Abstract:Aiming to optimize the product distribution of the Cu–Al catalytic system in the oxalate hydrogenation reaction as a way to optimize and improve the product structure of the coal-to-ethylene glycol process (Coal-Oxalate-EG), the researchers have investigated the two anchoring sites for anchoring the Cu component that is available in the Al2O3 support. The results show that the catalyst xSB synthesized from Al2O3 enriched with surface –OH functional groups is superior to the catalyst xSol synthesized from Al2O3 enriched with Al3+Penta sites for oxalate conversion, whereas xSol outperforms the xSB catalyst for the formation of alcohol-ether ester chemicals. Using diethyl oxalate (DEO) as feedstock, the reaction temperature of the 1Sol catalyst (235 °C) was higher than that of the 1SB catalyst (205 °C) for the conversion of the same amount of DEO at the same Cu loading. Meanwhile, the chemical selectivity of alcohol ether esters was higher for the 1Sol catalyst (~ 35%) than for the 1SB (~ 20%). Detailed characterization (XRD, NH3-TPD, XPS, in-situ FTIR, TEM, etc.) shows that the Al3+Penta sites are mainly present in the bulk phase of Al2O3, and the number of Al3+Penta sites present on the surface of the carriers is only sufficient to maintain the low content of Cu species in a highly dispersed state. A certain number of Al–OH is still required for the anchoring of the Cu species to the Al2O3 support surface. Therefore, hydroxyl-rich SB carriers are more favorable for the high dispersion of Cu species. Meanwhile, the stronger LAS distributed on the surface of the hydroxyl-rich SB carrier will lead to the decomposition or dehydration of the raw materials and intermediates during the reaction process, resulting in the formation of lower molecular weight products, which is unfavorable to the formation of the alcohol-ether ester products. Based on the detailed reaction data and characterization, a more complete product formation pathway of oxalate in the Cu–Al catalytic system is given, which provides a certain theoretical basis for the development of new coal-based chemical pathways.Graphical Abstract

The Influence Mechanism of Solvent on the Hydrogenation of Dimethyl Oxalate

Strong Cu/ZnO Interfacial Interaction Induced by ZrO2 Promoter Suppressing the Ethanol Formation in Industrial Methanol Synthesis

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Effect of Surface Hydroxyl Content of Support on the Activity of Cu/ZSM-5 Catalyst for Low-Temperature Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Ethylene glycol and ethanol synthesis from dimethyl oxalate hydrogenation on the Cu/ZnO/SiO2 catalysts

Hydrogenation Of Dimethyl Oxalate To Ethylene Glycol Over Cu/Sio2 Catalysts

Role of the Cu dopant in the textural and catalytic features of the Co/ZnO catalyst for dimethyl oxalate selective hydrogenation

Catalytic Performance and Texture of Teos Based Cu/Sio2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Efficient Tuning of Surface Copper Species of Cu/SiO2 Catalyst for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Cu/SiO2 catalysts prepared by different methods for hydrogenolysis of dimethyl oxalate to ethylene glycol

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

Solvent Feedstock Effect: the Insights into the Deactivation Mechanism of Cu/SiO2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol.

Mechanism of Methanol Synthesis from CO2 Hydrogenation over Cu/γ-Al2O3 Interface: Influences of Surface Hydroxylation

Methanol Synthesis from CO2 Hydrogenation on CuO–ZnO–ZrO2 Prepared by Solvothermal Method: the Influence of Solvent on Catalyst Properties and Catalytic Behavior

99/00320 Effect of oxide dispersion in a bifunctional catalyst on the formation of dimethyl ether

Effect of Differences in Anchoring Sites on the Hydrogenation Performance of Diethyl Oxalate in Cu–Al Catalyzed Systems

Cu/SiO2 Catalysts Prepared by the Ammonia-Evaporation Method: Texture, Structure, and Catalytic Performance in Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Enhanced Catalytic Performance for SiO2–TiO2 Binary Oxide Supported Cu-based Catalyst in the Hydrogenation of Dimethyloxalate

Ethanol Synthesis from Dimethyl Oxalate Hydrogenation on Cu/SiO<sub>2</sub> Catalyst

Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol