Abstract:Abstract There is an increasing need for the use of additive manufacturing (AM) to produce improved critical application engineering components. However, the materials manufactured using AM perform well below their traditionally manufactured counterparts, particularly for creep and fatigue. Research has shown that this difference in performance is due to the complex relationships between AM process parameters which affect the material microstructure and consequently the mechanical performance as well. Therefore, it is necessary to understand the impact of different AM build parameters on the mechanical performance of parts. Machine learning (ML) models are able to find hidden relationships in data using iterative statistical analyses and have the potential to develop process–structure–property–performance relationships for manufacturing processes, including AM. The aim of this work is to apply ML techniques to materials testing data in order to understand the effect of AM process parameters on the creep rate of additively built nickel-based superalloy and to predict the creep rate of the material from these process parameters. In this work, the predictive capabilities of ML and its ability to develop process–structure–property relationships are applied to the creep properties of laser powder bed fused alloy 718. The input data for the ML model included the Laser Powder Bed Fusion (LPBF) build parameters used—build orientation, scan strategy and number of lasers—and geometrical material descriptors which were extracted from optical microscope porosity images using image analysis techniques. The ML model was used to predict the minimum creep rate of the Laser Powder Bed Fused alloy 718 samples, which had been creep tested at $$650\,^\circ $$ 650 ∘ C and 600 MPa. The ML model was also used to identify the most relevant material descriptors affecting the minimum creep rate of the material (determined by using an ensemble feature importance framework). The creep rate was accurately predicted with a percentage error of $$1.40\%$$ 1.40 % in the best case. The most important material descriptors were found to be part density, number of pores, build orientation and scan strategy. These findings show the applicability and potential of using ML to determine and predict the mechanical properties of materials fabricated via different manufacturing processes, and to find process–structure–property relationships in AM. This increases the readiness of AM for use in critical applications.

Creep Characterization of Inconel 718 Lattice Metamaterials Manufactured by Laser Powder Bed Fusion

Small punch creep test reveals the differences of high-temperature creep behaviours for laser powder bed fusion and Rolled Inconel 718 alloys

Creep-fatigue Properties and Deformation Mechanism of 316L Steel Fabricated by Laser Powder Bed Fusion (PBF-LB/M)

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room‐ and High Temperature

Influence of Prior Low Cycle Fatigue on Microstructure Evolution and Subsequent Creep Behavior

Microstructure, Mechanical Property and Heat Treatment Schedule of the Inconel 718 Manufactured by Low and High Power Laser Powder Bed Fusion

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Experimental characterization of flat indentation creep behaviour of Inconel 617

Role of defects and microstructure on the fatigue durability of Inconel 718 obtained by additive layer manufacturing route

Effects of homogenization temperature on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650 °C

Mechanical Behavior of Laser Powder Bed Fusion Processed Inconel 625 Alloy

Machine learning to determine the main factors affecting creep rates in laser powder bed fusion

Development and Evaluation of Generic Test Pieces for Creep Property Assessment of Laser Powder Bed Fusion Components

Effects of Process Parameters and Heat Treatment on Microstructure and Mechanical Characteristics of Laser Powder Bed Fusion Alloy Inconel 718

Experimental investigation of process parameter variations on the microstructure and failure behavior of IN718 structures in PBF-LB/M

The Effect of Precipitates on the Stress Rupture Properties of Laser Powder Bed Fusion Inconel 718 Alloy

Creep Performance Study of Inconel 740H Weldment Based on Microstructural Deformation Mechanisms

Microstructure and mechanical properties at elevated temperatures of as-built and heat-treated Inconel 718 produced through laser powder bed fusion processes

Microstructural, mechanical and wear behaviour of Inconel-718 produced through laser-powder bed-fused additive manufacturing

The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting