Abstract:Purpose: To develop an angular correction methodology and characterize a high-resolution complementary metal-oxide-semiconductor (CMOS) array for patient specific quality assurance on a robotic arm linear accelerator. Methods: Beam path files from the treatment planning software (TPS) were used to calculate the angle of radiation beam with respect to the detector plane. Beams from multiple discrete angles were delivered to the CMOS detector array and an angular dependency look up table (LUT) was created. The LUT was then used to correct for the angular dependency of the detector. An iso-centric 5 mm fixed cone, non iso-centric multi-target fixed cone, 10 mm Iris and a multi-leaf collimator (MLC) based collimated plan were delivered to the phantom and compared to the TPS with and without angular correction applied. Additionally, the CMOS array was compared to gafchromic film and a diode array. Results: Large errors of up to 30% were observed for oblique angles. When angular correction was applied, the gamma passing rate increased from 99.2% to 100% (average gamma value decreased from 0.29 to 0.14) for the 5-mm iso-centric cone plan. Similarly, the passing rate increased from 84.0% to 100% for the Iris plan and from 49.98% to 98.4% for the MLC plan when angular correction was applied. For the multi-target plan, applying angular correction improved the gamma passing rate from 94% to 99.6%. The 5 mm iso-centric fixed cone plan was also delivered to film, and the gamma passing rate was 91.3% when using gafchromic film as the reference dataset, whereas the diode array provided insufficient sampling for this plan. Conclusion: A methodology of calculating the beam angle based on the beam path files was developed and validated. The array was demonstrated to be superior to other quality assurance tools because of its sub-millimeter spatial resolution and immediate read out of the results.

Changing Trends of Pixel Solid Angles of Long Linear Device under Circular Cold Shield and Its Imaging Simulation

The Optical Design of Highly Efficient Cold Shield in IR Detector Based on ASAP

Analyzing the Effects of Stray Light to Different Critical Dimension Based on Kirk Test

Mechanics of Hemispherical Electronics

THE DESIGN OF THE SHIFTING SECTION OF AN INTENSIFIER SILICON TARGET PICK-UP TUBE

A Study of the Impact on Telecentricity to the Illumination System Based on Ccd Imaging

Ray Ellipse Method of Analyzing the Power and Polarization State of Partially Polarized Light

Electrical-modelling, design and simulation of cumulative radiation effects in semiconductor pixels detectors: prospects and limits

Accurate Computation of the Area of Projected Surface under Limitation of Circular Cold Shield with MATLAB

The X-Ray Imaging System'S Requirements for Ccd Pixel

Performance evaluation of high-resolution square parallel-hole collimators with a CZT room temperature pixelated semiconductor SPECT system: a Monte Carlo simulation study

Aberration Analysis and Adjustment of Non-Spherical Lens in the Linear Ccds Three-Dimensional Measurement System

The Effect of Pixel Design and Operation Conditions on Linear Output Range of 4T CMOS Image Sensors

TCAD Analysis of Leakage Current and Breakdown Voltage in Small Pitch 3D Pixel Sensors

A Novel Linear CCD Variable Velocity Two-Dimensional Imaging Approach Based on Adaptive Image Segmentation

Simulation and Measurement of Pixelated CZT Detector

A study on the shielding mechanisms of SOI pixel detector

Radiation hardness study on a CMOS pixel sensor for charged particle tracking

Angular correction methodology and characterization of a high-resolution CMOS array for patient specific quality assurance on a robotic arm linac

Mechanism Analysis and Experiment Simulation on Radiation Effects of CCDs

High-transmittance Vertical-Alignment Liquid Crystal Display with Subpixel Electrode Shielding Electric Field Design.