Abstract:In order to investigate the mechanism of thickness debit effect at different stress levels, creep tests of thin-walled Ni-based superalloys were conducted under three test conditions: 220 MPa, 275 MPa and 330 MPa at 980 degrees C. Results showed that the creep life reduced with the decrease of specimen thickness at 220 MPa and 275 MPa. At 330 MPa, this variation tendency was not so evident. Metallographic observations revealed that the specimen thickness and the external stress level affected the depth of gamma' depleted region and the distribution of voids and cracks of the specimen. Thus, a phase-field model and a crack growth model were used to consider the influence of gamma' depleted region and crack growth on life, respectively. It was found from the phase-field model that the existence of gamma' depleted region led to more considerable plastic strain and equivalent stress in the normal gamma/gamma' phase region than that in the gamma' depleted region. This phenomenon was more evident in the thin specimen at low stress level. At high stress level, the redistribution of the stress field was not so distinct due to the premature plastic deformation in the normal gamma/gamma' phase region. The crack growth models showed a shorter critical value of the crack length and faster crack propagation in the thin specimen. However, the increased external stress levels would decrease the disparity of cracks propagation between the thin and thick samples. Comprehensive consideration of the phase-field method and the crack growth model revealed the thickness debit effect at different stress levels.

Effect of the Withdrawal Rate on the Microstructure and Creep Behavior of the Directionally Solidified Nickel-Based Superalloy

Effect of Withdrawal Rate on the Microstructure and Mechanical Properties of a Novel Monocrystalline CoNi-based Superalloy

Creep Residual Life Prediction of a Nickel-Based Single Crystal Superalloy Based on Microstructure Evolution

Effect of Withdrawal Rate on Microstructure and Mechanical Properties of a Third Generation Nickel Based Single Crystal Superalloy

Effects of Elevated Withdrawal Rate on the Microstructure and Segregation Behavior of A Nickel-Base Single Crystal Superalloy

The Influence of Dwell Time on Low Cycle Fatigue Behavior of Ni-Base Superalloy Ic10

Anisotropic Creep Life Prediction of Nickel-based Single Crystal Based on Dislocation Movement

The Effects of Withdrawal and Melt Overheating Histories on the Microstructure of a Nickel-Based Single Crystal Superalloy

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3

Thickness Debit Effect in Ni-based Single Crystal Superalloys at Different Stress Levels

The effect of microstructure on the creep behavior of a low rhenium-containing single crystal nickel-based superalloy

Influence of withdrawal rate on microstructures of blade shaped directionally solidified DZ125 superalloy

Effect of Withdrawal Rate on the Microstructure and Room Temperature Mechanical Properties of Directionally Solidified NiAl–Cr(Mo)–(Hf, Dy)–4Fe Alloy

Effect of Withdrawal Rate on the Microstructure of Directionally Solidified NiAl–Cr(Mo) Hypereutectic Alloy

Effect of Withdrawal Rate on the Microstructure of Directional Solidified Ni-43Ti-4Al-2Nb-2Hf Single Crystal Alloys

Microstructural Evolution of Directionally Solidified Ni-Based Superalloy Dz125 under High Temperature Gradient

Effects Of Withdrawal Rate On The Microstructure Of Directionally Solidified Gh4720li Superalloys

THE EFFECTS OF WITHDRAWAL AND MELT OVERHEATING HISTORIES ON THE MICROSTRUCTURE OF A NICKED-BASED SINGLE CRYSTAL SUPERALLOY

Effect of Withdrawal Rate on the Microstructure of Directional Solidified Ti-47al-2cr-2nb-0.8b Alloys

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Effect of Withdrawal Rate on Microstructure and Mechanical Properties of a Directionally Solidified NiAl-based Hypoeutectic Alloy Doped with Trace Hf and Ho