Abstract:Organic coatings are widely used to protect metals from corrosion in high-temperature marine environments. Compared with inorganic or metal coatings, organic coatings exhibit favorable properties, such as a reasonable cost, adequate flexibility, and easy fabrication. However, most organic coatings are limited to relatively short protection times and thus fail to meet the increasing demands for industrial applications. In this paper, graphene oxide (GO) was added to cyanate ester (CE) coatings as a corrosion inhibitive filler. Electrochemical analysis shows that a 3 wt % GO/CE coating has favorable corrosion protection properties with a low-frequency resistance higher than 106 Ω cm2 and a corrosion rate of 632.9 × 10–6 mm per year after 1320 h of immersion in a high-temperature marine environment. Top-view and cross-sectional SEM images identify the electrochemical results. Furthermore, chemical analyses by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy demonstrate that hydroxyl groups of GO can react with cyanate groups, and therefore, a robust cross-linked structure was formed in the GO/CE coating. The synergistic effect of the physical shielding of GO and the robust cross-linked structure makes the GO/CE coating a promising choice for corrosion protection of steel in high-temperature marine environments. Our study also illustrates a novel method for preparing other chemically cross-linked composite coatings.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02531?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02531</a>.Potentiodynamic polarization curves of different coatings; low-frequency impedance modulus at 0.01 Hz and breakpoint frequency of all coatings; photo digital images of different CE or GO/CE-coated specimens before and after immersion in 3.5 wt % NaCl solutions; surface morphology by SEM of different coatings; contact angle of pristine CE coating, 1.5 wt % GO/CE coating, and 3 wt % GO/CE coating; bode modulus and phase angle diagrams of 0.75 wt % GO/CE coatings on Q235 steel immersed in 3.5 wt % NaCl solution from 216 to 1320 h; bode modulus and phase angle diagrams of 3 and 5 wt % GO/CE coatings on Q235 steel immersed in 3.5 wt % NaCl solution for 48, 96, 144, and 216 h, respectively; low-frequency impedance modulus at 0.01 Hz of 3 and 5 wt % GO/CE coatings with different immersion times; adhesions of six different coatings before and after immersion in 3.5 wt % NaCl solutions for 216 h; heating temperature and corresponding heating time during the whole curing process; polarization parameters of different coatings; and O2 gas permeability of pristine CE and 3 wt % GO/CE composite membranes (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02531/suppl_file/an0c02531_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A long-term anti-corrosion and cathodic delamination resistant epoxy coating based on COF grafted GO nanofillers

Hybrid epoxy-SiO2/GO nanosheets anti-corrosive coating for aeronautic aluminum Al6061-T5

Preparation and Anticorrosive Performance of Waterborne Epoxy Resin Composite Coating with Amino-Modified Graphene Oxide

Effect of covalent organic framework modified graphene oxide on anticorrosion and self-healing properties of epoxy resin coatings

Anti-corrosion coatings with active and passive protective performances based on v-COF/GO nanocontainers

A Novel Cerium Organic Network Modified Graphene Oxide Prepared Multifunctional Waterborne Epoxy-Based Coating with Excellent Mechanical and Passive/active Anti-Corrosion Properties

Graphene oxide–cerium oxide hybrids for enhancement of mechanical properties and corrosion resistance of epoxy coatings

“Labyrinthine structure” anticorrosive water-based composite coatings

Nano-SiO2 and Silane Coupling Agent Co-Decorated Graphene Oxides with Enhanced Anti-Corrosion Performance of Epoxy Composite Coatings

Development of an epoxy resin-based anticorrosive coating enhanced by monolayer amino-modified graphene oxide

Preparation and anticorrosion properties of GO‐Ce‐MOF nanocomposite coatings

Corrosion-Resistant Cross-Linked Cyanate Ester Coatings Doped by Graphene Oxide for Use in High-Temperature Marine Environments

Preparation of Superhydrophobic Materials and Establishment of Anticorrosive Coatings on the Tinplate Substrate by Alkylation of Graphene Oxide

Amino-Modified Graphene Oxide from Kish Graphite for Enhancing Corrosion Resistance of Waterborne Epoxy Coatings

Modified graphene oxide/waterborne epoxy composite coating with enhanced corrosion resistance

In-situ crosslinking reaction of graphene oxide & waterborne epoxy resin to construct continuous phase anticorrosive coating

A novel epoxy resin composite coating containing polyaniline modified GO with triple anti-corrosion effects of barrier, passivation and corrosion inhibition

A Micro-Nano Structure Formed by SiC/Graphene Oxide Self-Assembly Improves the Wear Resistance and Corrosion Resistance of an Epoxy-Based Composite Coating

pH-Responsive Graphene Oxide-Based 2D/3D Composite for Enhancing Anti-Corrosion Properties of Epoxy Coating

An epoxy-modified polyurethane composite coating with repetitive self-healing function for anti-cavitation, anticorrosion, and antifouling applications

Engineering the interface in graphene oxide/epoxy composites using bio-based epoxy-graphene oxide nanomaterial to achieve superior anticorrosion performance