Abstract:Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. (C) 2016 Elsevier Ltd. All rights reserved.

Ultrahigh Performance of Novel Capacitive Deionization Electrodes based on A Three-Dimensional Graphene Architecture with Nanopores

3D interconnected porous graphene architecture as a high-performance capacitive deionization electrode

3D Porous Graphene with Ultrahigh Surface Area for Microscale Capacitive Deionization

3D Graphene-supported N-doped Hierarchically Porous Carbon for Capacitive Deionization of Saline Water

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets

Partially reduced holey graphene oxide for high performance capacitive deionization

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Hierarchical Hole-Enhanced 3D Graphene Assembly for Highly Efficient Capacitive Deionization

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Graphene-Carbon 2d Heterostructures With Hierarchically-Porous P,N-Doped Layered Architecture For Capacitive Deionization

Bio-composite nanoarchitectonics for graphene tofu as useful source material for capacitive deionization

3D printed electrodes for efficient membrane capacitive deionization

Moderately oxidized graphene–carbon nanotubes hybrid for high performance capacitive deionization

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Constructing a high-performance nitrogen-doped three-dimensional framework graphene material for efficient capacitive deionization

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Cu-based MOF-derived architecture with Cu/Cu2O nanospheres anchored on porous carbon nanosheets for efficient capacitive deionization