Abstract:Because of the dilemma that the current industrial Cu enhancement methods lead to a significant decline in conductivity and ductility, Cu matrix composites reinforced by oriented multi-walled carbon nanotubes (MWCNTs) were prepared through sintering, hot extrusion, and cold drawing. Before sintering, Ni, Cu, and Ni&Cu coatings were electroless plated on MWCNTs as the intermediate transition layer, and then they were mixed with Cu powder through a nitrogen bubbling assisted ultrasonic process. By analyzing the composition, microstructure, and formation mechanism of the interface between MWCNTs and the matrix, the influence and mechanism of the interface on the mechanical properties, conductivity, and ductility of the composites were explored. The results indicated that MWCNTs maintained a highly dispersed and highly consistent orientation in the Cu matrix. The coating on Ni@CNT was the densest, continuous, and complete. The Ni@CNTs/Cu composite had the greatest effect, while the Cu composite reinforced by MWCNT without coating had the smallest reduction in elongation and conductivity. The comprehensive performance of the Cu@CNTs/Cu composite was the most balanced, with an ultimate tensile strength that reached 373 MPa, while the ductility and conductivity were not excessively reduced. The axial electrical and thermal conductivity were 79.9 IACS % (International Annealed Copper Standard) and 376 W/mK, respectively.

Influences of Carbon Nanotubes on Performance of W-Cu Composite Materials

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Enhancement mechanisms of mechanical, electrical and thermal properties of carbon nanotube-copper composites: A review

Effects of carbon nanotube reinforcement and grain size refinement mechanical properties and wear behaviors of carbon nanotube/copper composites

Effects of Carbon Nanotubes Incorporation on the Grain Growth and Properties of WC/Co Nanocomposites

Effects of Cu Content on Microstructures and Compressive Mechanical Properties of CNTs/Al-Cu Composites

Effect of Carbon Nanotubes and High Temperature Extrusion on the Microstructure Evolution of Al-Cu Alloy

Study on Effects of Cnts on the Properties of Wc-Based Impregnated Diamond Matrix Composites

Effect of Carbon Nanotubes Additives on Mechanical Properties of WC-6Co Cemented Carbide

Influence of carbon nanotube content on microstructures and mechanical properties of carbon/carbon composite

EFFECT OF CARBON NANOTUBES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF W

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy

Influence of acid-treated time of carbon nanotubes on mechanical property in carbon nanotubes reinforced copper matrix composites

Enhancement of ultimate tensile strength and ductility of copper matrix composites using a low content of single-wall carbon nanotubes

Mechanical and Conductive Properties of Cu Matrix Composites Reinforced by Oriented Carbon Nanotubes with Different Coatings

Influence of Embedded-Carbon Nanotubes on the Thermal Properties of Copper Matrix Nanocomposites Processed by Molecular-Level Mixing

Microstructures and Tensile Behavior of Carbon Nanotubes Reinforced Cu Matrix Composites with Molecular-Level Dispersion

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

Analysis of Load Transfer Mechanism in Cu Reinforced with Carbon Nanotubes Fabricated by Powder Metallurgy Route

Effect of carbon nanotube content and annealing temperature on corrosion performance of carbon nanotube/Ni composite layer

The Influence of the Modification of Carbon Nanotubes on the Properties of Copper Matrix Sintered Materials