Abstract:TiO2-doped HfO2 gate dielectric thin films have been deposited on Si(100) substrates by RF sputtering. The component, morphology, structure, optical and interfacial properties of Hf-1 xTixO2 films related to TiO2 concentration are systematically investigated by atomic force microscope (AFM), X-ray diffraction (XRD), spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and Fourier transformation infrared (FTIR). By employing Cauchy-Urbach model, the optical constants, such as refractive index (n), extinction coefficient (k), absorption coefficient (alpha), and optical band gap (E-g) have been determined precisely. Measurements from XRD have confirmed that TiO2 incorporating into HfO2 films leads to the increase of the crystallization temperature of HfO2 films with increasing the TiO2 concentration. SE analyses have indicated that reduction in band gap and refractive index has been observed with increasing the TiO2 component in Hf-1 xTixO2 films. The increase in Urbach parameter E-U with the increase of TiO2 concentration also suggests the rise in disorder for Hf-1 xTixO2 films. FTIR measurements for Hf-1 xTixO2/Si gate stack indicate the existence of the interfacial layer regardless of the TiO2 concentration. For the 9% TiO2-doped HfO2 samples, the shift in FTIR characteristic peak suggests the formation of the silicate layer, which leads to the suppressed interfacial layer growth during deposition. As a result, it can be conclude that the TiO2 component in Hf-1 xTixO2 films should be controlled precisely to guarantee interfacial properties of Hf-1 xTixO2/Si gate stacks. (C) 2014 Elsevier B.V. All rights reserved.

Chemical vapor deposition of ZrxTi1-xO and Hf xTi1-xO thin films using the composite anhydrous nitrate precursors

Chemical Vapor Deposition of ZrxTi1-xO and HfxTi1-xO Thin Films Using the Composite Anhydrous Nitrate Precursors

Chemical vapor deposition of ZrxTi1−xO2 and HfxTi1−xO2 thin films using the composite anhydrous nitrate precursors

Chemical Vapor Deposition of Zr x Ti 1-x O and Hf x Ti 1-x O Thin Films Using the Composite Anhydrous Nitrate Precursors

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Chemical Vapor Deposition Of Zrxhf1-Xo2 Thin Films Using Anhydrous Mixed-Metal Nitrates Precursors

CVD of Zr0.65Ti0.35O2 Thin Films Using a Single‐Source Precursor of Novel Anhydrous Mixed‐Metal Nitrates

Properties of Hf0.7Zr0.3O2 thin films chemical vapor deposited using a single-source precursor of anhydrous HfxZr1−x(NO34 precursors

Hf xZr 1-xO 2 films chemical vapor deposited from a single source precursor of anhydrous Hf xZr 1-x(NO 3) 4

Interface Optimization and Band Alignments of HfTiO/InGaAs Gate Stacks by Metalorganic Chemical Vapor Deposition of AlON Passivation Layer

Chemical Vapor Deposition of High-K Oxide Films Using Novel Anhydrous Mental Nitrates As Precursors

Annealing Temperature Dependent Microstructure and Optical Properties of HfxTi1-xO2 Thin Films

Zno-based Thin Films Synthesized by Atmospheric Pressure Mist Chemical Vapor Deposition

Microstructure, Optical Properties, and Optical Resonators of Hf1-Xtixo2 Amorphous Thin Films

Deposition of ZrO2 and HfO2 thin films by liquid injection MOCVD and ALD using ansa-metallocene zirconium and hafnium precursors

Stabilizing the Ferroelectric Phase of Hf 0.5 Zr 0.5 O 2 Thin Films by Charge Transfer

Stabilizing the Ferroelectric Phase of Hf_{0.5}Zr_{0.5}O_{2} Thin Films by Charge Transfer.

Solution-processed hafnium oxide dielectric thin films for thin-film transistors applications

Sub-0.5 nm equivalent oxide thickness scaling for Si-doped Zr1-xHfxO2 thin film without using noble metal electrode

Exploring the role of TiN electrodes in the formation of ferroelectric HfxZr1-xO2 thin films through transmission electron microscopy

Composition-dependent structure and bandgaps in Hf x Zr1− x O2 thin films