Abstract:By means of creep properties measurement, microstructure observation and contrast analysis of dislocation configuration, the creep behavior of a 4.5%Re/3.0%Ru-containing single crystal nickel-based superalloy at elevated temperature is investigated. Results show that the creep life of the alloy at 1040°C/160MPa is measured to be 725h to exhibit a better creep resistance at high temperature. In the primary stage of creep at high temperature, the γ phase in alloy has transformed into the N-type rafted structure along the direction vertical to the stress axis, the deformation mechanism of alloy during steady state creep is dislocations slipping in γ matrix and climbing over the rafted γ phase. In the latter period of creep, the deformation mechanism of alloy is dislocations slipping in γ matrix and shearing into the rafted γ phase. Wherein the dislocations shearing into the γ phase may cross-slip from {111} to {100} planes for forming the K-W locks to restrain the slipping and cross-slipping on {111} plane, which is thought to be the main reason of the alloy having a better creep resistance. As the creep goes on, the alternate slipping of dislocations results in the twisted of the rafted γ phase to promote the initiation and propagation of the cracks along the interfaces of γ/γ phase up to creep fracture, which is thought to be the damage and fracture mechanism of alloy during creep at high temperature. Periodical: Main Theme: Edited by: Jian Ming Gong, Ming-Liang Zhu and Shan Tung Tu Pages: 123-129 DOI: https://doi.org/10.4028/www.scientific.net/KEM.795.123 Citation: G. Q. Zhao et al., "Creep Damage of a Re/Ru-Containing Single Crystal Nickel-Based Superalloy at Elevated Temperature", Key Engineering Materials, Vol. 795, pp. 123-129, 2019 Online since: March 2019 Authors: Keywords: Export: Price: 36,00 € Permissions: Request Permissions Share: * - Corresponding Author [1] Nystrom J D, Pollock T M, Murphy W H, et al. Discontinuous cellular precipitation in a high-refractory nickel-base superalloy[J]. Metallurgical & Materials Transactions A, 1997, 28(12): 2443-2452. DOI: https://doi.org/10.1007/s11661-997-0001-1 [2] Sun X F, Jin T, Zhou Y Z, et al. Research progress of Effects of nickel-base single crystal superalloys heat treatment on composition segregation and enduring properties of single crystal nickel-based superalloy[J]. Materials China, 2012, 31(12): 1-11. [3] Zhao K, Ma Y H, Lou L H, et al. m phase in a nickel base directionally solidified alloy[J]. Materials Transactions, 2005, 46(1): 54-58. DOI: https://doi.org/10.2320/matertrans.46.54 [4] Reed R C, Yeh A C, Tin S, et al. Identification of the partitioning characteristics of ruthenium in single crystal superalloys using atom probe tomography[J]. Scripta Materialia, 2004, 51(4): 327-331. DOI: https://doi.org/10.1016/j.scriptamat.2004.04.019 [5] Yeh A C, Tin S. Effects of Ru on the high-temperature phase stability of Ni-base single-crystal superalloys[J]. Metallurgical & Materials Transactions A, 2006, 37(9): 2621-2631. DOI: https://doi.org/10.1007/bf02586097 [6] Yeh A C, Sato A, Kobayashi T, et al. On the creep and phase stability of advanced Ni-base single crystal superalloys[J]. Materials Science and Engineering, A, 2008, 490(1): 445-451. DOI: https://doi.org/10.1016/j.msea.2008.02.008 [7] Sato A, Harada H, Yokokawa T, et al. The effects of ruthenium on the phase -Abstract Truncated-

The Effect of Withdrawal Rate on Crystal Structure Perfection, Microstructure and Creep Resistance of Single Crystal Castings Made of CMSX-4 Nickel-Based Superalloy

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Effect of the Cooling Rate on the Microstructure of Directionally Solidified Casting (CMSX-4 Ni Superalloy)

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3

The Effect of Strain Rate on the Tensile Deformation Behavior of Single Crystal, Ni-Based Superalloys

An insight into the creep failure mechanism of sliver defect in the second-generation nickel-based single crystal superalloy CMSX-4

Study on Creep Damage of Ni-Based Superalloy Caused by Variable Load Conditions at Elevated Temperatures

Competing Mechanism of Creep Damage and Stress Relaxation in Creep-Fatigue Crack Propagation in Ni-Base Superalloys

Influence of Withdrawal Rate on the Porosity in a Third-Generation Ni-based Single Crystal Superalloy

Deformation Features of a High Mo Nickel-Based Single Crystal Superalloy during Creep at High Temperature

Creep Damage of a Re/Ru-Containing Single Crystal Nickel-Based Superalloy at Elevated Temperature

Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing

Improvement in creep life of a nickel-based single-crystal superalloy via composition homogeneity on the multiscales by magnetic-field-assisted directional solidification

Microstructure evolution, mechanical properties and creep mechanisms of Mg-12Gd-1MM-0.6Zr (wt%) magnesium alloy

The Effect of the Cooling Rates on the Microstructure and High-Temperature Mechanical Properties of a Nickel-Based Single Crystal Superalloy

Multi-Scale Crystal Plasticity Model of Creep Responses in Nickel-Based Superalloys

A study of the morphological effect of an α-Al2O3 layer on the creep life for nickel-based superalloys using microstructure-based geometrical models

Creep Behavior Characterization of Nickel-Based Single-Crystal Superalloy DD6 Thin-Walled Specimens Based on a 3D-DIC Method

Effect of Solidification Rate on Mc-Type Carbide Morphology in Single Crystal Ni-Base Superalloy Am3