Experimental Study on Axial Stress and Hammer Impacting Energy of Offshore Standard Penetration Test

Miaojun Sun,Qianlong Zhang,Honglei Sun,Zhenqi Weng
DOI: https://doi.org/10.3390/app13179487
2023-01-01
Applied Sciences
Abstract:Standard penetration test (SPT) has been widely used in offshore exploration because of its unique advantages. Unlike onshore exploration, offshore construction areas are characterized by high waves and water depths ranging from several meters to tens of meters. As a result, the reliability of offshore SPT is significantly reduced compared with onshore SPT. Currently, the probe rod length correction of SPT is not involved in geotechnical engineering investigation codes and related research, which greatly limits the application of this method in offshore exploration. Therefore, a series of SPTs were carried out in offshore environments with different water depths, with a maximum rod length of 65 m. The acceleration and axial stress at each test point of the rod were monitored by the dynamic signal data acquisition system, and the hammer impacting energy at each test point was obtained by Force–Velocity (F-V) method. The test results show that the correction of the rod length of the offshore SPT is different from that of the traditional SPT, and it needs to be further corrected for the water depth. In this paper, a modified method of rod length for offshore SPT is proposed, which can provide reference for the application of offshore SPT.
What problem does this paper attempt to address?