Abstract:The present spotlight article addresses the challenges associated with metal oxide dielectric thin films deposited from liquid-phase precursors, which are often deemed inferior in thin film quality; suboptimal film quality adversely impacts the performance of electronic devices, particularly thin film transistors (TFTs). The traditional spin-casting method contributes to porous film masses due to the evaporation of solvent, and thermal annealing results in rough interfaces. Also, the presence of a high concentration of oxygen vacancies introduces traps, leading to hysteresis. To overcome these, the present article explores various film treatment methodologies, including Ar/O2 plasma treatment, the use of high-oxygen affinity dopants, and spray deposition of prepurified solution precursors. These treatments significantly improved film characteristics and TFT performance. Aluminum-doped zirconium oxide (ZAO) dielectrics treated with Ar/O2 plasma showed enhanced density (4.16 g/cm3). ZAO/amorphous indium gallium zinc oxide TFTs exhibited hysteresis-free characteristics with a field effect mobility (μ) of >15 cm2/V-s and an on:off (I ON:I OFF) switching ratio of 108. Using purified precursors for depositing dielectric ZrO x , along with amorphous indium gallium zinc oxide, resulted in μ and I ON:I OFF values exceeding 15 cm2/V-s and 109, respectively. Additionally, incorporating substitutional dopants such as hafnium in ZrO x improved TFT performance. TFTs composed of ZrO x and lanthanum zinc oxide demonstrated a μ of 22.2 cm2/V-s and I ON:I OFF of 108. These performance parameters were observed across a variety of devices and demonstrated stability. These enhanced performance parameters are attributed to improved film quality, including reduced roughness and defect-traps, facilitating seamless electrical conduction at the interface.

Chemical Vapor Deposition of Zr x Ti 1-x O and Hf x Ti 1-x O Thin Films Using the Composite Anhydrous Nitrate Precursors

Chemical vapor deposition of ZrxTi1-xO and Hf xTi1-xO thin films using the composite anhydrous nitrate precursors

Chemical Vapor Deposition of ZrxTi1-xO and HfxTi1-xO Thin Films Using the Composite Anhydrous Nitrate Precursors

Chemical vapor deposition of ZrxTi1−xO2 and HfxTi1−xO2 thin films using the composite anhydrous nitrate precursors

CVD of Zr0.65Ti0.35O2 Thin Films Using a Single‐Source Precursor of Novel Anhydrous Mixed‐Metal Nitrates

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Zno-based Thin Films Synthesized by Atmospheric Pressure Mist Chemical Vapor Deposition

Chemical Vapor Deposition Of Zrxhf1-Xo2 Thin Films Using Anhydrous Mixed-Metal Nitrates Precursors

Chemical Vapor Deposition of High-K Oxide Films Using Novel Anhydrous Mental Nitrates As Precursors

Properties of Hf0.7Zr0.3O2 thin films chemical vapor deposited using a single-source precursor of anhydrous HfxZr1−x(NO34 precursors

Hf xZr 1-xO 2 films chemical vapor deposited from a single source precursor of anhydrous Hf xZr 1-x(NO 3) 4

Stabilizing the Ferroelectric Phase of Hf_{0.5}Zr_{0.5}O_{2} Thin Films by Charge Transfer.

Stabilizing the Ferroelectric Phase of Hf 0.5 Zr 0.5 O 2 Thin Films by Charge Transfer

Amidoxime-Containing Zr and Hf Atomic Layer Deposition Precursors for Metal Oxide Thin Films

Exploring the role of TiN electrodes in the formation of ferroelectric HfxZr1-xO2 thin films through transmission electron microscopy

Sub-0.5 nm equivalent oxide thickness scaling for Si-doped Zr1-xHfxO2 thin film without using noble metal electrode

Oxygen Vacancy Modulation with TiO₂ Stack Interface Engineering for Ferroelectric Hf0.5Zr0.5O₂ Thin Films

Solution processed zirconium oxide dielectric thin films for electronic applications

Advancements in Metal Oxide Thin Film Quality in Solution-Processed High-κ Dielectrics for High-Performance Transistors

Solution-processed zinc oxide thin films and top-gate thin film transistors

Structure and optical properties of Zr<sub>x</sub>Hf<sub>1-x</sub>O<sub>2</sub> films deposited by pulsed laser co-ablation of Zr and Hf targets with the assistance of oxygen plasma