Abstract:Simultaneously achieving high strength and ductility is a critical issue for graphene nanoplates (GNPs) reinforced aluminum matrix composites. Layered structures and in situ nanoparticles were applied to achieve the strengthening and toughening of GNPs reinforced aluminum matrix composites from the structure and compo-sition design, respectively. Therefore, the discontinuous layered AA6111 matrix composites synergistically reinforced with GNPs and in situ ZrB2 nanoparticles were prepared by the composite melt preparation method and hot rolling. The discontinuous layered structure features of graphene, particles, and matrix were investi-gated. The interfaces between reinforcements and the matrix were further characterized by high-resolution transmission electron microscopy. It was found that the improved load transfer efficiency of GNPs was mainly attributed to the formation of a high-strength amorphous alumina interface between GNPs and the aluminum, as well as the pinning effect of the Al2Cu particles on GNPs' surface. By analyzing characteristics of the dislocation configuration, GNPs and nanoparticles boosted the dislocation storage capacity of the composite, while the particles dispersed the stress concentration at the edge tip of GNPs, thereby improved the composite's ductility. The composite achieved a 50% (349 MPa) increase in yield strength with only a 30% compromise on ductility (13.8%), leading to a notable improvement in toughness. The research revealed an efficient way for manufacturing high strength-ductility metal matrix composites with discontinuous layered structures via well -bonded interfaces employing GNPs and nanoparticles.

Fabrication and mechanical properties of nano‐carbon reinforced laminated Cu matrix composites

Microstructure and mechanical properties of bioinspired laminated Al matrix hybrid reinforced with B4C and graphene nanoplatelets

Enhanced Mechanical Properties and High Electrical Conductivity in Multiwalled Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Strengthening‐toughening of Graphene Nanoplates and in Situ ZrB2 Nanoparticles Reinforced AA6111 Matrix Composites with Discontinuous Layered Structures

Enhanced Mechanical Properties of CNTs/Mg Biomimetic Laminated Composites

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

Microstructure and mechanical properties of bioinspired laminated CoCrFeNiMn high entropy alloy matrix composites reinforced with graphene

Interfacial Design of Graphene Nanoplate Reinforced Copper Matrix Composites for High Mechanical Performance

Beyond the Dimensional Limitation in Bio-Inspired Composite: Insertion of Carbon Nanotubes Induced Laminated Cu Composite and the Simultaneously Enhanced Strength and Toughness

Strength-toughness Combination in Nickel Matrix Composites Reinforced by Hybrid Graphene Nanoplatelets-Titanium Diboride

Influence of GNPs@Cu on high-temperature mechanical and thermal properties of laminated MTZ composites

Thin-Copper-Layer-Induced Early Fracture in Graphene-Nanosheets (Gnss)-Reinforced Copper-Matrix-Laminated Composites

Comprehensive performance regulation of Cu matrix composites with graphene nanoplatelets in situ encapsulated Al2O3 nanoparticles as reinforcement

Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability

Realizing the combination of high strength and good ductility of Cu matrix composites with CrCoNi reinforcement particles and microlaminated structure

Revealing the Toughening Mechanisms in Graphene/tungsten Nanocomposites with Hierarchical Nacre-Like Structures

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

The enhanced mechanical properties and strain-hardening capability of CNT/Al composites achieved by heterogeneous micro-laminated architecture

High strength and electrical conductivity of copper matrix composites reinforced by carbon nanotube-graphene oxide hybrids with hierarchical structure and nanoscale twins

Powder-metallurgical construction of graphene-like nanosheet network reinforced Cu composites towards balanced high-performance

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets