Abstract:Organic coatings are widely used to protect metals from corrosion in high-temperature marine environments. Compared with inorganic or metal coatings, organic coatings exhibit favorable properties, such as a reasonable cost, adequate flexibility, and easy fabrication. However, most organic coatings are limited to relatively short protection times and thus fail to meet the increasing demands for industrial applications. In this paper, graphene oxide (GO) was added to cyanate ester (CE) coatings as a corrosion inhibitive filler. Electrochemical analysis shows that a 3 wt % GO/CE coating has favorable corrosion protection properties with a low-frequency resistance higher than 106 Ω cm2 and a corrosion rate of 632.9 × 10–6 mm per year after 1320 h of immersion in a high-temperature marine environment. Top-view and cross-sectional SEM images identify the electrochemical results. Furthermore, chemical analyses by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy demonstrate that hydroxyl groups of GO can react with cyanate groups, and therefore, a robust cross-linked structure was formed in the GO/CE coating. The synergistic effect of the physical shielding of GO and the robust cross-linked structure makes the GO/CE coating a promising choice for corrosion protection of steel in high-temperature marine environments. Our study also illustrates a novel method for preparing other chemically cross-linked composite coatings.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02531?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02531</a>.Potentiodynamic polarization curves of different coatings; low-frequency impedance modulus at 0.01 Hz and breakpoint frequency of all coatings; photo digital images of different CE or GO/CE-coated specimens before and after immersion in 3.5 wt % NaCl solutions; surface morphology by SEM of different coatings; contact angle of pristine CE coating, 1.5 wt % GO/CE coating, and 3 wt % GO/CE coating; bode modulus and phase angle diagrams of 0.75 wt % GO/CE coatings on Q235 steel immersed in 3.5 wt % NaCl solution from 216 to 1320 h; bode modulus and phase angle diagrams of 3 and 5 wt % GO/CE coatings on Q235 steel immersed in 3.5 wt % NaCl solution for 48, 96, 144, and 216 h, respectively; low-frequency impedance modulus at 0.01 Hz of 3 and 5 wt % GO/CE coatings with different immersion times; adhesions of six different coatings before and after immersion in 3.5 wt % NaCl solutions for 216 h; heating temperature and corresponding heating time during the whole curing process; polarization parameters of different coatings; and O2 gas permeability of pristine CE and 3 wt % GO/CE composite membranes (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02531/suppl_file/an0c02531_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synergistic Effect of Graphene Oxide and Cathodic Protection to Enhance the Long-Term Protective Performance of Organic Coatings

Effect of cyanate ester and graphene oxide as modifiers on corrosion protection performance of epoxy composite coating in sulfuric acid solution

Corrosion-Resistant Cross-Linked Cyanate Ester Coatings Doped by Graphene Oxide for Use in High-Temperature Marine Environments

In-situ crosslinking reaction of graphene oxide & waterborne epoxy resin to construct continuous phase anticorrosive coating

A long-term anti-corrosion and cathodic delamination resistant epoxy coating based on COF grafted GO nanofillers

Enhancing epoxy coating corrosion resistance with a novel MoS2-modified polydopamine functionalized graphene oxide nanocomposite

pH-Responsive Graphene Oxide-Based 2D/3D Composite for Enhancing Anti-Corrosion Properties of Epoxy Coating

A Novel Cerium Organic Network Modified Graphene Oxide Prepared Multifunctional Waterborne Epoxy-Based Coating with Excellent Mechanical and Passive/active Anti-Corrosion Properties

Synergistic enhancement of polyvinylpyrrolidone‐modified TiO2 and graphene oxide on the corrosion resistance of waterborne epoxy

Nano-SiO2 and Silane Coupling Agent Co-Decorated Graphene Oxides with Enhanced Anti-Corrosion Performance of Epoxy Composite Coatings

Preparation of polyvinylpyrrolidone/graphene oxide/epoxy resin composite coatings and the study on their anticorrosion performance

Experimental and simulation investigation on hydrophobicity and corrosion resistance of graphene oxide reinforced composite coating

Preparation and Anticorrosive Performance of Waterborne Epoxy Resin Composite Coating with Amino-Modified Graphene Oxide

Preparation and Characterization of Graphene Oxide/Carbon Nanotube/Polyaniline Composite and Conductive and Anticorrosive Properties of Its Waterborne Epoxy Composite Coatings

The Synergistic Effect of Graphene Oxide in Epoxy Resin on Photocured Coating Films with Anticorrosion and Antibacterial Properties

Preparation and Performance Studies of Modified Graphene Oxide/polyaniline Composite Anticorrosive Coatings

Phytic Acid Intercalated Graphene Oxide for Anticorrosive Reinforcement of Waterborne Epoxy Resin Coating

Development of an epoxy resin-based anticorrosive coating enhanced by monolayer amino-modified graphene oxide

The synergistic effect of polyvinyl alcohol and graphene oxide on the corrosion resistance of waterborne coatings

Cathodic electrophoretic deposition (EPD) of phenylenediamine-modified graphene oxide (GO) for anti-corrosion protection of metal surfaces

Long-term corrosion protection of Q235 steel by graphene oxide composite coating