Frontiers of Carbon Materials As Capacitive Deionization Electrodes

Yuanyuan Li,Nan Chen,Zengling Li,Huibo Shao,Liangti Qu

DOI: https://doi.org/10.1039/d0dt00684j

IF: 4

2020-01-01

Dalton Transactions

Abstract:Carbon materials are widely used as capacitive deionization (CDI) electrodes due to their high specific surface area (SSA), superior conductivity, and better stability, including activated carbon, carbon aerogels, carbon nanotubes and graphene.

What problem does this paper attempt to address?

Research progress on the application of carbon-based composites in capacitive deionization technology

Qisheng Huang,Lei Sheng,Tao Wu,Lei Huang,Jia Yan,Meng Li,Zhenxin Chen,Hongguo Zhang

DOI: https://doi.org/10.1016/j.desal.2024.118197

IF: 11.211

2024-10-25

Desalination

Abstract:Capacitive deionization (CDI) technology is favored by researchers for its environmental friendliness and higher selectivity. Among a number of electrode materials, carbon-based nanomaterials are considered suitable materials for CDI electrodes due to their excellent chemical stability, better economic benefits, etc. However, the conductivity and hydrophilicity of pure carbon electrode materials are generally poor. Therefore, researchers have focused on carbon-based composites. This paper provides a comprehensive review of carbon‐carbon composite materials and various carbon-based materials composited with metal oxides, metal-organic frameworks (MOFs), and polymers. In addition, the article summarizes the ion storage mechanism of CDI. Finally, the article provides an outlook on the future applications of CDI. It could provide good guidance for designing carbon-based materials for capacitive deionization.

engineering, chemical,water resources
Asymmetric Electrodes Constructed with PAN-Based Activated Carbon Fiber in Capacitive Deionization

Mingzhe Li,Yingzhi Chen,Zheng-Hong Huang,Feiyu Kang

DOI: https://doi.org/10.1155/2014/204172

IF: 3.791

2014-01-01

Journal of Nanomaterials

Abstract:Capacitive deionization (CDI) method has drawn much attention for its low energy consumption, low pollution, and convenient manipulation. Activated carbon fibers (ACFs) possess high adsorption ability and can be used as CDI electrode material. Herein, two kinds of PAN-based ACFs with different specific surface area (SSA) were used for the CDI electrodes. The CDI performance was investigated; especially asymmetric electrodes’ effect was evaluated. The results demonstrated that PAN-based ACFs showed a high electrosorption rate (complete electrosorption in less than half an hour) and moderate electrosorption capacity (up to 0.2 mmol/g). CDI experiments with asymmetric electrodes displayed a variation in electrosorption capacity between forward voltage and reverse voltage. It can be attributed to the electrical double layer (EDL) overlap effect and inner pore potential; thus the ions with smaller hydrated ionic radius can be adsorbed more easily.
A review of metal-organic framework-derived carbon electrode materials for capacitive deionization

Jia-ze Weng,Shi-yong Wang,Pei-xin Zhang,Chang-ping Li,Gang Wang

DOI: https://doi.org/10.1016/s1872-5805(21)60009-4

IF: 5.7

2021-02-01

New Carbon Materials

Abstract:Capacitive deionization (CDI), in which electrode materials play an important role, is considered a novel desalination technology because of its advantages of low energy consumption, low cost and low pollution. Porous electrode materials with a high accessible surface area, hydrophilic surfaces and excellent electrochemical performance have proved to be ideal. Carbons derived from metal-organic frameworks (MOFs) are most suitable for this purpose because of their controllable morphology and microstructure, suitable pore size distribution, and excellent electrical conductivity. The preparation and of MOF-derived carbon materials and their performance for the use as CDI electrode materials are reviewed. These include MOF-derived carbons, modified MOF-derived carbons, doped MOF-derived carbons and MOF-derived carbon composites with graphene, carbon nanofibers and carbon nanotubes. The advantages and challenges of these carbon electrode materials for CDI are summarized and future development is proposed.

materials science, multidisciplinary
Electrochemical capacitive desalination behavior of activated carbon fibers

Ming Wang,Zheng-Hong Huang,Lei Wang,Feiyu Kang

2010-01-01

Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.
Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Meng Zhang,Weiqing Kong

DOI: https://doi.org/10.1016/j.jelechem.2020.114703

IF: 4.598

2020-12-01

Journal of Electroanalytical Chemistry

Abstract:<p>Capacitive deionization (CDI) has attracted considerable interest as an energy-efficient and cost-effective approach for water desalination. The fundamental working principle of CDI relies on ion electrosorption on the surface of a pair of electrically charged electrodes. Therefore, the development of more efficient electrode materials with high salt adsorption capacity is at the heart of CDI technology, and has motivated considerable efforts over the past decade. In particular, various carbon materials, including conventional activated carbon and various forms of porous carbon and graphene, have been intensively investigated as the CDI electrode materials for their electrochemical stability and large surface area, which typically relies solely on ion absorption and the formation of Helmholtz electrical double layer. It has more recently been shown that significant improvements in salt adsorption capacity can be further achieved either by functionalization of carbon surface with redox-active groups, or by introducing electrochemically active transition metal oxides or conductive polymers into the carbon matrix. Herein, we briefly summarize the fundamental principle of CDI technology, and review the recent progress in the design and development of high performance CDI electrode materials. We will conclude with a brief perspective on the current challenges and future opportunities in CDI technology.</p>

chemistry, analytical,electrochemistry
Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Zhen Wang,Ming Gao,Jie Peng,Luwei Miao,Wenqing Chen,Tianqi Ao

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124596

IF: 8.2

2023-04-29

International Journal of Biological Macromolecules

Abstract:Capacitive deionization (CDI) using porous materials offers a sustainable solution for providing affordable freshwater, but the low salt adsorption rate of benchmark carbon materials significantly limit the practical implementation. Herein, we utilized carboxymethyl cellulose sodium (CMC) as the carbon skeleton to produce a composite carbon aerogel loaded with ZIF-8 (ZIF-8/CMC-CA). The presence of ZIF-8 nanoparticles improved the pore structure of the material and provides a certain pseudo capacitance by introducing N. Compared with ZIF-8 derived carbons (ZIF-8-C), the CMC provided a good three-dimensional structure for the dispersion of ZIF-8 nanoparticles, reduced the agglomeration of particles. Furthermore, numerous carboxyl and hydroxyl groups on CMC enhanced the hydrophilicity of materials. Due to the interconnected structure, ZIF-8/CMC-CA exhibited excellent conductivity, a high specific surface area, and offered suitable channels for the rapid entry and exit of ions. In a three-electrode system, the total specific capacitance of the ZIF-8/CMC-CA electrode was 357.14 F g −1 . The adsorption rate of ZIF-8/CMC-CA was 2.02 mg g −1 min −1 in a 500 mg L −1 NaCl solution. This study may provide new insight for modifying and fabricating electrode materials for practical CDI applications.

polymer science,biochemistry & molecular biology,chemistry, applied
Heteroatom-doped carbon materials for capacitive deionization

Ying TONG,Feiwen ZHAO,Lei JIAO,Guoping ZHAO,Sujuan ZHONG,Jia MA,Qingke ZHANG,Dong XU

DOI: https://doi.org/10.3969/j.issn.1001-9731.2017.08.001

2017-01-01

Abstract:In this review, various heteroatom-doped carbon materials including heteroatom-doped grapheme, heteroatom-doped porous carbon derived from biomass materials, heteroatom-doped porous carbon derived from metal-organic framework and other materials are presented.These porous carbon materials are used for CDI device.How to choose an appropriate material as CDI electrode is very important.Heteroatom doping can improve the electrical conductivity and wettability of porous carbon materials.Meanwhile, how to enhance the charge efficiency and electrosorption capacity of the electrodes is the focus of the further study.
Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Qiang Dong,Gang Wang,Tingting Wu,Senpei Peng,Jieshan Qiu

DOI: https://doi.org/10.1016/j.jcis.2014.12.065

2015-05-15

Abstract:Capacitive deionization (CDI) is an alternative, effective and environmentally friendly technology for desalination of brackish water. The performance of the CDI device is highly determined by the electrode materials. In this paper, a composite of carbon nanotubes (CNTs) embedded in activated carbon nanofiber (ACF) was prepared by a direct co-electrospinning way and subsequent CO2 activation. The introduction of CNTs can greatly improve the conductivity while the CO2-mediated activation can render the final product with high porosity. As such, the hybrid structure can provide an excellent storage space and pathways for ion adsorption and conduction. When evaluated as electrode materials for CDI, the as-prepared CNT/ACF composites with higher electrical conductivity and mesopore ratios exhibited higher electrosorption capacity and good regeneration performance in comparison with the pure ACF.
A Study of the Effect of Carbon Characteristics on Capacitive Deionization (CDI) Performance

Zhaolin Chen,Hongtao Zhang,Chunxu Wu,Litao Luo,Cuiping Wang,Shoubing Huang,Heng Xu

DOI: https://doi.org/10.1016/j.desal.2017.11.036

IF: 11.211

2018-01-01

Desalination

Abstract:In an attempt to improve the capacitive deionization (CDI) performance and develop an efficient CDI electrode material, the effect of carbon characteristics on CDI was investigated. Activated carbon (AC) and ordered mesoporous carbon (OMC) materials synthesized by template method were used for the electrode manufacture. The capacitive deionization performance of AC and OMC based electrodes was investigated and compared. We found that when the specific surface areas of AC materials increased from 712 to 1347 m(2)/g, the electrosorption capacities of AC electrodes increased slightly from 9.43 to 10.14 mg/g. The characteristics of OMC materials can be optimized by the adjustment of the mesoporous silica beads template proportion, resulting in a maximum average pore size of 11.35 nm and total pore volume of 2.101 cm(3)/g. The optimum electrosorption capacity obtained with OMC4 electrode was 10.83 mg/g, which was not only higher than that of AC electrodes, but obviously higher than the values of most carbon-based electrodes in other studies. In conclusion, these results provide important insights into the effect of carbon characteristics on capacitive deionization and suggest that OMC synthesized by template method could be a promising carbon material for the CDI electrode manufacture.
Carbon Materials for Chemical Capacitive Energy Storage

Yunpu Zhai,Yuqian Dou,Dongyuan Zhao,Pasquale F. Fulvio,Richard T. Mayes,Sheng Dai

DOI: https://doi.org/10.1002/adma.201100984

IF: 29.4

2011-09-26

Advanced Materials

Abstract:Carbon materials have attracted intense interests as electrode materials for electrochemical capacitors, because of their high surface area, electrical conductivity, chemical stability and low cost. Activated carbons produced by different activation processes from various precursors are the most widely used electrodes. Recently, with the rapid growth of nanotechnology, nanostructured electrode materials, such as carbon nanotubes and template-synthesized porous carbons have been developed. Their unique electrical properties and well controlled pore sizes and structures facilitate fast ion and electron transportation. In order to further improve the power and energy densities of the capacitors, carbon-based composites combining electrical double layer capacitors (EDLC)-capacitance and pseudo-capacitance have been explored. They show not only enhanced capacitance, but as well good cyclability. In this review, recent progresses on carbon-based electrode materials are summarized, including activated carbons, carbon nanotubes, and template-synthesized porous carbons, in particular mesoporous carbons. Their advantages and disadvantages as electrochemical capacitors are discussed. At the end of this review, the future trends of electrochemical capacitors with high energy and power are proposed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Moderately oxidized graphene–carbon nanotubes hybrid for high performance capacitive deionization

Helan Zhang,Peng Liang,Yanhong Bian,Yong Jiang,Xueliang Sun,Changyong Zhang,Xia Huang,Fei Wei

DOI: https://doi.org/10.1039/c6ra10088k

IF: 4.036

2016-01-01

RSC Advances

Abstract:Capacitive deionization (CDI) is an emerging technology offering a green and efficient route to obtain clean water. According to its basic working mechanism, the covalent bond attached three-dimensional graphene/carbon nanotubes hybrid (G-CNTs) can be considered a promising material for CDI performance. In this paper, we present a novel strategy to improve wettability through moderate oxidation treatment for G-CNTs-based CDI electrodes because the poor wettability of G-CNTs will limit electrosorption performance. The results showed that the activated G-CNTs-1 h exhibited good cycling stability performance and high electrosorption capacity of 8.45 mg g(-1) when the initial concentration of NaCl was 500 mg L-1, more than twice that of the pristine G-CNTs (3.95 mg g(-1)). This work may provide a new insight into the future pretreatment of graphene or carbon nanotube based CDI electrode materials.
Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Haiou Song,Yifan Wu,Shupeng Zhang,Wentao Li,Baijun Wang,Changming Wang,Juanjuan Gao,Aimin Li

DOI: https://doi.org/10.1016/j.electacta.2016.04.082

IF: 6.6

2016-01-01

Electrochimica Acta

Abstract:Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. (C) 2016 Elsevier Ltd. All rights reserved.
Carbon Materials for Water Desalination by Capacitive Deionization

Michio Inagaki,Zheng-hong Huang

DOI: https://doi.org/10.1016/s1872-5805(23)60736-x

IF: 10.9

2023-01-01

Carbon

Abstract:Recent developments on the capacitive deionization(CDI)technique for water desalination are reviewed with a focus on carbon as the electrode material.The capacity and rate of salt adsorption and charge efficiency of various types of CDI cells,i.e.flow-by,membrane,flow-through-electrode,and flowing electrode cells are compared.Various carbon electrode materials for capa-citor-type and battery-type cells are discussed.The flowing electrode cell with the short-circuit operation mode seems to be the most promising one for practical applications.
GO/auricularia-derived Hierarchical Porous Carbon Used for Capacitive Deionization with High Performance

Jin Feng,Zhiyu Yang,Shiyu Hou,Mingzhe Li,Ruitao Lv,Feiyu Kang,Zheng-Hong Huang

DOI: https://doi.org/10.1016/j.colsurfa.2018.03.049

IF: 5.518

2018-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:The hierarchical porous carbon materials coupled with graphene nanosheets were prepared by simple carbonizing hybrid of auricularia and graphene oxide with the following KOH activation. It is found that the porous carbon materials prepared via hydrothermal carbonization process possess a preferable pore structure compared with that prepared via calcining carbonization process. As such, the resultant porous carbon exhibits a high surface area of 1401m(2) g(-1) with a high proportion of mesoporosity (20.6%). More importantly, when used as electrode materials for capacitive deionization (CDI), such kind of porous carbon material shows a high electrosorption capacity of 7.74 mg g(-1).
Enhanced Capacitive Deionization of Hollow Mesoporous Carbon Spheres/MOFs Derived Nanocomposites by Interface-Coating and Space-Encapsulating Design

Yijian Tang,Yuxin Shi,Yichun Su,Shuai Cao,Jinliang Hu,Huijie Zhou,Yangyang Sun,Zheng Liu,Songtao Zhang,Huaiguo Xue,Huan Pang

DOI: https://doi.org/10.1002/advs.202403802

2024-08-14

Abstract:Exploring new carbon-based electrode materials is quite necessary for enhancing capacitive deionization (CDI). Here, hollow mesoporous carbon spheres (HMCSs)/metal-organic frameworks (MOFs) derived carbon materials (NC(M)/HMCSs and NC(M)@HMCSs) are successfully prepared by interface-coating and space-encapsulating design, respectively. The obtained NC(M)/HMCSs and NC(M)@HMCSs possess a hierarchical hollow nanoarchitecture with abundant nitrogen doping, high specific surface area, and abundant meso-/microporous pores. These merits are conducive to rapid ion diffusion and charge transfer during the adsorption process. Compared to NC(M)/HMCSs, NC(M)@HMCSs exhibit superior electrochemical performance due to their better utilization of the internal space of hollow carbon, forming an interconnected 3D framework. In addition, the introduction of Ni ions is more conducive to the synergistic effect between ZIF(M)-derived carbon and N-doped carbon shell compared with other ions (Mn, Co, Cu ions). The resultant Ni-1-800-based CDI device exhibits excellent salt adsorption capacity (SAC, 37.82 mg g-1) and good recyclability. This will provide a new direction for the MOF nanoparticle-driven assembly strategy and the application of hierarchical hollow carbon nanoarchitecture to CDI.
Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Wanni Zhang,Wenchao Xue,Kang Xiao,Chettiyappan Visvanathan,Jialing Tang,Lu Li

DOI: https://doi.org/10.1016/j.seppur.2023.123649

IF: 8.6

2023-03-29

Separation and Purification Technology

Abstract:Flow-electrode capacitive deionization (FCDI) is an emerging desalination technology for its high desalination efficiency and continuous operation. This study systematically investigated the feasibility of various representative carbon-based materials and their combinations as the flow-electrode with the primary focus on their desalination efficiency and energy efficiency in FCDI. Among individual carbon-based electrode materials, namely activated carbon (AC), carbon fiber (CF), carbon black (CB), multi-walled carbon nanotubes (MWCNTs), and graphene nanoplatelets (GNPs), the nano-scale materials obviously outperformed micron-scale materials. Whereas, the combinations of AC + MWCNTs/GNPs provided superior desalination performance than AC + CB while working as blended flow-electrodes in FCDIs due to the different spatial configurations of three nano-scale particles. Furthermore, CB was tested as the base material in combination with MWCNTs and GNPs respectively. Approximately 110–130% increments in maximum salt adsorption rate were obtained for both blended electrodes compared to individual CB electrodes. The highest SAR max of 1.59 ± 0.02 μg cm −2 s −1 was observed in FCDI driven by the CB + GNPs electrode at a content of 1.5/0.5 wt%. Supported by the results of field emission scanning electron microscopy (FESEM) and electrical impedance spectroscopy (EIS), the 2D spatial morphologies of GNPs were able to build similar but more stable "bridges" between base electrode particles (i.e., AC or CB) as CNTs. Its sheet-like structure avoided agglomeration problems and largely promoted the conductivity of the product flow-electrodes.

engineering, chemical
Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Ming Gao,Jiaxin Li,Zhen Wang,Zhiqian Yang,Yi Chen,Wenyang Deng,Wencui Liang,Tianqi Ao,Wenqing Chen

DOI: https://doi.org/10.1016/j.seppur.2023.125084

IF: 8.6

2023-09-19

Separation and Purification Technology

Abstract:Crafting an ideal capacitive deionization (CDI) cathode presents a significant challenge, owing to the myriad requisites it must fulfill. These entail a high specific capacitance, commendable conductivity, stability, and the counteraction of the shortcomings inherent in additive/binder electrodes. Realizing all these attributes from a single-component material, however, is a daunting task. In this investigation, we present our findings on the in-situ cultivation of ultrathin NiCo 2 O 4 nanoneedle arrays on freestanding electrospinning nitrogen-enriched carbon nanofibers devised to tackle these hurdles. The resultant material boasts remarkable features that not only alleviate tension triggered by phase transition but also accentuate electric conductivity. Electrochemical evaluations authenticate the effectiveness of structural modulation, reflected through a markedly augmented specific capacitance, superior stability, and diminished electrochemical resistance. Furthermore, the assembled pliable, asymmetric CDI cell incorporating electrospinning carbon nanofiber showcases superior desalination capabilities (38.86 mg g −1 at 1.2 V), a swift desalination rate (0.65 mg g −1 min −1 ), and improved cycle stability. This work finding contribute valuable interpretations towards proficiently designing and developing advanced CDI electrode materials capable of meeting the stringent requisites for high specific capacitance, good conductivity, and stability. It further propels progress towards industrialization, thereby expediting the realization of practical applications.

engineering, chemical
Electrospun Composites Made of Reduced Graphene Oxide and Activated Carbon Nanofibers for Capacitive Deionization

qiang dong,gang wang,bingqing qian,chao hu,yuwei wang,jieshan qiu

DOI: https://doi.org/10.1016/j.electacta.2014.06.067

IF: 6.6

2014-01-01

Electrochimica Acta

Abstract:Capacitive deionization (CDI) technology is an alternative technique to remove salt ions from salted and brackish water, of which the performance is mainly governed by the electrode materials. In the present study, the composites for CDI were produced by co-electrospinning the reduced graphene oxide (RGO) and activated carbon nanofiber (ACF), followed by CO2 activation. The morphology, mechanical property and conductivity of the as-made RGO/ACF composites were characterized, and their NaCl adsorption capacity was evaluated. In the electrospun RGO/ACF composites, the nanofibers function to immobilize graphene and to avoid the agglomeration of graphene, while the graphene helps to increase the conductivity as a conductive agent and to improve the pore width distribution. It has been found that the RGO/ACF-10 shows an excellent electrosorption capacity as high as 7.2mgg−1 at 400mg/L of initial salt concentration. Such an approach to fabrication of RGO/ACF composites may pave a new way to produce carbon-based electrode materials for CDI with high performance.
N-doped carbon nanosheets assembled microspheres for more effective capacitive deionization

Pengshuai Wang,Wenting Ma,Song Xue,Liang Wang,Yuan Chen,Yilei Wang

DOI: https://doi.org/10.1016/j.seppur.2021.119336

IF: 8.6

2021-12-01

Separation and Purification Technology

Abstract:The effect of electrode material's surface morphology on capacitive deionization (CDI) has been discussed here. For more effective CDI performance, the hierarchical carbon microspheres (HCMs) with vertically aligned nanosheets are designed to obtain the roughest surface. HCMs are derived from the polyimide precursor which is formed by polymerizing methyl ethylenedicarboxylic anhydride (PMDA) with ethylenediamine (EDA) directly without any template agents. Active HCMs (A-HCMs) exhibit a specific surface area of 1870.18 m2·g−1 and a capacitance of 228.18 F·g−1 in 1 M NaCl aqueous electrolyte after carbonization and KOH activation. When processed into CDI electrodes, the vertically aligned nanosheets in A-HCMs would create continuous spaces for ion diffusion, instead of the smooth surfaces reported for other electrode materials. The meso/micro pores in nanosheets still support a large electrical double layer (EDL) for ion storage. A-HCMs exhibit a NaCl capacity of 14.64 mg·g−1 at 1.0 V in the initial concentration of 400 mg·L−1. More than 50 stable deionization/regeneration cycles could be achieved. The A-HCMs were shown to have several benefits: carbon nanosheets with micro- and meso-pores that enhance SAC, N-doped carbon for lower electric resistance and better CE, and vertically aligned nanosheets that benefit ions diffusion. We have found that macromorphology is also an effective way to optimize CDI performance in addition to controlling pore's structure.

engineering, chemical
3D Porous Graphene with Ultrahigh Surface Area for Microscale Capacitive Deionization

Zhuo Li,Bo Song,Zhenkun Wu,Ziyin Lin,Yagang Yao,Kyoung-Sik Moon,C. P. Wong

DOI: https://doi.org/10.1016/j.nanoen.2014.11.018

IF: 17.6

2015-01-01

Nano Energy

Abstract:Capacitive deionization (CDI) is an emerging technology to supply deionized water as liquid coolant for the thermal management in microelectronics. Graphene has been demonstrated as a promising candidate for CDI electrode. However, the performance of current graphene-based CDI is far below expectation due to the limited specific surface area (SSA) and electrical conductivity of the chemically reduced graphene. Here we presented a KOH-activated graphene that has ultrahigh SSA of 3513m2/g and electrical conductivity of 104S/m. With improved materials properties, an ultrahigh electrosorption capacity of 11.86mg/g and a significant adsorption rate of 20min are achieved.

Frontiers of Carbon Materials As Capacitive Deionization Electrodes

Research progress on the application of carbon-based composites in capacitive deionization technology

Asymmetric Electrodes Constructed with PAN-Based Activated Carbon Fiber in Capacitive Deionization

A review of metal-organic framework-derived carbon electrode materials for capacitive deionization

Electrochemical capacitive desalination behavior of activated carbon fibers

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Heteroatom-doped carbon materials for capacitive deionization

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

A Study of the Effect of Carbon Characteristics on Capacitive Deionization (CDI) Performance

Carbon Materials for Chemical Capacitive Energy Storage

Moderately oxidized graphene–carbon nanotubes hybrid for high performance capacitive deionization

Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Carbon Materials for Water Desalination by Capacitive Deionization

GO/auricularia-derived Hierarchical Porous Carbon Used for Capacitive Deionization with High Performance

Enhanced Capacitive Deionization of Hollow Mesoporous Carbon Spheres/MOFs Derived Nanocomposites by Interface-Coating and Space-Encapsulating Design

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Electrospun Composites Made of Reduced Graphene Oxide and Activated Carbon Nanofibers for Capacitive Deionization

N-doped carbon nanosheets assembled microspheres for more effective capacitive deionization

3D Porous Graphene with Ultrahigh Surface Area for Microscale Capacitive Deionization