Abstract:This paper focused on the morphology effects of the low and high boron composite nanoparticles in the Ti-Al-O-B quaternary system on reinforcing the copper metal matrix composite via the accumulative roll bonding. To evaluate the impact of reinforcement composition on nanoparticle structure, the B/(Ti+Al) ratio was increased from 0.8 to 2.4 and it was found that the nanoparticles' morphology was changed from polygonal to whiskers. Also, the Al 18 B 4 O 33 and AlB 2 were remarkably increased with rising the boron content. The novelty of this work is to find how the nanostructured composite of borates/borides/oxides can reinforce the copper sheets via the accumulative roll bonding process. Hence, the microstructures and mechanical properties of copper sheets over three passes of accumulative roll bonding process were investigated. The results indicated that the morphology of the nanoparticles caused a different anisotropy in the mechanical properties such as hardness, strengths, and deformations in the various directions. The hardness of copper sheets was enhanced from 40 Hv to 79 and 111 Hv by reinforcing with low and high boron content nanoparticles respectively, after three passes of the accumulative roll bonding process. Also, it was found that the nano-whiskers exhibited superior strengthening effects to spherical counterparts that acted as formidable barriers against dislocation movement within the copper matrix. The ultimate tensile strength of specimens was calculated at 197 and 215 MPa, respectively, after three passes of the accumulative roll bonding process. The results revealed a density of dislocations of 1.4×10 13 m −2 for copper sheets reinforced by low boron content nanostructures, escalating to 3.2×10 13 m −2 for high boron content counterparts. These findings highly suggest the borate-boride-oxide nano-whiskers as the effective reinforcement of the metal matrix composites.

Enhanced mechanical properties of boron nitride nanosheets/copper composites with a bioinspired laminated structure

Aligning Graphene in Bulk Copper: Nacre-inspired Nanolaminated Architecture Coupled with In-Situ Processing for Enhanced Mechanical Properties and High Electrical Conductivity

Significant Strengthening of Copper-Based Composites Using Boron Nitride Nanotubes

Enhanced Mechanical Properties and High Electrical Conductivity in Multiwalled Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Bamboo-like dual-phase nanostructured copper composite strengthened by amorphous boron framework

Role of Structural Parameters on Strength-Ductility Combination of Laminated Carbon Nanotubes/copper Composites

Neutron-Absorption Properties of B/Cu Composites

Performance enhancement of carbon/copper composites based on boron doping

Reinforced Cu sheets with accumulative roll bonding process in assisting nanostructured composite of low and high boron contents; Effects of morphology and composition of reinforcement

A comparison study of the strengthening effect of carbon nanomaterial reinforcements in the 3D skeleton-reinforced copper matrix composites

Fabrication and mechanical properties of nano‐carbon reinforced laminated Cu matrix composites

Interfacial Bonding Improvement through Nickel Decoration on Carbon Nanotubes in Carbon Nanotubes/Cu Composite Foams Reinforced Copper Matrix Composites

Achieving high ductility in layered carbon nanotube/copper composite prepared by composite electrodeposition

Enhanced Mechanical Properties of Graphene (reduced Graphene Oxide)/Aluminum Composites with A Bioinspired Nanolaminated Structure

Improvement of Interfacial Wetting and Mechanical Electrical Properties of Cu-B/ Sintered-Carbon Composites

Electroless deposition surface engineering of boron nitride sheets for enhanced thermal conductivity and decreased interfacial thermal resistance of epoxy composites

Achieving Balanced Properties in Graphene/cu Composite with Oriented Bimodal Grains: Strength, Ductility, and Conductivity

Beyond the Dimensional Limitation in Bio-Inspired Composite: Insertion of Carbon Nanotubes Induced Laminated Cu Composite and the Simultaneously Enhanced Strength and Toughness

Enhancement of ultimate tensile strength and ductility of copper matrix composites using a low content of single-wall carbon nanotubes

Achieving Better Strength-Toughness Synergy in Heterogeneous Cu/Ni/graphene Composites: A Molecular Dynamics Simulation

Thin-Copper-Layer-Induced Early Fracture in Graphene-Nanosheets (Gnss)-Reinforced Copper-Matrix-Laminated Composites