Activated Coke Prepared by Circulating Fluidized Bed Coal Pyrolysis Semi-coke for Desulphurization

Yan ZHU,Wei-qiang ZENG,Qin-hui WANG,Meng-xiang FANG,Zhong-yang LUO,Zheng-lun SHI
DOI: https://doi.org/10.12034/j.issn.1009-606X.216305
2017-01-01
Abstract:Shaped activated coke (AC) was prepared from circulating fluidized bed coal pyrolysis semi-coke and coal tar by CO2 activation.Different proportions of V2O5,Cr2O3 and Fe2(SO4)3 were loaded on ACs by equal volume impregnation method.Abrasion and compressive strengths of ACs were measured according to corresponding GB.Pore structures of the ACs were characterized by N2 adsorption,and desulfurization performances of different ACs were tested on fixed bed system.The results showed that proper conditions at which to produce shaped active coke with high strength and high desulfurization capacity were coal tar 30%,carbonization temperature 600 ℃,carbonization time 60 min,activation temperature 950 ℃,activation time 80 min and CO2 flow rate 15 mL/(min.g).Desulfurization performances of ACs showed a significant positive correlation with specific surface area,microporous pore volume and total pore volume.Loading V2O5 highly improved the desulfurization performance and the optimum proportion of V2O5 was 1%.Loading Cr2O3 or Fe2(SO4)3 was incapable of improving the desulfurization performance.The proper space velocity was 1500 h-1 while using ACs for flue gas desulfurization and desulfurization etficiency above 90% maintained more than 4 h in this space velocity.
What problem does this paper attempt to address?