Abstract:The construction of new tunnels poses a threat to the operational safety of closely existing tunnels, and the construction mode of parallel undercrossing over short distances has the most significant impact. In this study, a new double-line shield tunnel parallel undercrossing of existing tunnels in Hefei, China, is taken as an example. A three-dimensional (3D) numerical model using FLAC 3D finite difference software was established. The dynamic construction of the new double-line shield tunnel undercrossing the existing subway tunnel over a short distance and in parallel was simulated. The pattern of existing tunnel settlement and change in lining stress caused by the shield tunnelling process were analyzed. The reliability of simulation was verified through field-monitoring data. Finally, based on the numerical model, the effects of change in stratum sensitivity on the settlement of existing tunnel, lining internal force, and surface settlement are discussed. The results show that during shield tunnelling, the maximum ground settlement is 3.9 mm, the maximum settlement at the arch waist of existing tunnel near the new tunnel is 7.75 mm, and the maximum vault settlement is 5.38 mm. The maximum stress of lining of existing tunnel before the excavation is 7.798 × 10 5 Pa. After the construction of double-line shield tunnel, the maximum stress of lining is 1.124 × 10 6 Pa, an increase of 44% than that before the construction. The surface settlement and tunnel settlement are sensitive to the weakening of soil layer strength, and lining stress is not affected by the weakening of soil layer strength. The field-monitoring results are consistent with the numerical simulation results, and the model calculation is reliable. This study plays an important role in ensuring construction safety and optimizing the construction risk control of a tunnel.

Application of CAE Technology Based on High Performance Computing in Large-Scale Shield Construction Process

Influences of Shield Advance Rate and Abnormal Machine Halt on Tunnelling-Induced Ground Surface Settlements

Mechanical structure and hydraulic system design of 1.2 m simulated shield machine

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Monitoring System of Shield Tunneling Machine Based on Adaptive Control Technology

Study on the Influence and Control Methods of Shield Tunneling Through the Sensitive Buildings

Key Technologies of Shield Tunneling Machine and Present Status and Prospect of Test Rigs for Tunneling Simulation

Design and Research on Hydraulic Thrust System of Simulative Shield

Numerical analysis of surface settlement induced by shield tunnel construction of adjacent structure

Numerical simulation of shield tunnel construction of adjacent framework structure building

Mechanical Behavior Monitoring and Load Inversion Analysis of Large-Diameter Underwater Shield Tunnel During Construction

Research on Surface Heave and Subsidence Caused by Multi-factor in Double-line Shield Tunnels Construction

Application of Numerical Simulation Technology in New Intelligent Reinforcing Method of Shield Tunnel End in Seaside Environment

Analysis of Coupled Seepage and Stress of Shield Tunnel Launching Accident in Soft Clay

Numerical Simulation of a Deep Excavation Near a Shield Tunnel

Numerical Analysis and Comparison of Soil Freezing Schemes for Replacement of Shield Tail Brush in Long-Distance Tunnel Engineering

Comparative study of analytical and numerical solutions on starting shaft disaster in shield launching

Three-dimensional Hydro-Mechanical Coupling Numerical Simulation of Shield-Driven Cross-River Twin Tunnels: A Case Study

Condition Monitoring System of Simulator Test Rig for Shield Tunnelling Machine

Numerical Study on the Disturbance Effect of Short-Distance Parallel Shield Tunnelling Undercrossing Existing Tunnels

Finite Element Simulation Analysis on Shield Tunnel Driven Process