Abstract:Introducing carbon nanotubes (CNTs) into polymer or ceramic matrices has been a promising approach to obtain ultra-strong, extra-toughened materials as well as multifunctional composites. Most of the previous work on CNT composites has focused on strengthening and toughening of matrix materials at ambient conditions. However, so far there is a lack of information on the mechanical behavior of these composites at elevated temperature. Recently, single-walled CNTs were found to undergo a superplastic deformation with an appealing 280% elongation at a high temperature (Huang et al 2006 Nature 439 281). This discovery implies the high probability for the potential usage of CNTs as reinforcing agents in engineering high-temperature ceramics with improved ductility. Here, for the first time, we demonstrate that a small addition of boron nitride nanotubes (BNNTs) can dramatically enhance the high-temperature superplastic deformation (SPD) of engineering ceramics. More specifically, 0.5 wt% addition of BNNTs leads to an inspiring brittle-to-ductile transition in Al2O3 ceramics even at a moderate temperature (1300 °C). For Si3N4 ceramics, 0.5 wt% addition of BNNTs could also decrease the true stress by 75% under the same deformation conditions. In contrast, addition of micro-sized or nano-sized BN powders has no or a negative effect on the superplasticity of these ceramics. The underlying SPD-enhancement mechanism is discussed in terms of the inhibition of static and dynamic grain growth of the matrix and the energy-absorption mechanism of BNNTs. The unraveled capability of BNNTs to enhance the SPD behavior will make BNNTs promising components in cost-effective complex ceramics with good comprehensive mechanical properties.

Significant Strengthening of Copper-Based Composites Using Boron Nitride Nanotubes

Enhanced mechanical properties of boron nitride nanosheets/copper composites with a bioinspired laminated structure

Structural and Physical Properties of Boron Nitride Nanotubes and Their Applications in Nanocomposites

Progress of CNTs Reinforced Copper-based Composite Preparation

Enhanced Mechanical Properties and High Electrical Conductivity in Multiwalled Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Toughening in Boron Nitride Nanotubes/silicon Nitride Composites

Synergistic Effects of Carbon Nanotubes (CNTs) and White Graphite (h-BN) on the Microstructure and Mechanical Properties of Aluminum Matrix Composites

Synergistically Enhanced the Strength and Ductility of Network-Structured Titanium Matrix Composites Reinforced with B-containing Precursor-Derived TiB Nanowires

Enhancing Superplasticity of Engineering Ceramics by Introducing BN Nanotubes

Interfacial Bonding Improvement through Nickel Decoration on Carbon Nanotubes in Carbon Nanotubes/Cu Composite Foams Reinforced Copper Matrix Composites

Investigation of Microstructure and Strengthening Mechanism in CNTs Reinforced Mo-based Composites

Influences of Carbon Nanotubes on Performance of W-Cu Composite Materials

Boron nitride nanosheets as precursors for 3D nano-configurations in titanium matrix composites: interfacial evolution and mechanical behavior

Enhancement mechanisms of mechanical, electrical and thermal properties of carbon nanotube-copper composites: A review

Enhancement of flexural and shear properties of carbon fiber/epoxy hybrid nanocomposites by boron nitride nano particles and carbon nano tube modification

Performance enhancement of carbon/copper composites based on boron doping

Enhancement of ultimate tensile strength and ductility of copper matrix composites using a low content of single-wall carbon nanotubes

Bamboo-like dual-phase nanostructured copper composite strengthened by amorphous boron framework

Fabrication of Carbon Nanotube Reinforced Al Composites with Well-Balanced Strength and Ductility

Carbon nanotube mat/boron nitride composite materials for aerospace applications

Unveiling the Strengthening and Toughening Effects of Copper-Coated Carbon Nanotubes for the Allicu Alloy Matrix Composite