Abstract:Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. (C) 2016 Elsevier Ltd. All rights reserved.

3D Porous Graphene with Ultrahigh Surface Area for Microscale Capacitive Deionization

Ultrahigh Performance of Novel Capacitive Deionization Electrodes based on A Three-Dimensional Graphene Architecture with Nanopores

3D Graphene-supported N-doped Hierarchically Porous Carbon for Capacitive Deionization of Saline Water

Partially reduced holey graphene oxide for high performance capacitive deionization

3D interconnected porous graphene architecture as a high-performance capacitive deionization electrode

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

Bio-composite nanoarchitectonics for graphene tofu as useful source material for capacitive deionization

Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Large-surface-area porous monolith of graphene for electrochemical capacitive deionization

Moderately oxidized graphene–carbon nanotubes hybrid for high performance capacitive deionization

Hierarchical Hole-Enhanced 3D Graphene Assembly for Highly Efficient Capacitive Deionization

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

GO/auricularia-derived Hierarchical Porous Carbon Used for Capacitive Deionization with High Performance

Rational design and fabrication of graphene/carbon nanotubes hybrid sponge for high-performance capacitive deionization

Constructing a high-performance nitrogen-doped three-dimensional framework graphene material for efficient capacitive deionization

Three-dimensional network of graphene for electrochemical capacitors and capacitive deionization

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets

Enhanced Capacitive Deionization Exploiting Novel Functionalized Graphene Oxide Electrodes

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization