Abstract:The sulphate is an important factor restricting the efficient and stable operation of the activated coke (AC) flue gas purification system. The simulation experiments and in situ infrared tests of AC taken from desorption tower of the AC flue gas purification system were carried out to first calibrate the thermal desorption characteristics of adsorbed NH3 and sulphate and explore the reaction behaviour of NH3 with SO2 and H2SO4. On this basis, some advice for optimising the sulphate generation was put forward to improve the purification efficiency of the AC system. The results show that the temperatures of the desorption of adsorbed NH3, the decomposition of (NH4)2SO4 and NH4HSO4 are 224, 276 and 319 °C, respectively, which lays the foundation for the quantitative analysis of sulphate on AC. Regardless of the NH3 amount, only a small portion of H2SO4 is converted to sulphate, as the H2SO4 deposited in AC pores or agglomerated together could not come into contact with NH3. The final reaction product of NH3 and SO2 is mainly (NH4)2SO4 which is continuously generated because the newly generated H2SO4 is continually exposed to NH3, if NH3 is enough. The reaction of NH3 with H2SO4 takes precedence over with NH4HSO4. In the initial stages in which H2SO4 is exposed to NH3, the product is essentially all NH4HSO4 as intermediate. Then, it is further converted to (NH4)2SO4 whose amount reaches equilibrium when the accessible H2SO4 is exhausted. All the NH3 adsorbed on AC entering the desulphurisation tower generates NH4HSO4, but the amount is limited. The remaining SO2 entering the denitrification tower mainly generates (NH4)2SO4; thus, limiting the remaining SO2 amount is necessary to guarantee denitrification efficiency. When the NH3 injection is changed to the desulphurisation tower, the initial NH3 injection rate can be increased to complete the conversion of accessible H2SO4 as soon as possible in order to obtain higher denitrification efficiency.

Experimental Investigation and Fitting Calculation for Resistance in Activated Coke Desulfurization

Adsorption Performance of SO_2 in Fixed Bed of Activated Coke

Activated Coke Prepared by Circulating Fluidized Bed Coal Pyrolysis Semi-coke for Desulphurization

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Desulfurization Performances of Activated Coke Prepared from Fine Blue-Coke

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Adsorption characteristics of SO2 onto novel activated carbon fixed bed: kinetics, isotherms, thermodynamics and washing regeneration

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

Resource Utilization of Exhausted Activated Coke As the Efficient Material for Simultaneous Removal of Cos and H &Lt;sub>2</sub>s

Insights into the Effect of Adsorption–Desorption Cycles on SO2 Removal over an Activated Carbon

Online Estimation of Coke in A Circulating Fluidized Bed Based on Acoustic Emission Sensors and Multivariate Calibration

Adsorption of organic pollutants from coking wastewater by activated coke

Systematic investigation of SO2 adsorption and desorption by porous powdered activated coke: Interaction between adsorption temperature and desorption energy consumption

Biomass and Coal Modification to Prepare Activated Coke for Desulfurization and Denitrification

Experimental, RSM modelling, and DFT simulation of CO2 adsorption on Modified activated carbon with LiOH

The Effect of the Surface Properties of Activated Coke Derived from Coal on the Desulfurization Capability

Reaction Intermediates and Products Characterisation of NH3 in Desulphurisation with Activated Coke

Experimental Study on the Improvement of Char Physicochemical Properties and Reactivity by Activation Process in CFB

CO combustion model for circulating fluidized bed combustor

Experimental Study of Breakthrough Adsorption on Activated Carbon for CO2 Capture

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon