Abstract:During five-axis cutting, the unreasonable selection of the tool’s diameter and processing width will greatly affect processing efficiency. However, the existing tool’s diameter and processing width values avoid local over-cutting, which is conservative. Therefore, a calculation method of optimal cutting diameter and processing width based on machining interference surface with flat-end cutter as the research object is proposed in this paper. First, the offset surface of discrete points is constructed as the machining interference surface based on the implicit surface theory. The surface offset is the maximum allowable machining error. Then, according to the Dupin indicatrix line between the tool and the machining surface, sufficient and necessary conditions for the local malleability of the flat-end cutter are obtained. Based on the constructed machining interference surface, the optimal diameter of the tool is calculated via the effective cutting profile curve of the tool at the interference surface. Next, the next cutter contact point is obtained by intersecting the tangent line between the cutter contact point and the upper or lower limit surface of the machining interference surface and the cutting path curve. The processing width is calculated according to the distance between the two adjacent cutter contact points. Finally, the proposed algorithm is verified by CAM software simulation and experiments by taking a complex surface as an example. The experimental results show that the optimization algorithm of the tool’s diameter and bandwidth under the constraint of machining interference surface can shorten the machining time and obtain higher machining efficiency in the NC machining of complex surfaces.

Approximate Method of Circular Surface Processing

Surface Accuracy Optimization of Mechanical Parts with Multiple Circular Holes for Additive Manufacturing Based on Triangular Fuzzy Number

An accurate surface error optimization for five-axis machining of freeform surfaces

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

An efficient five-axis machining method of centrifugal impeller based on regional milling

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Study of the Tool Path Generation Method for an Ultra-Precision Spherical Complex Surface Based on a Five-Axis Machine Tool

Study on High-Precision Computer-Controlled Aspheric Surface Processing Techniques

Global Optimization of Tool Path for Five-Axis Flank Milling with a Cylindrical Cutter

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

Analytical Expression Of The Swept Surface Of A Rotary Cutter Using The Envelope Theory Of Sphere Congruence

A new rough machining approach for a ruled surface impeller

Calculation of Cutter-location and Error Analysis in Numerical Control Flank Milling of Twisted Ruled Surface Impeller

Modeling the Surface Swept by a Milling Cutter by Using the Envelope Theory of Two-parameter Family of Spheres

Tool path optimal design for slow tool servo turning of complex optical surface

On-machine measurement method and geometrical error analysis in a multi-step processing system of an ultra-precision complex spherical surface

A Surface Enveloping-Assisted Approach on Cutting Edge Calculation and Machining Process Simulation for Skiving