Abstract:High-speed ADCs are key blocks for ADC-based serial links [1]. The SAR ADC is credited for its high energy efficiency while speedup is a challenge. One limiting factor to the SAR ADC speed is metastability. Traditional solutions have to lengthen the time or speed up the comparator for metastability tolerance, leading to a trade-off between speed and power consumption. A better way to solve metastability is by monitoring the comparison time of the comparator <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(\mathrm{t}_{\text{comp}})$</tex> and correcting codes. Prior research [2] extracts an additional bit of code from metastability by detecting <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> . However, since the <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{t}_{\text{comp}}$</tex> is sensitive to the input common-mode voltage (VCM), VCM-based switching is a must to ensure the accuracy of the obtained 1-bit code, which limits the speed of [2] to 700MS/s with 6b resolution. This work acquires two-bit codes from metastability and further accelerates the conversion. An on-chip self-tuning delay is adopted to ensure the accuracy of the extra 2 bits against PVT changes. This work also employs a bi-directional switching logic to speed up conversion and a proper comparator structure to minimize the impact of VCM changes. Thanks to the technique mentioned above, this work achieves 47. 2dB SNDR at 1GSs} with a Nyquist input. The 8b SAR ADC consumes 4. 15mW and 0.0032mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> including on-chip self-tuning delay, leading to a Walden FoM of 22.23fJ/conv.-step.

A 400-Ms/s 12-Bit Voltage-Time Hybrid ADC with a Ping-Pong SAR TDC for Speed Enhancement.

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 12-Bit 250-Ms/s Voltage-Time Domain Hybrid ADC

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 12-bit 100-MSps pipelined-SAR ADC with a time-interleaved second-stage

A 12-Bit 1.5-Gs/s Single-Channel Pipelined SAR ADC with a Pipelined Residue Amplification Stage

An 8b 1GS/s SAR ADC with Metastability-Based Resolution/Speed Enhancement and Self-Tuning Delay Achieving 47.2dB SNDR at Nyquist Input.

A 12-bit High-Speed Time-Interleaved Pipelined Asynchronous Successive-Approximation ADC in 22-nm FDSOI CMOS

A 10b 250ms/s SAR ADC with Speed-Enhanced SAR Logic and Free Time More Than a Half of Sampling Period

A Low-Power 12-Bit 2gs/S Time-Interleaved Pipelined-Sar Adc In 28nm Cmos Process

A 4-Gs/s 6-Bit Single-Channel TDC-Assisted Hybrid ADC Featuring Power Supply Variation Adaptation for Inter-Stage Gain Error

A 5-GS/s 10-b 76-mW Time-Interleaved SAR ADC in 28 nm CMOS

A 300ms/s 57.6db SNDR Single-Channel SAR ADC with Accelerated SAR Logic.

A 12-bit 1.1GS/s Pipelined-SAR ADC With Adaptive Inter-Stage Redundancy in 28 nm CMOS

A 73db SNDR 20ms/s 1.28mw SAR-TDC Using Hybrid Two-Step Quantization.

A 13-Bit 160ms/s Pipelined Subranging-Sar ADC with Low-Offset Dynamic Comparator.

A 500-MS/s 9-Bit Time-Domain ADC Using a Nonbinary Successive Approximation TDC