymonosulfate Based Processes Should Be Reconsidered

Experimental investigation and simulation of gas–liquid–liquid reactive extraction process for the production of hydrogen peroxide

Investigating the evolution of reactive species in the CuO-mediated peroxymonosulfate activation process

Integrated solvent-process design methodology based on COSMO-SAC and quantum mechanics for TMQ (2,2,4-trimethyl-1,2-H-dihydroquinoline) production

Fabrication of Tungstate Metal Foams As Efficient Catalysts for Dimethyl Sulfoxide Oxidation in a Microreactor

Process Safety Evaluation and Reaction Mechanism of Two Step Synthesis of Tert-Butyl Hydrogen Peroxide

Investigating the Inherent Safety Designs of Typical Exothermic Reaction Processes

Inherently safer design and multi-objective optimization of extractive distillation process via computer-aided molecular design, thermal stability analysis, and multi-objective genetic algorithm

Inherently safer design for synthesis of 3‐methylpyridine‐N‐oxide

Determination and discussion of apparent reaction kinetics of liquid diacyl peroxide synthesis in a microreactor

Preparation of CuWO4 Foam and Its Use As a Heterogeneous Catalyst for Dimethyl Sulfoxide Oxidation in a Scale-Up Microreactor

The Influence Mechanism of Solvent on the Hydrogenation of Dimethyl Oxalate