Abstract:The use of electrochemical capacitors is greatly limited by their poor volumetric energy density, and the key for improving it is to develop porous yet compact carbon materials. In recent years, the densification of porous carbons by capillary forces during drying has been used as a main method to balance the density and porosity of porous carbons for high volumetric performance. But there are still deficiencies in fine tuning the pore structure, which limits the compatibility of porous carbons with high-voltage ionic liquids. We report a KI-assisted method to prepare graphene-based porous carbons with high density and high capacitance. During the synthesis of the carbons, graphene oxide was dispersed in KI solutions with concentrations of 12.5-37.5 mmol/mL followed by hydrothermal treatment at 180 °C for 6 h. The obtained hydrogels were dried in 0.01 MPa of air at 60 °C for 72 h. By this procedure, KI was loaded into a matrix of compact graphene and formed crystals to suppress over shrinkage of pores during drying to produce densification and pseudo-capacitance. Electrochemical characterization of the resulting materials indicated that the ion-accessible surface area and pseudo-capacitance of the porous carbons were increased. The KI/graphene composite with an optimum concentration of KI of 25 mmol/mL achieved both a high electrode density of 0.96 g cm -3 and a high volumetric capacitance of 115 F cm -3 (at 1 A g -1 ) in an ionic liquid electrolyte (1-alkyl-3-methylimidazolium tetrafluoroborate). A symmetric cell assembled using this material had a high volumetric energy density of 19.6 Wh L -1 .

Large-surface-area porous monolith of graphene for electrochemical capacitive deionization

3D Porous Graphene with Ultrahigh Surface Area for Microscale Capacitive Deionization

Fabrication of Mesoporous Graphene Electrodes with Enhanced Capacitive Deionization

Li-Ion Doped Graphene/Carbon Nanofiber Porous Architectures for Electrochemical Capacitive Desalination

One-step fabrication and capacitive behavior of electrochemical double layer capacitor electrodes using vertically-oriented graphene directly grown on metal

Electrosorption Capacitance of Nanostructured Carbon-Based Materials

Rational design and fabrication of graphene/carbon nanotubes hybrid sponge for high-performance capacitive deionization

Ultrahigh Performance of Novel Capacitive Deionization Electrodes based on A Three-Dimensional Graphene Architecture with Nanopores

Harnessing Holey MXene/Graphene Oxide Heterostructure to Maximize Ion Channels in Lamellar Film for High‐Performance Capacitive Deionization (Small 45/2024)

Large scale templated synthesis of single-layered graphene with a high electrical capacitance

3D Graphene-supported N-doped Hierarchically Porous Carbon for Capacitive Deionization of Saline Water

Constructing titanium carbide MXene/reduced graphene oxide superlattice heterostructure via electrostatic self-assembly for high-performance capacitive deionization

Bio-composite nanoarchitectonics for graphene tofu as useful source material for capacitive deionization

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

Fabrication of Graphene-Based Xerogels for Removal of Heavy Metal Ions and Capacitive Deionization

Decoration of graphene network with metal–organic frameworks for enhanced electrochemical capacitive behavior

Graphene with KI-modified pore structure and its electrochemical capacitors application

Enhanced Capacitive Deionization Exploiting Novel Functionalized Graphene Oxide Electrodes

Partially reduced holey graphene oxide for high performance capacitive deionization

Three-dimensional network of graphene for electrochemical capacitors and capacitive deionization

Nitrogen-Doped Graphene Composites As Efficient Electrodes with Enhanced Capacitive Deionization Performance