Abstract:DC circuit breaker (DCCB) is one of the most promising solutions for handling DC fault in half-bridge modular multilevel converter (MMC)-based DC grid. Generally after fault isolation, DCCBs are required to have the ability to quickly reclose so as to restore power transmission. However, the traditional simultaneous reclosing scheme may make the whole system suffer from secondary strikes such as overvoltage and overcurrent in the event of permanent faults. To solve this problem, many adaptive reclosing schemes have been proposed. Among them, the sequential reclosing scheme can achieve rapid recovery without laying any burden on the sampling and protection system. Unfortunately, secondary strikes under a reclosing failure still exist though they can be suppressed. Due to this, this paper illustrates that the overcurrent protection-based fault identification method is not able to identify the fault in time, and thus the secondary strikes are generated during the second tripping. Optimal configuration of DCCBs' parameters can reduce these adverse impacts but cannot avoid them. Based on this, an adaptive reclosing scheme is proposed. Permanent and temporary faults are recognised according to the voltage characteristics at the beginning of the fault line as soon as the arresters are conducted. Extensive simulations on a four-terminal DC grid in PSCAD/EMTDC show that the proposed method can eliminate the potential adverse impacts and is robust to fault resistance.

Investigation of Impulse Aging of Energy-Absorption Elements for Hybrid DC Circuit Breakers

Study on Aging Characteristics of MOV in Energy Absorption Branch of Hybrid DC Circuit Breaker

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Investigation of an Active Current Injection DC Circuit Breaker Based on a Magnetic Induction Current Commutation Module

Investigation Of A Magnetic Induction Current Commutation Module For Dc Circuit Breaker

Simulation on Dynamic Characteristics of MOV Under 8/20 μs Impulse Current Generators with Different Source Impedances

Numerical analysis of the short-time current withstand performance of the DC circuit breaker

Research On Current Commutation Measures For Hybrid Dc Circuit Breakers

Lifetime estimation for hybrid HVDC breakers

An Investigation of Snubber and Protection Circuits Connections for Power-Electronic Switch in Hybrid DC Circuit Breaker

Transient Current Interruption Characteristics of a Novel Mechanical DC Circuit Breaker

Investigation of Arc Characteristics of a DC Vacuum Circuit Breaker With Double-Break Under Asynchronous Interrupting

Optimization Design of Interruption Characteristics of LVDC Hybrid Circuit Breaker

Investigation Of A Novel Igct Module For Dc Circuit Breaker

3-D Transient Finite-Element Analysis and Experimental Investigation of Short-Circuit Dynamic Stability for Air Circuit Breaker

Analysis Of The Interruption Process Of Molded Case Circuit Breakers

Research on the Transient Interrupting Voltage of Mechanical HVDC Circuit Breaker and Its Influences on the Postarc Dielectric Recovery Process

Snubber and Metal Oxide Varistor Optimization Design of Modular IGCT Switch for Overvoltage Suppression in Hybrid DC Circuit Breaker

Analysis of Structure Strength in Medium Voltage DC System High Speed Repulsing Mechanism

Adaptive Sequential Reclosing Strategy for Hybrid HVDC Circuit Breakers in MMC‐based DC Grids

Current Commutation in A Medium Voltage Hybrid Dc Circuit Breaker Using 15 Kv Vacuum Switch and Sic Devices