Abstract:It is extremely difficult to obtain high output power with silicon based processes, which presents one of the greatest challenges for realizing fully integrated transceivers, especially at millimeter-wave frequencies. For this reason, various power combining methods have been proposed to achieve higher power levels.In this paper, a novel power combining method suitable for millimeter-wave applications is presented. The power combining network is synthesized in package utilizing wafer level packaging technology, with an array of power sources of moderate output power capability assumed to be distributed on chip, which means applying further combining in addition to existing on-chip power combining scheme for potentially even higher output power is possible.The power combining network is composed of more basic power combining units, each consisting of one substrate integrated waveguide (SIW) resonator coupling four lambda/4 standing-wave resonators, which can be synthesized using two quarter-wavelength vertical vias with one end open and the other end shorted. For power combining purpose, the open end of each lambda/4 resonator is connected to the differential output of one on-chip power source, while the shorted end is realized using one of the two metal plates of the SIW resonator. The coupling between the SIW resonator and lambda/4 resonators is through slotting on the metal plate to allow magnetic leakage so that oscillation in lambda/4 resonators will excite the SIW resonator to oscillate. As the quality factor of the SIW resonator is much larger than those of lambda/4 resonators, energy is mainly confined in the cavity of the SIW resonator so that power combing is achieved.Example design for 60 GHz application is detailed in the paper with simulation results using commercial CST software showing the effectiveness of the power combining method.

330 GHz and 165GHz two bands output in one stage multiplier based on 4-octave CSMRs LPF

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

An Ultra Broadband Passive Vector Modulator Phase Shifter

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

Novel Millimeter-Wave Power Combining Utilizing Wafer Level Packaging Technology

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

A 232GHz Frequency Multiplier Chain(×4) in 65-nm CMOS with Harmonic Rejection Ratio of 40dBc

A High-Precision Ultra-Broadband Quadrature Generation at Millimeter-Wave Frequencies

A 276–312-Ghz (×12) Frequency Multiplier Chain with Milliwatt Level Output Power in 65-Nm CMOS Technology

An X-Band Quadruple Frequency Multiplier in 65-Nm CMOS Process

A CMOS W-band ×4 frequency multiplier with cascading push-pull frequency doublers

A 22.4-to-40.6-ghz Multi-Ratio Injection-Locked Frequency Multiplier with 57.7-Dbc Harmonic Rejection

A Monolithic Dual-Band 77/94 GHz Transceiver Front-End with Shared Frequency Multiplier

A Scheme for Generating Millimeter Wave Signals through 32-Tupling Frequency Multiplication without Filtering Using Eight Mach-Zehnder Modulators

24.3 A 200-to-350ghz SiGe BiCMOS Frequency Doubler with Slotline-Based Mode-Decoupling Harmonic-Tuning Technique Achieving 1.1-to-4.7dbm Output Power

W-band X8 Frequency Multiplier in 65?nm CMOS with 25% Bandwidth and 4.63?dbm Output Power

A 91.9-113.2 GHz Compact Frequency Tripler with 44.6 dBc Peak Fundamental Harmonic-Rejection-Ratio Using Embedded Notch-filters and Area-Efficient Matching Network in 65 nm CMOS

220 GHz Multi Circuit Integrated Front End Based on Solid-State Circuits for High Speed Communication System

A 170‐ to 260‐GHz Full‐Band Frequency Doubler Realized by Impedance Compression Matching Technique

A Single-Path Reconfigurable ×2/×3 Frequency Multiplier for 5G NR Application

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS