Activated coke preparation by physical activation of coal and biomass co-carbonized chars
Yukun Li,Lin Lu,Shuang Lyu,Huanhuan Xu,Xiaohan Ren,Yiannis A. Levendis
DOI: https://doi.org/10.1016/j.jaap.2021.105137
IF: 6
2021-06-01
Journal of Analytical and Applied Pyrolysis
Abstract:<p>Activated cokes have been prepared with a two-step process: co-carbonization of bituminous coal and poplar bark biomass in nitrogen at moderate temperatures, followed by physical activation of the char residues with CO<sub>2</sub> and steam at higher temperatures. The microstructures, pore distributions and surface chemical characteristics of the generated chars were examined by Scanning Electron Microscopy (SEM), N<sub>2</sub> adsorption, and Fourier Transform Infrared Spectroscopy (FTIR). This study assessed the effects of the mixing ratio of bituminous and biomass feedstocks, the carbonization temperature, as well as the type and mole fraction of activation agents on the pore structure of the produced activated cokes. It was found that char obtained by co-carbonization of coal and biomass at a ratio of 2:1, at 600 °C for 30 min, had the highest micropore surface area at 200 m<sup>2</sup>/g. Subsequent activation of this char, at 800 °C for 90 min, with 40 % CO<sub>2</sub> and 10 % steam resulted in a threefold increase of micropore surface area (607 m<sup>2</sup>/g). Steam enhanced pore broadening and, thus, it promoted the formation of mesoporous structure, while CO<sub>2</sub> promoted additional development of microporous structure. As a result, activated coke with extensive and multimodal pore size distribution was produced.</p>
engineering, chemical,chemistry, analytical,energy & fuels