Abstract:The integrated gate commutated thyristor (IGCT) is promising in dc grids nowadays. However, to meet the increasing demands for handling high fault currents, the turn-off capability of IGCT still needs to be optimized, which is affected by transient turn-off current redistribution significantly. This article proposes an experiment method based on an isolated anode design for detecting the turn-off current redistribution characteristics of IGCT. Influences of ON-state current density and commutation impedance distribution on IGCT's turn-off current redistribution characteristics are explored in detail. The results show that when IGCT's turn-off process satisfies the "hard" gate drive condition, the anode current redistribution gets changed mainly in the current commutation period and the anode voltage rising period of the turn-off process, before IGCT's dynamic avalanche phenomenon happens. Though the anode current distribution experiences large fluctuations during the commutation period, it will achieve a new balancing state at the end of this period, which almost does not affect the following periods. When IGCT goes into the anode voltage rising period, the ON-state current density distribution will affect the turn-off current redistribution. Under the effects of carrier extraction speed differences, the current density distribution throughout the chip tends to reduce its initial difference, which leads to the phenomenon of "current self-balancing." Meanwhile, the region with the highest ON-state current density dominates the anode voltage's building-up speed. To increase IGCT's turn-off capability, improving the ON-state anode current density uniformity utilizing an optimized layout or cell structure is one of the effective methods.

The dv/dt Capability of RB-IGCT for Hybrid Line Commutated Converter

The Dv/dt Capability of RB-IGCT for Hybrid Line Commutated Converter

Improving dv/dt Immunity of Reverse Blocking IGCT for Hybrid Line-Commutated Converter

Optimal Design of Reverse Blocking IGCT for Hybrid Line Commutated Converter

Abnormal Turn-ON Phenomenon of Large-Size and High-Voltage Reverse Blocking IGCT

Comprehensive Analysis and Experiments of RB-IGCT, IGCT with Fast Recovery Diode and Standard Recovery Diode in Hybrid Line Commutated Converter for Commutation Failure Mitigation

Experimental Investigation on the Turn-Off Failure Mechanism of IGCT

Experimental Evaluation of IGCT Converters with Reduced Di/dt Limiting Inductance

A Novel Detachable Gate Driver Unit with Ultralow Inductance for Integrated Gate Commutated Thyristor

Analysis and Design for Voltage Equalization in RB-IGCT Based Hybrid Commutated Converter Applications

Stray Impedance Measurement and Improvement of High-Power IGCT Gate Driver Units

Hybrid Line Commutated Converter with Fast Commutation Characteristic Based on IGCT for HVDC Application: Topology, Design Methodology, and Experiments

A novel active gate drive for HV-IGBTs using feed-forward gate charge control strategy

Enhancing Turn-off Performance in IGCT-Based High Power Applications—Part Ⅱ: Hybrid Switch with IGBT Integration and Experimental Validation

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

Crosstalk Analysis and Suppression for a Closed-Loop Active IGBT Gate Driver

A Novel Hybrid Line Commutated Converter Based on IGCT to Mitigate Commutation Failure for High-power HVDC Application

Optimization of Operation Temperature of Gate Commutated Thyristors for Hybrid DC Breaker

A Novel Multistage Gate Unit of Integrated Gate Commutated Thyristor

Advanced Active Gate Drive for Switching Performance Improvement and Overvoltage Protection of High-Power IGBTs

Experimental Investigation on the Turn-Off Current Redistribution Characteristics of IGCT Based on an Isolated Anode Design