Abstract:A two-step electrochemical anodization method was used to fabricate the TiO2 nanotube electrode,and Cu2O was deposited onto the annealed TiO2 nanotubes arrays via the galvanostatic electrodeposition method.Scanning electron microscopy (SEM),X-ray diffraction (XRD),X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectra (UV-vis DRS) were used to identify the characterization of the samples.The SEM results show that TiO2 nanotubes align vertically on the Ti substrate with an average tube diameter of 50 nm and a tube length of approximately 1 μm.The Cu2O nanoparticles are uniformly deposited on the TiO2 nanotubes arrays.The XRD results show that the structures of TiO2 and Cu2O are anatase and cubic,respectively.XPS results reveal the existence states of Cu and Ti in Cu2O/TiO2 are Cu1+ and Ti2+,correspondingly.UV-vis DRS results reveal the deposited Cu2O expands the ability of light absorption to the visible area.Photoelectrochemical (PEC) tests reveal that fabricated Cu2O/TiO2 shows better activity and the photocurrent density of the Cu2O/TiO2 is more than 2 times compared with those of the TiO2 nanotubes.The photoeonversion efficiency of the Cu2O/TiO2 reaches0.41％ at 0.735 V (vs.RHE) when the deposition amount of Cu2O is 5.18 × 10-7 mol.The Cu2O/TiO2 was annealed to enhance the performance.By annealing at 373 K for 0.5 h in air,the photoconversion efficiency of the annealed sample is up to 0.65％ (0.759 V vs.RHE).The stability of the CT-0.1 and CT-0.1-373 was investigated at last.The test of continuous linear sweep voltammetry (LSV)of 100 times reveal that CT-0.1-373 remains a photoconversion efficiency of 0.64％ (0.762 V vs.RHE)after 100 scans,while CT-0.1 remains a photoconversion efficiency of 0.38％,which reveals annealing at low temperatures not only improves the activity but also enhances the stability of the Cu2O/TiO2.

Synthesis of Cu,N-Doped TiO<sub>2</sub> Nanotube and Study on Photoelectric Properties

Synthesis of Cu,N-doped TiO2 Nanotube by a Novel Magnetron Sputtering Method and Its Photoelectric Property

Preparation and Characterization of Cu-doped TiO2 Nanotube Array Films

Research on Cu-doped TiO_2 Nanotube Arrays

Enhanced Optical Absorption and Photocatalytic Activity of Cu/N-Codoped Tio2 Nanocrystals

Preparation and Photocatalysis Property of N Doped TiO_2 Nanotube

Preparation and Photocatalytic Property of Cu2o-Tio2 Composite Nanotube Arrays Film by the Anodic Oxidation

Photoelectrochemical Properties of N Doped Black TiO2 Nanotube Arrays

Photoelectrochemical Property and Photocatalytic Activity of N-doped TiO2 Nanotube Arrays

Cu2O-Decorated TiO2 Nanotubes with Enhanced Optical Properties and Photocatalytic Performance

Electrochemical Preparation and Photoelectric Properties of Cu2o-Loaded Tio2 Nanotube Arrays

Synthesis, Characterization and Photocatalytic Activity of Visible-light-driven N-P-codoped TiO_2 Nanotubes

N-doped TiO2 Nanotube Array Photoelectrode for Visible-Light-induced Photoelectrochemical and Photoelectrocatalytic Activities

Synthesis and Characterization of the Optical Properties of Pt-TiO2Nanotubes

Preparation and Characterization of N-Doped TiO_2 Nanotube

Preparation and Photoelectrochemical Characterization of p-Cu2O/n-TiO2 Nanotubes

Nitrogen-Doped TiO<sub><b>2</b></sub>Nanotube Arrays with Enhanced Photoelectrochemical Property

Fabrication and Photoelectrochemical Properties of CuO/TiO2 Heterojunction Nanotubes Array Film

Photoelectrical properties of nitrogen doped TiO 2 nanotubes by anodic oxidation of N + implanted Ti foils

Synthesis and Photocatalytic Performance of Nitrogen and Nickel Codoped TiO2 Nanotubes

Enhanced Photoelectrochemical Properties of TiO2 Nanotube Arrays Sensitized with Energy-Band Tunable (cu2sn)x/3zn1−xs Nanoparticles