Abstract:To have a better understanding of behaviors of projectiles and concrete targets during impacts at different velocities, experiments and analysis of medium carbon steel long-rod projectiles impact on concrete targets have been carried out in this paper. The impact mechanics of projectiles and concrete targets has been investigated for impact velocities in range of 500m/s to 1700m/s covering three penetration regimes. Based on the observation of the residual projectiles and penetration depths, a deforming model has been proposed to investigate the deformable process of projectiles. Furthermore, deforming penetration model was established based on a rigid penetration model and the projectile deformation parameters, which was validated by the experimental results. The applicability of existing eroding penetration models penetration into concrete were validated and discussed based on the experimental results. At last, the eroding penetration model was further justified and improved by taking the deforming penetration regime into consideration. Influence of projectile and target strength on penetration process were investigated based on the theoretical model. Results show that the crater diameter and depth are linearly proportional to the impact velocity, while the volume of the crater and the initial impact kinetic energy of the projectile have a linear relationship. The calculated diameters of residual projectiles and Depth of Penetration (DOP) with a board range of impact velocities are in good agreement with experimental results. It is noted that projectiles and strength of concrete targets have significantly influences on DOPs and critical velocities.

Study of modified coefficient of dynamic penetration rod length

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Longitudinal wave propagation in a rod with variable cross-section

The Study on Penetration of Constant Kinetic Energy Long-rod Penetrator and Optimal Design

Experimental Study Of Correlation Of Dynamic Compaction For Foundation Backfilled With Crushed Stone

Experimental Study on Axial Stress and Hammer Impacting Energy of Offshore Standard Penetration Test

Full-scale Field Load Testing of Long Drilled Shafts with Enlarged Base Constructed in Marine Sediment

PENETRATION ANALYSIS OF LONG ROD PROJECTILES ON ROCK TARGETS

Analysis of the velocity relationship and deceleration of long-rod penetration

Experimental Studies on Kinetic Projectile's Direct Penetrations with Low-speed Against Reinforced Concrete Targets

A Dynamic Cavity Expansion Model for Rigid Projectile Penetration into Concrete considering the Compressibility and Nonlinear Constitutive Relations

Study on the dynamic characteristics of a hammer-driven-type penetrators in the penetration process

Exponential Model For Simulating Load-Displacement Curve Of Anchor Rod

A New Penetration Model Considering the Strain Rate Effect

On the Elastic Rod Models for Mechanical Tests of One-Dimensional Nanostructures under Transverse Loads

Dynamic modeling and analysis of discontinuous wave propagation in a rod

Large-Deformation Analyses

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers