Abstract:In order to improve the ability of shield machine during the curved excavation of shield tunnel,operation parameters such as copy cutter length,range and articulation angle should be precisely forecasted.However,above operation parameters,which were set based on plane geometry theory of shield and tunnel design axes,failed to meet requirements of the 3D curved tunnel construction.A theoretical algorithm of copy cutter length,range and articulation angle of the 3D curved tunnel was proposed based on the spatial vector analysis.Calculation formulas were solved by Fortran program.Furthermore,the simulation of operation parameters in an actual shield tunnel was performed.Values of simulation were compared with measured results to verify the validity of the proposed algorithm.The results show that measured values of articulation angle are well consonant with the ones of simulation.When shield machine excavates at curved sections,the measured value is a little larger than the value of simulation.Through taking fitting tunnel design axes in the center point of cutter disc as an object of rectifying a deviation in the actual construction,there are differences between measured values and ideal values of fitting tunnel design axes in the center point of segment.The simulated range of copy cutter is narrower than the measured range but the simulated value of copy cutter length is a little larger than the measured value.The main reason of differences is that there exists deformation in the stratum in the actual construction but the assumption of the shield is that there is no extrusion as well as no deformation.

Accurate Computation of the Area of Projected Surface under Limitation of Circular Cold Shield with MATLAB

A Novel Conformal Surface Current Technique for Large Problems Based on High-Performance Parallel FDTD Method

Accurate Simulation of Shielding Effectiveness of Metallic Cabins Using an Improved Calderón Preconditioner-Based Time-Domain Integral Equation Method

A modified high-order FDTD conformal technique for modeling perfectly conducting objects

Shielding Effectiveness Characterization of Metallic Rectangular Cascaded Enclosures

The Monte Carlo Method for the Computation of Projected Cross-Sectional Areas of Geometrically Complex Spacecraft

A New Method Solving Problems of Electromagnetic Shielding for a Thin Cylindrical Shell of Arbitrary Cross Section

Numerical analysis of surface settlement induced by shield tunnel construction of adjacent structure

Analysis of Radiation Characteristics of Conformal Microstrip Arrays Using Adaptive Integral Method

Theoretical Algorithm for Over-excavated Volume and Articulation Angle During Shield Tunneling Along Sharp Curves

Numerical Simulation of Shield Through the Masonry Structure at Different Angles

Analytical Formulae for Projected Solid Angle on Arbitrary Polygonal Cross Sections

Methodology and Strategy on the Calculation of 3D Electric Field on Shielding Rings of UHV DC Transmission Lines

Changing Trends of Pixel Solid Angles of Long Linear Device under Circular Cold Shield and Its Imaging Simulation

Approximate Method of Circular Surface Processing

Verification of shielding effect predictions for large area field emitters

Application of CAE Technology Based on High Performance Computing in Large-Scale Shield Construction Process

A Practical Approach for Predicting Surface Settlements Induced by Shield Tunneling

On the accurate computation of the true contact-area in mechanical contact of random rough surfaces

Analysis of the shielding effectiveness of rectangular enclosure of metal structures with apertures above ground plane

A simple approach to the numerical simulation with trimmed CAD surfaces