Abstract:Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. (C) 2016 Elsevier Ltd. All rights reserved.

GO/auricularia-derived Hierarchical Porous Carbon Used for Capacitive Deionization with High Performance

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Ultrahigh Content Boron and Nitrogen Codoped Hierarchically Porous Carbon Obtained from Biomass Byproduct Okara for Capacitive Deionization

3D Porous Graphene with Ultrahigh Surface Area for Microscale Capacitive Deionization

3D Graphene-supported N-doped Hierarchically Porous Carbon for Capacitive Deionization of Saline Water

Facile Synthesis of In Situ Graphitic-N Doped Porous Carbon Derived from Ginkgo Leaf for Fast Capacitive Deionization

Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Wrinkled hierarchical porous carbon spheres with interconnected multi-cavity for ultrahigh capacitive deionization

Hierarchical porous carbon derived from carboxylated coal-tar pitch for electrical double-layer capacitors

Hierarchical Porous Carbon Aerogel Derived from Sodium Alginate for High Performance Electrochemical Capacitor Electrode

Porous Biomass Carbon Coated with SiO2 as High Performance Electrodes for Capacitive Deionization

Controllable Preparation of a N-Doped Hierarchical Porous Carbon Framework Derived from ZIF-8 for Highly Efficient Capacitive Deionization

Hierarchical Porous Carbons Derived from Porous Biomass for High-Performance Capacitive Deionization

Pine-derived porous carbon for efficient capacitive deionization and the role of its hierarchical pore structure

Bio-composite nanoarchitectonics for graphene tofu as useful source material for capacitive deionization

Graphene Oxide-Embedded Porous Carbon Nanofiber Webs by Electrospinning for Capacitive Deionization

Pore structure and N/F bifunctional groups in hierarchical porous carbons via spontaneous silica etching for enhanced capacitive deionization performance

Oxygen-Rich Hierarchical Porous Carbon Derived from Artemia Cyst Shells with Superior Electrochemical Performance

Partially reduced holey graphene oxide for high performance capacitive deionization