Abstract:Nickel oxide (NiOx) has significant cost and stability advantages over poly[bis (4-phenyl)(2,4,6-trimethyl phenyl)amine] (PTAA) for inverted p-i-n perovskite solar cells (PSCs), but the poor NiOx/perovskite contact stemming from some reactive species at the interface led to suboptimal device performance. To solve this problem, we take a multiple donor molecule approach, using 3,3'-(4,8-bis(hexylthio)benzo[1,2-b:4,5-b']dithiophene-2,6-diyl)bis(10-(6-bromohexyl)-10H-phenoxazine) (BDT-POZ) as an example, to modify the NiOx/perovskite interface. The primary goal was to reduce the under-coordinated Ni >= 3+ cations via electron transfer from the donor molecules to NiOx, thus mitigating the detrimental reactions between perovskite and NiOx. Equally importantly, the hole extraction at the interface was greatly enhanced after the organic donor modification, since the hydrophobic species atop NiOx not only enabled pinhole-free crystallization of the perovskite but also properly tuned the interfacial energy level alignment. Consequently, the PSCs with NiOx/BDT-POZ HTL achieved a high power conversion efficiency (PCE) up to 20.16%, which compared excellently with that of the non-modified devices (17.83%). This work provides a new strategy to tackle the exacting issues that have so far impeded the development of NiOx based PSCs. (c) 2021 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.

Spontaneous decoration of ionic compounds at perovskite interfaces to achieve 23.38% efficiency with 85% fill factor in NiOX-based perovskite solar cells

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells

Impact of nickel oxide/perovskite interfacial contact on the crystallization and photovoltaic performance of perovskite solar cells

Zwitterion Dual-Modification Strategy for High-Quality NiOx and Perovskite Films for Solar Cells

Rational Buried Interface Engineering of Inorganic NiOx Layer towards Efficient Inverted Perovskite Solar Cells

Tuning Surface Oxidation States of Nickel Oxide for Efficient Inverted Perovskite Solar Cells

Overcome Low Intrinsic Conductivity of NiOx through Triazinyl Modification for Highly Efficient and Stable Inverted Perovskite Solar Cells

D-p-D molecular layer electronically bridges the NiO<i><sub>x</sub></i> hole transport layer and the perovskite layer towards high performance photovoltaics

High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact.

Design of NiO x /Carbon Heterostructure Interlayer to Improve Hole Extraction Efficiency of Inverted Perovskite Solar Cells

Modulation on electrostatic potential to build a firm bridge at NiO x /perovskite interface for efficient and stable perovskite solar cells

Ionic liquid optimized buried interface between spray-coated NiOX and perovskite for efficient solar cells

Triple hole transporting and passivation layers for efficient NiOX-based wide-bandgap perovskite solar cells

Overcoming Ni 3+ ‐Induced Non‐Radiative Recombination at Perovskite‐Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Printable oil-NiOX hole transport layer enables efficient n-i-p perovskite solar cells with a high thermal stability

Surface Modification of NiO Nanoparticles for Highly Stable Perovskite Solar Cells Based on All-Inorganic Charge Transfer Layers

Surface Sulfuration of NiO Boosts the Performance of Inverted Perovskite Solar Cells

Bilateral Chemical Linking at NiOx Buried Interface Enables Efficient and Stable Inverted Perovskite Solar Cells and Modules