Abstract:The effect of Ag addition on the precipitation evolution and interfacial segregation for Al–Mg–Si alloys was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), atom probe tomography (APT) and density functional theory (DFT) calculation. At the early aging stage, Ag atoms could enter clusters and refine the distribution of these clusters. Then, Ag atoms preferentially segregate at the GP zone/α-Al and β"/α-Al interfaces at the peak aging stage by the replacement of Al atoms in FCC matrix. With prolonging aging time, Ag atoms generally incorporate into the interior of β" precipitate, facilitating the formation of QP lattice (a hexagonal network of Si atomic columns) and the local symmetry substructures, Ag sub-unit (1) and Ag sub-unit (2). At the over-aged stage, the Ag sub-unit (1) and Ag sub-unit (2) could transform to the β′Ag (i.e. β′Ag1 and β′Ag2.) and Q′Ag unit cells, respectively. All the precipitates at the over-aging stage have a composite and disordered structure due to the coexistence of different unit cells (β′Ag1, β′Ag2, Q′Ag and β′) and the non-periodic arrangement of Ag atoms within the precipitate. In the equilibrium stage, the incorporated Ag atoms in the precipitates release into the α-Al matrix as solute atoms or form Ag particles. In general, Ag atoms undergo a process of “segregate at the precipitate/matrix interface → incorporate into the interior of precipitate → release into the α-Al matrix” during the precipitation for Al–Mg–Si–Ag alloys. Besides, Ag segregation is found at the interfaces of almost all metastable phases (including GP zone, β″, β′/β′Ag phase) in Al–Mg–Si–Ag alloys. The Ag segregation at the β′/α-Al interface could increase the length/diameter ratio of β′ phase and thus promote the additional strengthening potential of these alloys. These findings provide a new route for precipitation hardening by promoting the nucleation and morphology evolution of precipitates.

Si-induced Precipitation Modification and Related Age-Hardening Response of an Al–4Mg–1Cu–0.5Si Alloy

Effects of Si Additions on the Precipitation Hardening Response in Al-Cu-Mg(-Ag) Alloys

Effect of Cu addition on precipitation and age-hardening response of an Al-15%Mg2Si alloy

Microstructure and Precipitation Hardening of As-cast Al-Cu-Mg-Mn-Ag-(-Si) Alloys

Effect of Silicon Addition on the Microstructure and Precipitation of Cast Al-5.3Cu-0.8Mg-0.6Ag Alloys

Influence of Mg and Cu on Precipitation Behaviors and Mechanical Properties of Al-Si Alloys

Analyzing Si Precipitation on Age Hardening of an Al-Si-Mg Cast Alloy

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

Precipitation Kinetics and Hardening Mechanism in Al-Si Solid Solutions Processed by High Pressure Solution Treatment

Effect of Ag Addition on the Precipitation Evolution and Interfacial Segregation for Al–Mg–Si Alloy

Precipitates evolution and strengthening of Al–Mg2Si alloys containing high-Cu contents during ageing process

Study on suppression and acceleration of aging precipitation reaction in Al-Cu alloys

Enhancing Mechanical Performances by Unconventional Si Precipitates Obtained in Pressure-Induced Al-Si-Cu-(Mg) Solid Solutions

The effects of Ti on the precipitation evolution and age-hardening behavior of Al–7Si–Mg alloy

Precipitation Sequence of an Aged Al-Mg-Si Alloy

Initial Precipitation and Hardening Mechanism During Non-Isothermal Aging in an Al–Mg–Si–Cu 6005A Alloy

Investigation of the As-Solidified Microstructure of an Al–Mg–Si–Cu Alloy

The Role of Si on Microstructure, Mechanical and Local Corrosion Behaviors of an Al–Cu–Mg–Si Alloy with High Cu/Mg Ratio

Effect of Trace Silicon Addition on Microstructure and Properties of a Cu–0.26Cr–0.14Mg Alloy

Precipitation Behavior and Hardening Effects of Si-containing Dispersoids in Al–7Si–Mg Alloy During Solution Treatment

Effect of Si addition on the precipitation and mechanical/electrical properties of dilute Al-Zr-Sc alloys