Abstract:It is extremely difficult to obtain high output power with silicon based processes, which presents one of the greatest challenges for realizing fully integrated transceivers, especially at millimeter-wave frequencies. For this reason, various power combining methods have been proposed to achieve higher power levels.In this paper, a novel power combining method suitable for millimeter-wave applications is presented. The power combining network is synthesized in package utilizing wafer level packaging technology, with an array of power sources of moderate output power capability assumed to be distributed on chip, which means applying further combining in addition to existing on-chip power combining scheme for potentially even higher output power is possible.The power combining network is composed of more basic power combining units, each consisting of one substrate integrated waveguide (SIW) resonator coupling four lambda/4 standing-wave resonators, which can be synthesized using two quarter-wavelength vertical vias with one end open and the other end shorted. For power combining purpose, the open end of each lambda/4 resonator is connected to the differential output of one on-chip power source, while the shorted end is realized using one of the two metal plates of the SIW resonator. The coupling between the SIW resonator and lambda/4 resonators is through slotting on the metal plate to allow magnetic leakage so that oscillation in lambda/4 resonators will excite the SIW resonator to oscillate. As the quality factor of the SIW resonator is much larger than those of lambda/4 resonators, energy is mainly confined in the cavity of the SIW resonator so that power combing is achieved.Example design for 60 GHz application is detailed in the paper with simulation results using commercial CST software showing the effectiveness of the power combining method.

A Study on MMIC Millimeter Wave Frequency Multipliers

Millimeter wave and sub-millimeter wave circuits for integrated system-on-a-chip

Novel Millimeter-Wave Power Combining Utilizing Wafer Level Packaging Technology

An Ultra Broadband DC-40GHz 4-Bit GaAs Phemt MMIC Digital Attenuator

Fully Differential mm / sub-mm Wave CMOS Amplifiers

mm-Wave Power-Combining Architectures: Current Combining

Study of Microwave PIN Diode Frequency Multiplier

On-Chip Impedance-Optimized Microstrip Transmission Line For Multi-Band And Ultra-Wide-Band Microwave Applications

Design of a Microstrip Fourth Frequency-Multiplier at Ka-Band

Millimeterwave Monolithic Integrated Mixer

Millimeter-Wave Frequency Synthesizers

CMOS Multi-Channel Chips

A 22.4-to-40.6-ghz Multi-Ratio Injection-Locked Frequency Multiplier with 57.7-Dbc Harmonic Rejection

Design and Realization of Microwave Frequency Multiplier Based on Field Emission From Carbon Nanotubes Cold-Cathode

Progress in Monolithic Integrated Microwave/RF Power Amplifier

A 276–312-Ghz (×12) Frequency Multiplier Chain with Milliwatt Level Output Power in 65-Nm CMOS Technology

30 GHz Monolithically Integrated Frequency Multiplier Based on GaN Planar Schottky Barrier Diode

Design and Implementation of a Millimeter Wave Monolithic Integrated Mixer

A Single-Path Reconfigurable ×2/×3 Frequency Multiplier for 5G NR Application

CMOS Circuit Techniques for Mm-Wave Communications

A Single-Path Reconfigurable x2/ x3 Frequency Multiplier For 5G NR Application